Trying to follow some info on a recovery but its not manking sense. (error 160-0103 )

[SDIO]

Are there any non zero return codes in the install log?

 

[ulao]

Are there any non zero return codes in the install log?

Thewy seem to all be zero to me

OpenDir /vol/sdcard/wafel_install: 0
OpenMCP /vol/sdcard/wafel_install: 0
InstallInfo 0005001010040100: 00000000
Install 0005001010040100: 00000000
InstallInfo 0005001010041100: 00000000
Install 0005001010041100: 00000000
InstallInfo 0005001010043100: 00000000
Install 0005001010043100: 00000000
InstallInfo 0005001010044100: 00000000
Install 0005001010044100: 00000000
InstallInfo 0005001010045100: 00000000
Install 0005001010045100: 00000000
InstallInfo 0005001010047100: 00000000
Install 0005001010047100: 00000000
InstallInfo 0005001010048100: 00000000
Install 0005001010048100: 00000000
InstallInfo 0005001010049100: 00000000
Install 0005001010049100: 00000000
InstallInfo 000500101004a100: 00000000
Install 000500101004a100: 00000000
InstallInfo 000500101004b100: 00000000
Install 000500101004b100: 00000000
InstallInfo 000500101004c100: 00000000
Install 000500101004c100: 00000000
InstallInfo 000500101004d100: 00000000
Install 000500101004d100: 00000000
InstallInfo 000500101004e100: 00000000
Install 000500101004e100: 00000000
InstallInfo 000500101005a100: 00000000
Install 000500101005a100: 00000000
InstallInfo 0005001010062100: 00000000
Install 0005001010062100: 00000000
InstallInfo 0005001b10059100: 00000000
Install 0005001b10059100: 00000000
InstallInfo 0005001b10067100: 00000000
Install 0005001b10067100: 00000000
InstallInfo 0005001b10069100: 00000000
Install 0005001b10069100: 00000000
InstallInfo 0005003010010109: 00000000
Install 0005003010010109: 00000000
InstallInfo 0005003010011109: 00000000
Install 0005003010011109: 00000000
InstallInfo 000500301001010a: 00000000
Install 000500301001010a: 00000000
InstallInfo 000500301001110a: 00000000
Install 000500301001110a: 00000000
InstallInfo 00050030100111ff: 00000000
Install 00050030100111ff: 00000000
InstallInfo 000500301001210a: 00000000
Install 000500301001210a: 00000000
InstallInfo 000500301001310a: 00000000
Install 000500301001310a: 00000000
InstallInfo 000500301001410a: 00000000
Install 000500301001410a: 00000000
InstallInfo 000500301001510a: 00000000
Install 000500301001510a: 00000000
InstallInfo 000500301001610a: 00000000
Install 000500301001610a: 00000000
InstallInfo 0005003010017109: 00000000
Install 0005003010017109: 00000000
InstallInfo 000500301001710a: 00000000
Install 000500301001710a: 00000000
InstallInfo 000500301001810a: 00000000
Install 000500301001810a: 00000000
InstallInfo 000500301001910a: 00000000
Install 000500301001910a: 00000000
InstallInfo 000500301006d10a: 00000000
Install 000500301006d10a: 00000000
InstallInfo 0005001010066000: 00000000
Install 0005001010066000: 00000000
InstallInfo 0005001b10042300: 00000000
Install 0005001b10042300: 00000000
InstallInfo 0005001b10042400: 00000000
Install 0005001b10042400: 00000000
InstallInfo 0005001b1004f000: 00000000
Install 0005001b1004f000: 00000000
InstallInfo 0005001b10050000: 00000000
Install 0005001b10050000: 00000000
InstallInfo 0005001b10051000: 00000000
Install 0005001b10051000: 00000000
InstallInfo 0005001b10052000: 00000000
Install 0005001b10052000: 00000000
InstallInfo 0005001b10053000: 00000000
Install 0005001b10053000: 00000000
InstallInfo 0005001b10054000: 00000000
Install 0005001b10054000: 00000000
InstallInfo 0005001b10056000: 00000000
Install 0005001b10056000: 00000000
InstallInfo 0005001b10057000: 00000000
Install 0005001b10057000: 00000000
InstallInfo 0005001b10058000: 00000000
Install 0005001b10058000: 00000000
InstallInfo 0005001b1005c000: 00000000
Install 0005001b1005c000: 00000000
InstallInfo 0005001b1005f000: 00000000
Install 0005001b1005f000: 00000000
InstallInfo 0005001b10063000: 00000000
Install 0005001b10063000: 00000000
InstallInfo 0005001b10065000: 00000000
Install 0005001b10065000: 00000000
InstallInfo 0005001b10068000: 00000000
Install 0005001b10068000: 00000000
InstallInfo 0005001b1006c000: 00000000
Install 0005001b1006c000: 00000000
InstallInfo 000500301001a10a: 00000000
Install 000500301001a10a: 00000000
InstallInfo 00050010100040ff: 00000000
Install 00050010100040ff: 00000000
InstallInfo 000500101000400a: 00000000
Install 000500101000400a: 00000000
InstallInfo 0005001010004000: 00000000
Install 0005001010004000: 00000000
InstallInfo 0005001010004001: 00000000
Install 0005001010004001: 00000000
InstallInfo 0005001010004009: 00000000
Install 0005001010004009: 00000000
Flush MLC: 0
SetInitialLaunch 0: 1
Flush SLC: 0

 

[SDIO]

Do you have another SD card to test?

But could also be bad dram

 

[ulao]

Do you have another SD card to test?

But could also be bad dram

What do I need to test, just copy all of it to the sd card and add back the setup? Then run it over?

 

[SDIO]

Yes. Also partition it

 

[ulao]

made and copied over to nerw card. Renamed my setup back, and ran it. It did the same thing but thins time blinking yellow afer blinbking blue.

gave up waiting and enjected and the yellow stopped clinking.

got here

OpenDir /vol/sdcard/wafel_install: 0
OpenMCP /vol/sdcard/wafel_install: 0
InstallInfo 0005001010040100: 00000000
Install 0005001010040100: 00000000
InstallInfo 0005001010041100: 00000000
Install 0005001010041100: 00000000
InstallInfo 0005001010043100: 00000000
Install 0005001010043100: 00000000
InstallInfo 0005001010044100: 00000000
Install 0005001010044100: fffbf442
InstallInfo 0005001010045100: 00000000
Install 0005001010045100: 00000000
InstallInfo 0005001010047100: 00000000
Install 0005001010047100: 00000000
InstallInfo 0005001010048100: 00000000
Install 0005001010048100: 00000000
InstallInfo 0005001010049100: 00000000
Install 0005001010049100: 00000000
InstallInfo 000500101004a100: 00000000
Install 000500101004a100: fffbf442
InstallInfo 000500101004b100: 00000000
Install 000500101004b100: fffbf442
InstallInfo 000500101004c100: 00000000
Install 000500101004c100: 00000000
InstallInfo 000500101004d100: 00000000
Install 000500101004d100: 00000000
InstallInfo 000500101004e100: 00000000
Install 000500101004e100: 00000000
InstallInfo 000500101005a100: 00000000

Will re run mlcrestorerdownloader and amke sure I have good files.

Post automatically merged: Sep 14, 2024

reran got lcinking blue then static.
removed setup and reran.

this time after the set up rebooted I ejected the card becaus last time it tried to run it again. Now I get teh wiiu logo and its stuck there. With a purple LED, so I powered it off and backl on.

ran all the wiiu setup stuff.
after I get to ther user created an I skip it, I get the 0103 back. What do you mean dram, wiiu has eDRAM but EDRAM its part of a processor. IS there a fix do that also?

 

[ulao]

The only part that is still confusing is

'Follow through with the initial setup. After the "settings" part of the setup, it will drop you back into minute, just select Patch (sd) and Boot redNAND again.'

based on your advice this shoudl read. "reboot". After I run the redNAND the first time, its a static blue led, so the only thing I can do is power off the unit. This text does not say that. Is there really nothing I need to do at that point except reboot?

Post automatically merged: Sep 16, 2024

I tried again, this time I didnt tell it to skip the linking of accounts, and asked it to link, but then told it not to link. For what ever reason that worked. I was able to finsh the wiiu setup. Once the main wiiu was loaded I tried to turn it off and back on now I'm stuck on the wqiiu load screen. the SD card is out, do I need to undo something else?

 

[SDIO]

You could dump the system crash logs in minute, maybe they tell us something.
Also with DRAM I mean the 4 physical DRAM chips around the SoC. Not the SRAM/eDRAM.
If it was one of those we could find out which one and replacing is also possible, but the diagnosis isn't that easy and replacing requires some fine bga rework.
So I would rather check everything else first.

 

[ulao]

The only log I have is the one I posted above ( is there another), but do you see my latest comment, I pickled another route and now it seem sto have worked, but I think I need to remove something to boot normaly?


I found this in minute

 

[SDIO]

The system crash logs, which you dump in minute in the backup and restore menu

 

[ulao]

saw two options for system crash, took the first. So boothibng and a stuck wiiu screen is not expected?

guessing those are just older logs, relevent part is

00;00;56;267: CSC: CODE: [HAA3-0110-1375]
00;00;56;267: ERPRC: Console status code: HAA3-0110-1375
00:00:56:392: MCP: life time number of fatal errors - 52

?

 

[SDIO]

1.log shows clearly a bad eMMC. After that it mostly just reports data corruption, which is not as clear, but would fit.

Later we get these strange unknown errors:

00:00:09:208: mdblk: err=-131078, unknown instance.
00:00:09:208: FSA: ### MEDIA ERROR ###, dev:mlc01, err:-2228230, cmd:25, path:/usr/save/system/no_delete/00050000
00:00:09:209: [ACP]ERROR:CheckExistence:898: failed to check existence of /vol/storage_mlc01/usr/save/system/no_delete/00050000/ (status = -196673)
00:00:09:210: FSA: ### UNKNOWN ERROR ###, dev:mlc01, err:-2228739, cmd:4, path:/usr/save/system/no_delete/00050000
00:00:09:210: [ACP]ERROR:ConvertFSAStatusToNnResult:287: Fatal FSA Error at mlc (-2228739)
00:00:09:210: [ACP]ERROR:CreateDir:759: failed to create "/vol/storage_mlc01/usr/save/system/no_delete/00050000/" (status: -2228739)

They don't tell the reason and I didn't see them before, but they seem to come from the driver for the eMMC. So it would also fit, it just looks a little strange.

Did you make sure to actually boot the redNAND every time, by using the second option in minute and not accidentally booting the sysnand?

 

[ulao]

Well the instructions at least for me are very unclear, as to why I ask so many questions. But with your help so far only step 7 I'm nott sure about.

Therefore I have to be more precies so that I do not get even more confused. My assumption is that you are asking about Select Patch (sd) and Boot ios redNAND. And yes that is the second option in the menues.

after I run that, I see the output posted on my post 8 (https://gbatemp.net/threads/trying-...ing-sense-error-160-0103.660497/post-10491273)

after that

1. Remove the wafel_setup_mlc.ipx -- so all I did was took out the sd and rrenamed the file)
   
   
2. Select Patch (sd) and Boot ios redNAND again. If everything worked, the initial setup should launch.
   (no longer required with latest minute) --Skipped completely as instructed.
   
   
3. Follow through with the initial setup. After the "settings" part of the setup, it will drop you back into minute, just select Patch (sd) and Boot redNAND again. -- As you said, I ignored all of this and just did a reboot. amd ran the second optino again.

Once I run it again, It spits out a bunch of text and then reboot the unit in to the wiiu screen. At this point I kept getting that error 160-0103, and just fouind out I can botch the user setup stepts to make it not spit out this error message. or I just got lucky that time, I honestly have no idea. I got my wiiu finaly back up and running and it plays games. So I turned it off, and now I can now boot.

It sounds like yout telling my I didnt fix anything? Any suggested steps?


FYI: I think the crashing is random and I also got a Error Code: 150-3032., sometimes I make it thru the wiiu setup otherties I do not. And if I rename the wafel_setup_mlc back it does not work the same way now. It blinks the LED but also boot in to the wiiu OS. I'm starting to thing the chips are in fact bad. I really have no way to know. Happy to keep trying things but if you think its a lost cause let me know.

chips, if you could point to the chips for me, I coudl try to replacde them. I have a surface soldering kit and I know I can remove them. REplacing maybe not so much but I can try it. Putting the chip in place and heating it up so hot seems like a bad idea but that is how others did it.