1. mikifantastik98

    mikifantastik98 GBAtemp Regular
    Member

    Joined:
    Dec 12, 2018
    Messages:
    233
    Country:
    Italy
    * /switch /.get ? ...what is this folder ?

    * exosphere.ini .... in the root ?

    * Sigpatch-Installer are out of date
    what kind of patch are you using for this package ???

    My package :
    Hekate 5.2.1 + Atmosphere 0.12.0 + latestHarukoNX

    Top Homebrews
    Awoo-Installer ( best Installer ever ! )
    KOSMOS Toolbox
    Homebrew Appstore
    ChoidujourNX
    EdiZon v3.1.0 - Nightly
    N-Xplorer
    ftpd snap!
    sys-clk-Editor
    ldn_mitm
    pplay
    NX Themes Installer
    amiigo
    NXdumptool
    Gamecard Installer NX
    switch cheats updater

    Top Overlays
    EdiZon Overlay
    emuiibo overlay
    sys-clk-Overlay
    FastCFWswitch
    TextReaderOverlay-NX
    Status Monitor
    ovlShareNX
    ovl-tune ( sys-tune )

    Top sysmodules
    sys-con
    sys-clk
    sys-ftpd-light
    emuiibo
    ldn_mitm
    sys-tune

    I hope it will be improved in the future !
     
    Last edited by mikifantastik98, May 27, 2020
  2. Synecdoche

    OP Synecdoche Member
    Newcomer

    Joined:
    Mar 27, 2019
    Messages:
    44
    Country:
    United Kingdom
    By default, the sigpatch installer is there to make it easier to update yourself if needed




    .get is for homebrew Appstore

    Exosphere goes in root

    I wasn't aware sigpatch installer is out of date, I grabbed the latest (I believe)

    Regardless, thank you for this, I can't improve if nothing is said or critism isn't made. After all this was for fun, not meant to get attention haha
     
  3. mikifantastik98

    mikifantastik98 GBAtemp Regular
    Member

    Joined:
    Dec 12, 2018
    Messages:
    233
    Country:
    Italy
    Last edited by mikifantastik98, May 27, 2020
  4. Synecdoche

    OP Synecdoche Member
    Newcomer

    Joined:
    Mar 27, 2019
    Messages:
    44
    Country:
    United Kingdom
    mikifantastik98 likes this.
  5. bluedart

    bluedart GBAtemp Regular
    Member

    Joined:
    Nov 13, 2016
    Messages:
    241
    Country:
    United States
    What's the latest firmware this works with? I'm looking to upgrade from Kosmos on 9.2.0 and I'll be needing sigpatches. Things seem to require 10.0.2 now.
     
  6. C7XL

    C7XL Advanced Member
    Newcomer

    Joined:
    Mar 27, 2020
    Messages:
    51
    Country:
    United States
    This should be for 10.0.3, if I'm not mistaken.
     
  7. blinky87

    blinky87 Advanced Member
    Newcomer

    Joined:
    Jan 15, 2014
    Messages:
    51
    Country:
    United States
    Hi, I put 2.2.1 on my sd card, but now the serial info shows in cfw. Previously I was using Kosmos and had used incognito 6.2 to hide the serial infos in cfw.

    I reran incognito 6.2 on the emummc but it didn't work to hide the serial info.

    Is there some way to get get it to work? Do I need to update emummc to the newest fw and try again? It is on 10.0.0 currently.
     
    Last edited by blinky87, Jun 7, 2020
  8. 808lordz

    808lordz Member
    Newcomer

    Joined:
    May 8, 2020
    Messages:
    12
    Country:
    Brazil
    I have been using VoidNX and it works great so far.

    Only things I did was to remove doubled folders inside the switch folder (there was 2 Gold Leafs, 2 Game-Card Installers, 2 Awoo Installers, etc) and Ive also added the FS & ACID patches. Thats all

    Works great!
     
  9. Synecdoche

    OP Synecdoche Member
    Newcomer

    Joined:
    Mar 27, 2019
    Messages:
    44
    Country:
    United Kingdom

    Is the exosphere.ini in the root of the sd card? Also it's only enabled for emuNAND, you were looking there right? If it doesn't work let me know and I'll double check one I get back to my pc.

    Hey thanks for letting me know, apparently I'm very bad at packaging Void and keep missing these stupid little things haha.

    I'll have a proper look when I'm back at my pc and not rushing out shitty releases in-between bouts of spare time.

    Any other issues please let me know by either messaging me or even better, on Discord.

    Also apologies for going slow on this, when Neptune came out I kinda just gave up, but thought screw it, why stop my own fun because some one else is having fun.
     
    KiiWii likes this.
  10. Synecdoche

    OP Synecdoche Member
    Newcomer

    Joined:
    Mar 27, 2019
    Messages:
    44
    Country:
    United Kingdom
    So I've been a way a while due to IRL work and messing about, pretty much downtime on this project because to be honest I didn't think anyone would care, especially with Neptune now out. I thought who would use this when there's something better?

    But then I remembered there is a few small people who use this and who am I to say fuck it, even if one person uses this, I'll keep it up.

    Do bare with me, I'll be updating Vöid in the coming days with the following:

    - A better boot logo
    - Fusee chain loading so HBG should work by default (it will not come with this package however) and for people who really hate the current boot method
    - A few more homebrew apps
    - All current Homebrew apps updated to the latest
    - Working (hopefully) Homebrew Appstore that shows what is currently installed
    - Another clean up because I'm useless at packaging apparently
    - An optional Lite version for people who don't want PC applications etc

    Thank you for the one or two who use this, and more importantly thank you for the kind words and gentle nudges I've gotten.
     
    klear, r5xscn and C7XL like this.
  11. jczoe

    jczoe Member
    Newcomer

    Joined:
    Jan 19, 2015
    Messages:
    13
    Country:
    ty for having a complete package. I appreciate it.
     
  12. blinky87

    blinky87 Advanced Member
    Newcomer

    Joined:
    Jan 15, 2014
    Messages:
    51
    Country:
    United States
    Thanks I like this better than Neptune!

    — Posts automatically merged - Please don't double post! —

    Hi, yes exosphere.ini is in the root. Only enabled for emuNAND? What do you mean? I booted into cfw emunand from hekate and checked the serial info from settings. Is that what you mean? I still see the serial infos there.
     
  13. 808lordz

    808lordz Member
    Newcomer

    Joined:
    May 8, 2020
    Messages:
    12
    Country:
    Brazil
    This is way better than Neptune. Thanks.
     
  14. Synecdoche

    OP Synecdoche Member
    Newcomer

    Joined:
    Mar 27, 2019
    Messages:
    44
    Country:
    United Kingdom
    Void 3.0 is out now.

    It's a decent update, but the biggest change is it now uses Fusee Primary by chainloading through Hekate, so HGB Shop SHOULD work, however, I cannot test it at this time as the website is down and I can't find a download to test it, so please let me know if it works or not.

    All changes are tested and are working on a fresh SD Card and clean NAND this time. Except for HGB Shop.

    I can confirm the following works:

    • Atmosphere Incognito correctly removes your serial. You can check this in settings > system > serials and you should get [Three Letters]00000000 in your serial section.
    • Homebrew Appstore does correctly show you what is installed now.
    • Hekate loads Atmosphere correctly.
    • There are no more duplicates.
    • Installing and running games do work.
    • All Homebrew are up to date (Let me know if I missed one)

    Changes:

    • All Homebrew apps updated
    • Added the following:
      • VGEdit
      • Emuiibo
      • Amiigo
      • NX Theme Injecter
      • Status Monitor Overlay
      • SYS Tune Overlay
    • Updated Bootlogo, however, due to chainloading it doesn't work at the moment but added it anyway. But it looks nicer regardless.
    • Added a Vöid Lite, which does not include the Payloads and PC Tools
    • HB Appstore cache update and shows what you have installed.
    • General clean up, so with a fresh install of Vöid you will no longer get multiple of the same versions of Homebrew Apps.

    NOT TESTED
    • Hekate now boots by chainloading Fusee Primary, so HGB Shop should work, please let me know if this isn't the case as the website is down and I couldn't test it.

    Again, thank you for everyone who actually uses this, it's blown my mind even one person uses it to be honest. As I've said previously, I understand if you'd rather use something else, this is just for fun and the set up I use and I'm here to make everything noob friendly, but, if anything doesn't work, you'd like anything changed, or you'd like a general chat, please let me know here, in my DMs or on Discord.
     
    klear and layzMich3l like this.
  15. layzMich3l

    layzMich3l Member
    Newcomer

    Joined:
    Feb 29, 2020
    Messages:
    36
    Country:
    United States
    I am mostly a user of the not so loved OS but I like to keep Atmo on my switch for dual-booting if needed, thank you for making this for us!
     
  16. tend57

    tend57 Member
    Newcomer

    Joined:
    May 18, 2020
    Messages:
    22
    Country:
    Austria

    I installed your earlier Version and set it up on a emummc on a hidden partition using hekate. Can i just delete all files on my sd card and replace them with the new ones without deleting my games and saves?
     
  17. layzMich3l

    layzMich3l Member
    Newcomer

    Joined:
    Feb 29, 2020
    Messages:
    36
    Country:
    United States
    fyi sig patches are not updated for fused or something. Games did not work and had to download them myself :)
     
  18. Synecdoche

    OP Synecdoche Member
    Newcomer

    Joined:
    Mar 27, 2019
    Messages:
    44
    Country:
    United Kingdom
    That's correct yes

    Oh no, seriously? One day I'll release a proper version
     
    layzMich3l likes this.
  19. blinky87

    blinky87 Advanced Member
    Newcomer

    Joined:
    Jan 15, 2014
    Messages:
    51
    Country:
    United States
    Thanks for the new update! I still can't get incognito to work. Can you tell me what version of incognito you are using? Maybe I have a bad version.


    **Edit** Well, it is working sort of. It is changing the console serial number so that is good. I thought it was supposed to blank out all of the 3 serial numbers. Maybe v6.2 is different.
     
    Last edited by blinky87, Jun 8, 2020
  20. Synecdoche

    OP Synecdoche Member
    Newcomer

    Joined:
    Mar 27, 2019
    Messages:
    44
    Country:
    United Kingdom
    It only blanks out the serial of emuNAND, not all of them, if it's blanking the serial it's working.
     
Draft saved Draft deleted
Loading...

Hide similar threads Similar threads with keywords - Firmware, Another, Custom