USB1.0 flash drive is not reading

Discussion in 'Wii - Hacking' started by ChazZeromus, Jun 10, 2011.

Jun 10, 2011
  1. ChazZeromus
    OP

    Newcomer ChazZeromus Member

    Joined:
    Jun 7, 2011
    Messages:
    14
    Country:
    United States
    Hi I have a softmodded wii at home that's able to read any usb flash drive i throw at it, but over at my friend's house after hacking his, his wii refuses to read my usb1.0 drive, but is able to read another usb2.0 drive.
    The drive I'm trying to use is an HP v115w.
    This is what it looks like:
    [​IMG]

    Code:
    sysCheck v2.1.0b7 by Double_AÂÂÂÂÂÂÂÂÂÂÂÂ
    ...runs on IOS58 (rev 6176).ÂÂÂÂÂÂÂÂÂÂÂÂ
    ÂÂÂÂÂÂÂÂÂÂÂÂ
    Region: NTSC-UÂÂÂÂÂÂÂÂÂÂÂÂ
    System Menu 4.3U (v513)ÂÂÂÂÂÂÂÂÂÂÂÂ
    Homebrew Channel 1.0.8 running on IOS58ÂÂÂÂÂÂÂÂÂÂÂÂ
    Hollywood v0x21ÂÂÂÂÂÂÂÂÂÂÂÂ
    Console ID: 84091047ÂÂÂÂÂÂÂÂÂÂÂÂ
    Boot2 v4ÂÂÂÂÂÂÂÂÂÂÂÂ
    Found 107 titles.ÂÂÂÂÂÂÂÂÂÂÂÂ
    Found 50 IOS on this console. 6 of them are stub.ÂÂÂÂÂÂÂÂÂÂÂÂ
    ÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS3 (rev 65280): StubÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS4 (rev 65280): StubÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS9 (rev 1034): No PatchesÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS10 (rev 768): StubÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS11 (rev 16174): Trucha BugÂÂÂÂ NAND AccessÂÂÂÂÂÂÂÂ
    IOS12 (rev 526): No PatchesÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS13 (rev 1032): No PatchesÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS14 (rev 1032): No PatchesÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS15 (rev 1032): No PatchesÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS16 (rev 54321): Trucha BugÂÂÂÂ ES IdentifyÂÂÂÂ Flash AccessÂÂÂÂ NAND Access
    IOS17 (rev 1032): No PatchesÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS20 (rev 16174): Trucha BugÂÂÂÂ NAND AccessÂÂÂÂÂÂÂÂ
    IOS21 (rev 1039): No PatchesÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS22 (rev 1294): No PatchesÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS28 (rev 1807): No PatchesÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS30 (rev 16174): Trucha BugÂÂÂÂ NAND AccessÂÂÂÂÂÂÂÂ
    IOS31 (rev 3608): No PatchesÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS33 (rev 3608): No PatchesÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS34 (rev 3608): No PatchesÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS35 (rev 3608): No PatchesÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS36 (rev 3608): No PatchesÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS37 (rev 5663): No PatchesÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS38 (rev 4124): No PatchesÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS40 (rev 3072): StubÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS41 (rev 3607): No PatchesÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS43 (rev 3607): No PatchesÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS45 (rev 3607): No PatchesÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS46 (rev 3607): No PatchesÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS48 (rev 4124): No PatchesÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS50 (rev 14889): Trucha BugÂÂÂÂ NAND AccessÂÂÂÂÂÂÂÂ
    IOS51 (rev 4864): StubÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS52 (rev 5888): StubÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS53 (rev 5663): No PatchesÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS55 (rev 5663): No PatchesÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS56 (rev 5662): No PatchesÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS57 (rev 5919): No PatchesÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS58 (rev 6176): USB 2.0ÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS60 (rev 16174): Trucha BugÂÂÂÂ NAND AccessÂÂÂÂÂÂÂÂ
    IOS61 (rev 5662): No PatchesÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS70 (rev 16687): Trucha BugÂÂÂÂ NAND AccessÂÂÂÂÂÂÂÂ
    IOS80 (rev 6944): Trucha BugÂÂÂÂ NAND AccessÂÂÂÂÂÂÂÂ
    IOS90 (rev 54321): Trucha BugÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS202[57] (rev 65535): Trucha BugÂÂÂÂ NAND AccessÂÂÂÂ USB 2.0ÂÂÂÂ
    IOS222[38] (rev 65535): Trucha BugÂÂÂÂ ES IdentifyÂÂÂÂ NAND AccessÂÂÂÂ USB 2.0
    IOS223[38] (rev 4): Trucha BugÂÂÂÂ ES IdentifyÂÂÂÂ NAND AccessÂÂÂÂ USB 2.0
    IOS224[57] (rev 65535): Trucha BugÂÂÂÂ NAND AccessÂÂÂÂ USB 2.0ÂÂÂÂ
    IOS236[36] (rev 65535): Trucha BugÂÂÂÂ ES IdentifyÂÂÂÂ NAND AccessÂÂÂÂ
    IOS249 (rev 21004): Trucha BugÂÂÂÂ NAND AccessÂÂÂÂ USB 2.0ÂÂÂÂ
    IOS250 (rev 21004): Trucha BugÂÂÂÂ NAND AccessÂÂÂÂ USB 2.0ÂÂÂÂ
    IOS254 (rev 65281): BootMiiÂÂÂÂÂÂÂÂÂÂÂÂ
    BC v6ÂÂÂÂÂÂÂÂÂÂÂÂ
    MIOS v10ÂÂÂÂÂÂÂÂÂÂÂÂ
    ÂÂÂÂÂÂÂÂÂÂÂÂ
    Report generated on 2011/06/10.
     
  2. Porobu

    Member Porobu Gbatemps Shiny Latias

    Joined:
    Sep 12, 2009
    Messages:
    1,042
    Country:
    Spain
    Cios are not compatible with all USB devices
    But is REALLY a USB 1.0 device?
    I dont think the wii can support that
     
  3. ChazZeromus
    OP

    Newcomer ChazZeromus Member

    Joined:
    Jun 7, 2011
    Messages:
    14
    Country:
    United States
    my other wii supports it just fine, perhaps its a cios version i have that needs updating?
     
  4. obcd

    Member obcd GBAtemp Advanced Maniac

    Joined:
    Apr 5, 2011
    Messages:
    1,594
    Country:
    Belgium
    Wii's can be very picky about what drives they accept.
    As yours is a 16Gb, I doubt it's a usb 1.0 drive.
    I have tried a couple of memory sticks on my wii, and none of them works.

    It's strange that some sticks work on one wii and not on another.

    The HBC 1.08 uses ios 58. That should be identical for every wii.

    Maybe it's a hardware issue, and his usb connector is not making contact very well with your stick. (As I see they removed half of the connector shell of that stick.)

    I have such issues with my pc usb port, as it was used very often to plug unplug my usb drive. Usb connectors are not the most reliable.
     
  5. ChazZeromus
    OP

    Newcomer ChazZeromus Member

    Joined:
    Jun 7, 2011
    Messages:
    14
    Country:
    United States
    It has to be a problem with the cios, why would it work so well with my wii and not his? the drive fits fine, nice and tucked in tho.
     
  6. obcd

    Member obcd GBAtemp Advanced Maniac

    Joined:
    Apr 5, 2011
    Messages:
    1,594
    Country:
    Belgium
    As I told you, put a homebrew on the stick and select the homebrew channel. Press 1 and select the usb drive. See if it reads from the usb drive.
    With some of my drives, I have to shutdown and restart the wii before the hbc reads from the usb drive.
    The hbc 1.08 uses ios 58. So, even if you have different cios, this can't be the issue. ios58 is the only standard ios with usb 2.0 support.
     
  7. ChazZeromus
    OP

    Newcomer ChazZeromus Member

    Joined:
    Jun 7, 2011
    Messages:
    14
    Country:
    United States
    That's the thing, it doesn't read it at all, there's no detection of the flash drive whatsoever. HBC does not detect my hp flash drive.

    EDIT: Yeah you guys were right, it IS working now. The contacts weren't touching, I guess this wii had a bit of faulty manufacturing. So word of advice to anyone who has that flash drive: Stick it in HARD
     
  8. PsyBlade

    Member PsyBlade Snake Charmer

    Joined:
    Jul 30, 2009
    Messages:
    2,204
    Location:
    Sol III
    Country:
    Germany
    the drive being faulty would explain the usb1 part too
    maybe the connection is so crappy your pc just thinks its usb1

    imho nobody in their right mind would design a 16gb usb1 drive
    under optimal conditions it would still take 5h+ to read or write fully
     

Share This Page