1. zfreeman

    OP zfreeman GBAtemp Maniac
    Member

    Joined:
    Mar 9, 2013
    Messages:
    1,175
    Country:
    United States
    Ah, that's right. it might not be compatible with older firmware versions. It's been a while. You should bring it back from 5.00 CFW to 5.00 OFW before updating. http://downloads.pspspot.net/firmware/762-5-00-official-psp-firmware.html. After, updating to any 6.XX firmware should do the trick. You can update with the 6.61.PBP from here, just rename it 'EBOOT.PBP'.
     
    Last edited by zfreeman, Oct 9, 2017
  2. Pockie

    Pockie Member
    Newcomer

    Joined:
    Sep 16, 2017
    Messages:
    45
    Country:
    United States
    Oh, I updated it to 6.61 without bringing it to 5.00 OFW. Now running 6.61 PROMOD-C2p
     
  3. zfreeman

    OP zfreeman GBAtemp Maniac
    Member

    Joined:
    Mar 9, 2013
    Messages:
    1,175
    Country:
    United States
    There's always a slight chance the older CFW changed some things not compatible with OFW, so there's a greater chance of bricking. At least that's what the old forum posts say. Even then, it's a soft-brick and can be recovered, though it's a pain.
     
  4. Pockie

    Pockie Member
    Newcomer

    Joined:
    Sep 16, 2017
    Messages:
    45
    Country:
    United States
    So then, should I go back and do that or leave it as is?

    On another note, my old iso tool and Ultimate Vhs Menu does not seem to be working, know where I can get new ones?
     
  5. zfreeman

    OP zfreeman GBAtemp Maniac
    Member

    Joined:
    Mar 9, 2013
    Messages:
    1,175
    Country:
    United States
    The update and CFW installation was successful, so there's no need. I assume Wololo has the latest, but I'll have to look around.

    Iso Tool: http://wololo.net/talk/viewtopic.php?f=2&t=9644

    It looks like they didn't update Ultimate VSH Menu to be compatible with later firmwares. PRO's VSH menu is pretty serviceable. I think the additional settings that aren't there, are in the recovery menu.
     
    Last edited by zfreeman, Oct 9, 2017
    Pockie likes this.
  6. Pockie

    Pockie Member
    Newcomer

    Joined:
    Sep 16, 2017
    Messages:
    45
    Country:
    United States
    Alright have a 3000 and I got everything until the final step. When I try to open configuration it says its corrupt and it cant open it. Same for other things too like iso tool.
     
  7. zfreeman

    OP zfreeman GBAtemp Maniac
    Member

    Joined:
    Mar 9, 2013
    Messages:
    1,175
    Country:
    United States
    Run the Fast Recovery to enable CFW?
     
  8. Pockie

    Pockie Member
    Newcomer

    Joined:
    Sep 16, 2017
    Messages:
    45
    Country:
    United States
    it starts it and then turns off. nothing happens.
    The only two that start is fast recovery and the cfw should I try re-installing it?


    Update: Alright after it froze and rebooted I went back to the vcfw and I can now open the configuration and on the left is two options Pro and ME and on the right is says to update but when I click it says files cant be found
     
    Last edited by Pockie, Oct 27, 2017
  9. zfreeman

    OP zfreeman GBAtemp Maniac
    Member

    Joined:
    Mar 9, 2013
    Messages:
    1,175
    Country:
    United States
    Davee discontinued the updates because 1.03 caused bricks, so Update does not work. Just select the CFW you installed and exit out of the application. That's it.
     
    Pockie likes this.
  10. Pockie

    Pockie Member
    Newcomer

    Joined:
    Sep 16, 2017
    Messages:
    45
    Country:
    United States
    Got it, thanks once again.
     
    zfreeman likes this.
  11. jumpman1229

    jumpman1229 SUPER BOWL XLVII CHAMPIONS!!!
    Member

    Joined:
    Mar 2, 2013
    Messages:
    332
    Country:
    United States
    I have a PSP Go on 6.39, will this work for me?
     
  12. zfreeman

    OP zfreeman GBAtemp Maniac
    Member

    Joined:
    Mar 9, 2013
    Messages:
    1,175
    Country:
    United States
    It will. I recommend updating to 6.61 beforehand.
     
    jumpman1229 likes this.
  13. jumpman1229

    jumpman1229 SUPER BOWL XLVII CHAMPIONS!!!
    Member

    Joined:
    Mar 2, 2013
    Messages:
    332
    Country:
    United States
    Thank you! I just finished the process and it was quite easy
     
    zfreeman likes this.
  14. Kurama85

    Kurama85 Newbie
    Newcomer

    Joined:
    Feb 2, 2018
    Messages:
    1
    Country:
    United States
    So I am pretty much a total noob when it comes to this, but I have a series 3000 6.37-can I use the 6.61 method that you have posted in this thread?
     
    Last edited by Kurama85, Feb 2, 2018
  15. zfreeman

    OP zfreeman GBAtemp Maniac
    Member

    Joined:
    Mar 9, 2013
    Messages:
    1,175
    Country:
    United States
    With your 3000, if you want a permanent Custom FirmWare, your only option is this Infinity tutorial. That involves updating to 6.61.
     
  16. ctgchaos

    ctgchaos Newbie
    Newcomer

    Joined:
    Dec 7, 2005
    Messages:
    5
    Country:
    Belgium
    Does this make a permanent mod for PSP 3000 possible or not? I've been out of it all for a few years now and my PSP 2000 seems to be unresponsive after years, so I might need to get a new device...
     
  17. naddel81

    naddel81 GBAtemp Addict
    Member

    Joined:
    Dec 14, 2009
    Messages:
    2,331
    Country:
    United States
    Maybe try a new battery first?


    Gesendet von iPhone mit Tapatalk
     
  18. SaberLilly

    SaberLilly GBAtemp Regular
    Member

    Joined:
    May 26, 2017
    Messages:
    147
    Country:
    United States
    I did this on a 1000 series. It all went fine but the VSH menu seems to be non-persistant

    Fixed it, ignore this (EDIT)
     
    Last edited by SaberLilly, Mar 11, 2018
  19. naddel81

    naddel81 GBAtemp Addict
    Member

    Joined:
    Dec 14, 2009
    Messages:
    2,331
    Country:
    United States
    What advantage do I have when I upgrade from my 6.xx infinity custom firmware?


    Gesendet von iPhone mit Tapatalk
     
  20. godreborn

    godreborn Retired
    Member

    Joined:
    Oct 10, 2009
    Messages:
    12,135
    Country:
    United States
    afaik, none. you can spoof the firmware with a text file named I think version.txt in the seplugins directory. it should look like this:

    Code:
    release:6.61:
    build:4047,0,3,1,0:[email protected]
    system:[email protected]_661,0x06070010:
    vsh:[email protected]_661,[email protected]_661,20091118:
    target:1:WorldWide
    
    it will fail at psp downloads though, but you can pretend to be on the latest firmware. it's not worth upgrading past 6.60 though as a lot of plugins don't work, and its fixes are minimal. I think it only fixes bugs in like 2 games, plus ap fixes.
     
Draft saved Draft deleted
Loading...

Hide similar threads Similar threads with keywords - [Tutorial], Infinity, Firmware