Homebrew Homebrew app Ultrahand Overlay - The fully craft-able overlay executor

[johw]

well, i'm not really sure if its help, but try to use fresh Ultarhand, first delete your Ultrahand ovl in folder /switch/.overlays, and delete Ultrahand folder in /config/ultrahand, after that restart and copy new update Ultrahand, and run for the first time, and check the folder ultrahand in /config/ultrahand, you should find 2 zip file nx-ovlloader inside it.

** don't forget to backup folder in /config/ultrahand first, in case you use some custom setting.

It worked, thanks.
I wanted to know how you created this command and where the text file is?

 

[Raphaelinez]

It worked, thanks.
I wanted to know how you created this command and where the text file is?

the text file in folder /switch/.packages/package.ini
here, try to use my code, see the difference. just delete the stuff you don't like or edit whatever you want.

[System]
[Auto Brightness]
;mode=toggle
on:
backlight auto on
off:
backlight auto off

[Brightness]
;mode=step_trackbar
;min_value=0
;max_value=100
;units=%
;steps=11
;on_every_tick=true
backlight {value}

[Volume]
;mode=trackbar
;min_value=0
;max_value=150
;units=%
;on_every_tick=true
volume {value}

[Power]
[*Reboot To]
ini_file_source /bootloader/hekate_ipl.ini
filter config
reboot boot '{ini_file_source(*)}'

[*Hekate Entry]
[Hekate]
reboot HEKATE
[Hekate USB Mass Storage]
reboot UMS

[*Shutdown System]
[Shutdown]
shutdown

 

[johw]

the text file in folder /switch/.packages/package.ini
here, try to use my code, see the difference. just delete the stuff you don't like or edit whatever you want.

[System]
[Auto Brightness]
;mode=toggle
on:
backlight auto on
off:
backlight auto off

[Brightness]
;mode=step_trackbar
;min_value=0
;max_value=100
;units=%
;steps=11
;on_every_tick=true
backlight {value}

[Volume]
;mode=trackbar
;min_value=0
;max_value=150
;units=%
;on_every_tick=true
volume {value}

[Power]
[*Reboot To]
ini_file_source /bootloader/hekate_ipl.ini
filter config
reboot boot '{ini_file_source(*)}'

[*Hekate Entry]
[Hekate]
reboot HEKATE
[Hekate USB Mass Storage]
reboot UMS

[*Shutdown System]
[Shutdown]
shutdown

like this ?

 

[Raphaelinez]

like this ?

Yes, just see the overlay first to know the change.

 

[johw]

Yes, just see the overlay first to know the change.

thanks

 

[zonemo01]

I recommend going to the 60fps discord page where B3711 currently posts the latest revisions of OC Toolkit / EOS for more help.

You need the kip installed properly, sys-clk EOS installed properly, and the package ini's placed in `/switch/.packages/OC Toolkit/`. The .zip for installing includes the hierarchy for the SD card that must be mirrored.

Post automatically merged: Aug 29, 2024

View attachment 455207

View attachment 455209

I have many wallpapers, but here are a couple I made in case anyone wanted some.

Where can I find the wallpaper file so I can set these images as wallpapers?"

 

[johw]

Ultrahand Overlay 1.8.1
I'm using firmware 18.10 with atmosphere 1.80 pre-release with nx-ovlloader 1.09, so far working fine.

 

[svoc]

I am on firmware 19.0.1 and newest nx-ovlloader and atmosphere 1.8.0 as of 2 days ago ultra hand is not loading the menu

 

[Raphaelinez]

I am on firmware 19.0.1 and newest nx-ovlloader and atmosphere 1.8.0 as of 2 days ago ultra hand is not loading the menu

check Hekate Toolbox if module active or not.

 

[johw]

I am on firmware 19.0.1 and newest nx-ovlloader and atmosphere 1.8.0 as of 2 days ago ultra hand is not loading the menu

see the button sequence
here opens
ZL+ZR+

 

[ppkantorski]

Where can I find the wallpaper file so I can set these images as wallpapers?"

You can find all the wallpapers here on discord.

 

[svoc]

see the button sequence
here opens
ZL+ZR+

Been using ultra hand for about 6 months I know how to open it it does not run on new firmware at least with the patches I have but the 1.7.? Works just fine so I keep using that for now

 

[ppkantorski]

Been using ultra hand for about 6 months I know how to open it it does not run on new firmware at least with the patches I have but the 1.7.? Works just fine so I keep using that for now

You may need the updated nx-ovlloader for AMS 1.8.0+. Also, which version of Ultrahand are you using again? Its recommended to use 1.8.1 rn.

 

[johw]

You can find all the wallpapers here on discord.

Interesting, which folder do I put the files in?

 

[FrenezyFr]

Interesting, which folder do I put the files in?

SD:\config\ultrahand\wallpapers

 

[johw]

SD:\config\ultrahand\wallpapers

I put it in and there was no change

 

[ppkantorski]

I put it in and there was no change

For wallpapers, you need to enable Memory Expansion. (It is located under System)
Memory Expansion allows you to toggle on and off nx-ovlloader+ which is required for wallpapers, but you will need to reboot.

 

[johw]

For wallpapers, you need to enable Memory Expansion. (It is located under System)
Memory Expansion allows you to toggle on and off nx-ovlloader+ which is required for wallpapers, but you will need to reboot.

Thank you, it worked perfectly xD

 

[grchwks]

Hello! What a great tool—I’m still amazed by how incredible it is. I have a question and I’m not sure if it’s possible: when opening UltraHand, the overlays appear directly. Is there a way to display both overlays and commands on the same screen simultaneously? Or set commands as the initial screen and overlays as the secondary?

Thank you for such great work!

 

[johw]

@ppkantorski
A guy sent me something interesting about Fan Control, is it possible to put its overlay on Ultrahard?