[TUTORIAL] [Noob-Friendly] NAND Dumping 2DS/3DS/3DS XL/N3DS/N3DS XL!

That's why you need a good solder flux and heat from behind the board (shielding whatever you don't want to melt as well, of course)
I'm used to replace them... once you get used to, it's "easy"

 

Really appreciate the help man, I'll be back with updates.

 

Ignore it

 

Ok, i checked the points and did all it again, now its normal, without franken conected it Power On normal, with franken conected it power on Blue Screen, but all Nands i read are differents on validator. The nands are reading on 2.7249... mb/s .

If i read two times in a sequence the two nands are the same, but if i power of the console and read again the another nand become different. Why ?

 

for anyone wondering this reader https://www.amazon.com/dp/B00E2UTU3W/ is working with the N2DSXL

 

For New2DS XL Micro USB Hardmod

 

Its normal, sometimes when ou power up the 3ds he change a litthe part of the nand (but is a change).
Here I always make 3 reads and ever disconnect the reader and power off the 3ds between the reads, but not "normal" power on (for not occour changes).

 

Well tried my best to solder to clk114 point, absolutely cant get that to work, given up. Question is, is my ribbon cable dead (upper lcd is black, lower functions normally)

 

Thats it, Thanks, i did the modification and write, now i have my N2DSXL with Boot9Strap *--*

 

N3DS LL, I had a blue screen, but the computer didn't ask me to format, and the disk just appeared for a while. I use right reader and windows10. I saw others who could successfully read and write NAND with different error code. They are 03 or 05 but mine is 400, so I solder again and it displays 400 again. Does this error code is necessary？ What is the real problem with me？ I can't solder anymore becos the circuit board is going to stop working.

Anyone helps！thanks！

 

Which reader are you using? Use Anker. For me only the 4 slot Anler worked.

 

Anyone here success to change region for 2DS LL ? I done CTRNAND transfer but can't boot and can't go to recovery mode to safe update.

 

Fast question: its necessary solder the two "points" of n2DS XL? If yes, why?

 

I don't understand

 

It's not necessary, but since they have continuity already and are small anyway, why not just do it and have a stronger joint?

 

How do i remove the 6 screws that are on the border of the console do i use the same screwdriver i did when i remove the 2 screws?

 

No, you can make a miscelaneous with your prefered points if u wish hahaha . i used CMD from russians image, and CLK & DAT0 from console X points, the GND i use some one of the cartridge slot points.

 

Where can i buy hardmod kit already made . i have soldering experience

 

Use triwing (Y)
https://www.amazon.fr/gp/aw/d/B004C...s+tri-wing&dpPl=1&dpID=31+aup3UtbL&ref=plSrch

— Posts automatically merged - Please don't double post! —

Here
https://www.consolex-bordeaux.fr/content/kit-hardmod-nand-2ds-3ds-new3ds