Tutorial  Updated

SX Core Mariko - what to do next & post-install guide for newbies

I just got my SX Core installed, and was quickly overwhelmed afterwards as a newcomer to Switch homebrew scene by the sheer amount of options, information and "best practices". This guide is aimed for those who've recently got into homebrew with their Mariko (v2, 2019) Switches, and will hopefully cover the most essential parts of what to do next right after you're done with installing SX Core.

Disclaimer: As mentioned, I've only recently got interested in the scene as well. So there might be mistakes and missing parts in this guide. Please feel free to comment if you notice any. This guide in no way makes any guarantees to you, so take anything below with a grain of salt. Don't PM me if your Switch is now broken or some homebrew app killed your cat.

0) Prerequisites
  • SX Core installed to your Mariko (v2) Switch as described in Xecuter website.
  • SX License activated through the Xecuter license page.
  • A microSD card: min. 64 GB, half of it (around 30GB) will be used by emunand. 128 GB is recommended. I use 512GB.
    • SD Cards nowadays are super cheap, and major titles can easily take 10 - 30 GB each, so when in doubt, go for the bigger one.
    • Check this guide here: https://www.nintendolife.com/guides/best-nintendo-switch-micro-sd-cards for the tips around speed & class of the SD card, it's important.
    • It's recommended to format this card to FAT32 first. Switch tends to format bigger cards (>64 GB?) exFat, so you'll need to do this on your PC.
So basically you need a Nintendo Switch that is ready to boot into CFW and has a sufficiently large microSD card.

For better protection, do not connect your Switch to Internet until you're done with this guide.

Tip: Ideally your Switch should be on the most recent supported firmware version. Currently 11.0.0 is, and most recent firmware (11.0.1) is not supported by SXOS. If you're on the most recent version, please read Appendix A below to learn more about Atmosphere.


1) First things first: backups
No, not those juicy "backups" you'd like to play until morning. I mean NAND backups. This is a very important step, as it might save you if/when your console is bricked for one reason or another, or if you'd like to ever go back to pre-CFW state of your Switch. DO NOT SKIP THIS.

NAND backup
  • Hold volume up button while powering up Switch to open up SX OS boot manager.
  • Select "Options", and then "NAND" from the sidebar.
  • Click on Dump NAND.
  • Wait until it's done. This will take a long time, easily an hour or so.
  • After it's finished, power off your Switch. Take out the SD card and plug it into your computer.
  • In sxos/backup/ directory you will see "boot0", "boot1" and a multi-part big file (that is your raw NAND), copy all of them to your computer.
  • After copying is done, remove the files from your SD card.
  • Make sure you never, ever lose those files. Upload them to cloud, take another backup elsewhere etc.
Tip: Since Raw NAND backup is rather large (around 30GB), it's a good idea to compress this file afterwards. It'll probably be compressed really well.
Tip #2: It's a good idea to check md5sums of files on your SD Card and your PC before deleting it from the card, to verify integrity.

Creating an emuNAND
An emuNAND is useful in multiple ways:
  • It lets you do all the hackery in a duplicate system that boots from your SD card, so you can still boot to a clean system if need arises (for playing games legitimately owned, or if your emuNAND is corrupted etc)
  • While it's not going to protect you %100 from bricks, it's still an additional protection against misbehaving or incompatible hacks, bugs etc.

Okay now the guide:
  • Again, open up SX OS boot manager as described above.
  • Select "Options" and then "EmuNAND". Click on "Create EmuNAND".
  • It's up to you to decide if you'd like to have a hidden partition or a flat file.
    • An hidden partition is better protected against accidental deletion by user or apps, and also "might" provide better protection against Nintendo's checks.
    • A flat file is easier to backup & restore if your SD card becomes corrupted.
  • This will take a long time. Expect more than an hour, possibly two or more.
  • After it reports successfully completed, reboot your Switch.
  • Hold "volume up" button again to show SX OS boot manager.
This time you'll see an orange "EmuNAND enabled" button over boot into CFW option. If you see this, now you have an emuNAND. Now click on "Boot custom FW" to boot from your EmuNAND.

From now on whenever you power up your Nintendo Switch, it will boot into EmuNAND-backed CFW, so you don't have to hold "volume up" and pick that option yourself.

The "Album" app
Before the next step, this is a good time to introduce you to the "Album" if you haven't been already.

Normally Album is an official app for you to view your screenshots & videos. It's the third application (blue icon) on the bottom row of your home menu.

SXOS replaces Nintendo's Album app with its own app, and this app offers capability to mount XCI, run homebrew, cheats, FTP server etc. among other things. Take a quick look into it now to get familiar.

Tip: Fret not, your official Album app is still there! If you hold "L" button (not ZL) and launch Album, it will open the official Album.

Backing up your keys
  • Power off your Switch, take out the SD card and plug it into your computer.
  • Download lockpick.nro (v1.2.6) from here: https://github.com/shchmue/Lockpick/releases
  • Copy lockpick.nro to your SD card root.
  • Plug the SD card back to Switch and power it on.
  • Go to Album App, find Lockpick under "Homebrew" section and run it.
  • Once you run lockpick it will dump your keys to SD card. Now you can close the app.
  • Power off your Switch, take out the SD card and plug it into your computer.
  • Find prod.keys file and copy it to your PC. Take multiple backups of this file.
2) Homebrew Store
Okay now we're done with backups! And ready for more exciting stuff: Homebrew Store!

Homebrew Store is the place where you can find many apps from the community: some very useful software, themes, games, emulators etc.


Okay, now the guide:
  • Go to https://github.com/fortheusers/hb-appstore/releases and download the latest appstore.nro
  • Power off your Switch, take out the SD card and plug it into your computer.
  • Copy appstore.nro to your SD card root.
  • Plug the SD card back to Switch and power it on.
  • Go to Album App, find HB App Store under "Homebrew" section.
  • Since you don't have Internet yet, leave Homebrew Store here for now. You can always come back to it later.
Now you have Homebrew Store. Be careful that not everything you see there is good for your Switch, and especially since you have a Mariko Switch -which is only very recently became capable of running homebrew- some applications there won't properly support your device and might lead to bricks.

Always check this GBATemp thread: https://gbatemp.net/threads/sx-core-mariko-list-of-non-compatible-tools.567803/ before installing something.

3) Measures against getting banned
Now it's the time to take some precautions against getting banned.

Most important thing to know here is that this is no exact science. You can follow everything here and more, and you might still get banned. Bear in mind that you're basically running closed-source software from a company that wants to monitor your usage. Embrace the ban. If you're not willing to get a ban, CFW is a poor choice for your Switch.

Stealth Mode
SX OS has a feature called Stealth Mode. I can't tell you what it exactly does, as it doesn't seem to be documented, or reachable over a casual Google search. Anyway it's better to have it then not.


By default Stealth Mode is enabled. So all you need is to verify it indeed is:
  • Launch Album app.
  • Go to Options tab.
  • If you see Stealth Mode is ENABLED, you're done.
  • If it's DISABLED, enable it.
Incognito
Incognito is an homebrew app that removes some identifiable information from PRODINFO. Bear in mind that, it doesn't mean it removes ALL identifiable information. So this does not offer %100 protection against bans.

IMPORTANT NOTES:
  • Only use the Incognito.nro file below. Do not install it from somewhere else. This will also protect you from installing "incognito_rcm" by accident, which is a guaranteed brick for Mariko Switches.
  • It's reported that in some rare cases Incognito.nro might brick a Mariko Switch as well. If this happens to you, you will need to recreate the EmuNAND.

Now we took it out of the way, we can start with the guide:
  • Power off your Switch, take out the SD card and plug it into your computer.
  • Download Incognito from here: https://github.com/blawar/incognito/releases (v1.5)
  • Copy incognito.nro to your SD card root.
  • Plug the SD card back to Switch and power it on.
  • Go to Album App, find Incognito under "Homebrew" section and run it.
  • It will ask you to confirm the operation. Confirm it.
    • Even though Incognito creates a backup of your PRODINFO.bin, You must have followed the previous steps and created a NAND backup and prod.keys backup as well.
  • After Incognito is done, power off your Switch, take out the SD card and plug it into your computer.
  • Find backups/PRODINFO.bin file and copy it to your PC and multiple places.
    • Losing this file and/or NAND backups will mean you've now effectively banned yourself. Don't lose them.
  • Now you're done.
90dns
90dns is a volunteer DNS service that makes it harder for your Switch to contact Nintendo by blocking requests on DNS level. This is of course not perfect by nature, but still offers an additional layer of protection.

90dns has some drawbacks:
  • It tends to mess up your system clock if time is set automatically. So don't be surprised if your Switch starts showing wrong date/time or Tinfoil starts acting up because of SSL validity checks.
    • You can manually set the correct date & time.
  • It might affect your download speeds. Though I haven't noticed anything major myself, this is indeed possible if it messes up CDN geolocation etc.
If you'd like to enable this extra protection, GBATemp already has a guide on how to enable it: https://gbatemp.net/threads/90dns-dns-server-for-blocking-all-nintendo-servers.516234/

Tip: You can also use "90dns testing utility" from Homebrew Store to verify that it works.

Disabling error telemetry
Now, open up Settings, and go to "System" tab. There you will see "Share Error Information" option, make sure it's off.

---
And now you have enabled the most popular ways of ban evasion to hopefully decrease your chances of getting a ban. After this, you might want to take up some principles as well. What principles you take up is up to you, as I've mentioned, there is no exact science.

Most effective way is to never let your Switch go online ever, but that'll also be quite limiting. My personal way is as follows, mind that it's based on just my "gut feeling" and nothing more:
  • I never launch games while online, and never ever login to eShop or let Switch update titles on its own when prompted.
  • I keep my switch on Flight Mode all the time, except when I'm installing homebrew or if for some reason I need Internet connectivity.
    • Hint: By default Flight Mode will also disable BT (remote joycons won't work) and NFC (amiibo). This behaviour can be easily changed from Settings. (Sadly doesn't seem to be retained for long)
    • Hint: You can't enable Flight Mode while your Switch is docked. Always enable Flight Mode before you dock your Switch, then it will keep the last mode.
If you're not going to ever go online (best protection), then of course it's better to simply remove all known WiFi devices as well from Settings.

Now you're done with the measures, you can set up your WiFi connection if you prefer, or not.

4) Installing Tinfoil
Tinfoil is a title management app. It lets you install backups, manage installed games, has a file explorer and such.

  • You can install Tinfoil downloading the NRO here: https://tinfoil.io/Download
  • By this point you already know what to do next: get the NRO and other files in your SD card root, run it from Album app.
  • If you're willing to enable WiFi, now you can also make use of FTP server feature in the Album app so you won't need to move SD card around all the time.
Bear in mind that some features (like Incognito) is not supported on Mariko and might lead to a brick. Though most recent versions of Tinfoil now removed that harmful option for Mariko Switches.

Tip: Apps like Tinfoil and HBG are sensitive to clock errors. If you have any issues, make sure your Switch's time & date is set correctly.

5) Status of piracy on Switch
To keep this guide in good standing and of course, to not promote piracy, there won't be any guidance on how to get pirated content on your Switch. Information below is a simple overview to report on well known services, to satiate your curiosity:

People generally get their pirated content from one of these two sources:
  • Classic way of downloading them off Internet to their PC or Switch. These files are either in .NSP or .XCI format.
    • .NSP formatted ones get installed to Switch like any other legitimately installed game. That means they are the ones with best compatibility and ease of use, but also the most easily detectable ones.
    • .XCI formatted ones are like images. They can be mounted from Album app and act like game carts.
  • "Shops" like HBG, JITS, QuotaShop etc. Those shops all enable people to download games directly through Tinfoil app. This is similar to FreeShop in 3DS era. (Not from Nintendo CDN though).
6) Saves
Now you have a hacked Switch, you're not bound by the limitations around save files anymore. Simply search for "JKSV" app in Homebrew Store, or get the NRO here: https://github.com/J-D-K/JKSV/releases/

After launching JKSV, you can simply dump all saves by pressing Y. After it's done, all your saves will be copied to your SD card.

Try your best to copy your saves often to your PC. Otherwise if your emuNAND or SD card itself gets corrupted, you will lose all saves.

Tip: An earlier version of this guide recommended Checkpoint instead of JKSV. While it's still a valid option, Checkpoint currently does not support "device saves", which means you can't back-up some popular games such as AC:NH and Mario Kart 8 with Checkpoint. JKSV already has this support.

7) What next
Congratulations! Now you have a backed up, somewhat protected CFW-enabled Switch and you know how to get homebrew and game backups installed already!

What comes next is up to you. For most, that's already all you wanted. And while homebrew is all fun and games, there's always the risk of messing something up, especially if you're not paying attention. Always make use of the list here: https://gbatemp.net/threads/sx-core-mariko-list-of-non-compatible-tools.567803/ before installing anything major.

If you're into tinkering, you can:
  • install various emulators and games in Homebrew Store. For emulators, give RetroArch and PPSSPP a try.
  • mod your games
  • try streaming games from your PC to Switch with Moonlight
  • use your unofficial controllers with Switch, or use your Joycons with your PC.
  • enable local wireless play over online, as a poor man's Nintendo Switch Online platform. Good thing is you don't have to pay for this one, and it doesn't ban you. Details here: https://gbatemp.net/threads/ldn_mitm-play-local-wireless-supported-games-online.525512/
  • try themes, overclocking etc. etc.

Appendix A) What about Atmosphere?

This is an additional section for those who are interested in switching to Atmosphere, an alternative CFW, from SXOS.

Most popular reason for switching to Atmosphere is the bleak future of SXOS. Heads of TX, the team behind SXOS and Core chips are now in legal trouble, and it's not clear if SXOS will ever be updated in the future.

Atmosphere is a widely used, open source and very well regarded option, mainly developed by SciresM who has an excellent reputation in the homebrew scene.

In comparison to SXOS, Atmosphere:
  • Supports the most recent firmware version, 11.0.1.
  • Does not come with built-in support for XCI loading or loading from HDD.
  • Does not allow unsigned NSP to run, which also prevents piracy.
  • Is free, requires no license to work and has no license checks.
  • Has no legal issues currently, and in active development.
  • Has better & wider support for homebrew apps and KIPs.
  • Is currently much faster in keeping compatibitility with new firmware versions.
  • Is generally considered to be more stable.

For a detailed guide on migration from SXOS to Atmosphere, please refer to GCS's awesome guide here: https://gbatemp.net/threads/running-atmosphere-on-patched-sx-core-switch.574083/


A few tips before you start:
  • Make sure you've backed up all your saves and important data (such as backups and .dat files) to your PC before attempting this, as it comes with a non-zero chance of bricking & losing access to your data.
  • I'd personally suggest taking the route of EmuNAND migration, instead of spacecraft-NX.
  • If you have ever updated your emuNAND through ChoidujourNX, you'll need to backup your boot0/boot1 from SysNAND using NxNandManager and restore to your emuNAND partition.
    • Otherwise you won't be able to boot, and Atmosphere will complain about HOS version not being readable.

Have fun!
 
Last edited by arawitch,

Softmist18

Member
Newcomer
Joined
Aug 26, 2020
Messages
13
Trophies
0
Age
31
XP
105
Country
Philippines
thanks to this guide i was able to finally have my mariko switch turned into CFW switch and a lot of portals to more enjoyment of the switch .. by the way i need help on this guide

since i still have a physical game that i want to play online but i just dont ge how i can play online with it ?

should i boot to the FW firmware and play there ? and is it ideal to have 1 sd card full of nsp or xci and 1 for my official ? or any tip you can share with me will be greatly appreciated and up for your post! its a very amazing guide fool proof
 

Turbinetester

Well-Known Member
Newcomer
Joined
Aug 31, 2016
Messages
47
Trophies
0
XP
209
Country
United States
OK so i'm feeling kind of dumb but i just got my switch back from SX Core installer. I think the license must already be activated because i don't see a way to activate it. I am lost at this step in the guide...

This time you'll see an orange "EmuNAND enabled" button over boot into CFW option. If you see this, now you have an emuNAND.

The "Album" app
Before the next step, this is a good time to introduce you to the "Album" if you haven't been already.

SXOS replaces Nintendo's Album app with its own app, and it offers capability to mount XCI, run homebrew, cheats, FTP server etc. among other things. Take a quick look into it now to get familiar.

Tip: Fret not, your official Album app is still there! If you hold "L" button (not ZL) and launch Album, it will open the official Album.


I have the EmuNAND enabled, but i don't know what to do next to launch "Album"? Do i shut the console down and boot without holding down the Volume+key? Do i always boot to EmuNand by holding Vol+/PowerOn and choosing it from the SX OS menu? Sorry for the noob questions i just really don't want to get this console banned by doing something stupid. Thanks for the help.
 
Last edited by Turbinetester,

nitroflux

Active Member
Newcomer
Joined
Jul 1, 2020
Messages
25
Trophies
0
Age
74
XP
117
Country
United Kingdom
Thanks for writing this guide, arawitch! My SX Core was delivered today, so I'm trying to ingest everything I can related to it - your guide answers a lot of general queries I had - good work!
 

zlicepoke

New Member
Newbie
Joined
Aug 11, 2020
Messages
4
Trophies
0
Age
37
XP
78
Country
Indonesia
Thank so much for the guide!! I followed all the steps in the guide and was able to install a smaller 4gb game and it worked but how i can install bigger than 4gb? if i format microsd on exfat console didnt work, just get a black screen, someone can help me please??

--------------------- MERGED ---------------------------

Thank so much for the guide! I followed all the steps in the guide and was able to install a smaller 4gb game and it worked but how can i install a game bigger than 4gb? if i format microsd on exfat console didnt work, i just get a black screen after the nintendo logo, someone can help me please? I chose the option of hidden partition in emunand step, sorry for my english!

I followed this guide, actually we have to get the exFAT update from Nintendo before we start installing sxcore. I don't find any clue of updating exfat for V2 after sxcore installed.

Btw, how to update Switch firmware after sxcore installed?
 

arawitch

Member
OP
Newcomer
Joined
Jul 17, 2020
Messages
15
Trophies
0
Age
36
XP
167
Country
Germany
OK so i'm feeling kind of dumb but i just got my switch back from SX Core installer. I think the license must already be activated because i don't see a way to activate it. I am lost at this step in the guide...

This time you'll see an orange "EmuNAND enabled" button over boot into CFW option. If you see this, now you have an emuNAND.

The "Album" app
Before the next step, this is a good time to introduce you to the "Album" if you haven't been already.

SXOS replaces Nintendo's Album app with its own app, and it offers capability to mount XCI, run homebrew, cheats, FTP server etc. among other things. Take a quick look into it now to get familiar.

Tip: Fret not, your official Album app is still there! If you hold "L" button (not ZL) and launch Album, it will open the official Album.


I have the EmuNAND enabled, but i don't know what to do next to launch "Album"? Do i shut the console down and boot without holding down the Volume+key? Do i always boot to EmuNand by holding Vol+/PowerOn and choosing it from the SX OS menu? Sorry for the noob questions i just really don't want to get this console banned by doing something stupid. Thanks for the help.

That step is all about introducing you to the Album app, as it now has two functions:

a) If you just launch it from your home menu (by selecting third icon below your games), it will open up SXOS menu instead of official Album app, and it offers capability to mount XCI, run homebrew, cheats, FTP server etc.

b) If you launch it while holding "L" button, it will launch the real Album app for viewing your screenshots as it always did.

So, at this step you'll just need to start the Album app as usual, notice that SXOS menu replaced it, and discover its features. This introduction will give you the knowledge you will need on next steps, ie. wherever you're asked to "go to Album app".
 
Last edited by arawitch,

arawitch

Member
OP
Newcomer
Joined
Jul 17, 2020
Messages
15
Trophies
0
Age
36
XP
167
Country
Germany
I followed this guide, actually we have to get the exFAT update from Nintendo before we start installing sxcore. I don't find any clue of updating exfat for V2 after sxcore installed.

Btw, how to update Switch firmware after sxcore installed?

You can update your Switch firmware through choidujournx. Here: https://gbatemp.net/threads/choiduj...ller-homebrew-for-the-nintendo-switch.513416/

Bear in mind that choidujournx is known to brick Mariko Switches. IIRC it should be safe now for EmuNand updates if you have already updated SX Core firmware to v1.3 and have SX OS 3.0.4 Beta. I haven't tried it myself so I can't vouch for it, it'd be a good idea to verify this information here on GBATemp or Team Executer's chat server (it's quite active) before you attempt an update.

BTW I've now updated the guide and added a tip for updating Switch before installing SX Core, so you shouldn't need to use choidujournx for a good while if you do it that way.

---

@Softmist18

In my opinion the ideal way would be to have an emuNand as described in the guide, and doing all your CFW activity there. Then whenever you want to play your legit copy, you can boot into sysNand (you can open boot manager by holding volume up button while powering up Switch) and go online there.

Of course, by going online with a hacked Switch you will be risking a ban either way. This -at best- can improve the odds in your favor.
 
Last edited by arawitch,

Turbinetester

Well-Known Member
Newcomer
Joined
Aug 31, 2016
Messages
47
Trophies
0
XP
209
Country
United States
07dad6bed070327c4256c0d0b4b367f5.jpg

It seems I’m getting an error when dumping the Tegra keys... is this normal?


Sent from my iPhone using Tapatalk
 

Turbinetester

Well-Known Member
Newcomer
Joined
Aug 31, 2016
Messages
47
Trophies
0
XP
209
Country
United States
So, at this step you'll just need to start the Album app as usual, notice that SXOS menu replaced it, and discover its features. This introduction will give you the knowledge you will need on next steps, ie. wherever you're asked to "go to Album app".

THat was my problem...the guide left off at "Look here is the emuNAND enabled" orange indicator. It didn't say to actually boot the switch into CFW or OFW and didn't say where the album was located. I literally took my switch out of the box, packed it into an envelope and mailed it to the installer of my SX Core chip. I ahd no idea what to do and don't want to get the console banned. For some, that missing step is obvious, but for me i didn't know what to do. There was no "Power off your unit now, and then boot into CFW by simply pressing the power button for 1-2 secs..."
 

zlicepoke

New Member
Newbie
Joined
Aug 11, 2020
Messages
4
Trophies
0
Age
37
XP
78
Country
Indonesia
You can update your Switch firmware through choidujournx. Here:

Bear in mind that choidujournx is known to brick Mariko Switches. IIRC it should be safe now for EmuNand updates if you have already updated SX Core firmware to v1.3 and have SX OS 3.0.4 Beta. I haven't tried it myself so I can't vouch for it, it'd be a good idea to verify this information here on GBATemp or Team Executer's chat server (it's quite active) before you attempt an update.

BTW I've now updated the guide and added a tip for updating Switch before installing SX Core, so you shouldn't need to use choidujournx for a good while if you do it that way.

---

@Softmist18

In my opinion the ideal way would be to have an emuNand as described in the guide, and doing all your CFW activity there. Then whenever you want to play your legit copy, you can boot into sysNand (you can open boot manager by holding volume up button while powering up Switch) and go online there.

Of course, by going online with a hacked Switch you will be risking a ban either way. This -at best- can improve the odds in your favor.

Thanks for your tutorials, tips, and replies.

Still I am suggesting to update exfat driver before sxcore installation, if later on they want to for for fat32 it is still easier than getting the exFAT after sxcore.

Btw, I am thinking of doing these steps:
- boot to OFW
- insert microsd exfat
- update to get exfat
- power off switch
- copy all the sxos files to exfat microsd
- boot to CFW
Dunno if it will work though, or it might get bricked by doing so. Any thoughts?

Anyway, is it possible and safe to update online after update the fw using choi? What I know is it is safe to update online before we ever use choi.
 

cyph3rr

Active Member
Newcomer
Joined
Mar 28, 2020
Messages
35
Trophies
0
XP
249
Country
Canada
Question,
My emunand is made in files; however, i would like to get it as a hidden partition now that i have backup my nand.

what is a good process to do this? Will I lose my licence.if I copy all the files to my computer. And copy back to the sd card. Will that suffice?

is the best way to delete emunand to do ot via the sx os menu by choosing delete emunand?
 

HenryMin

Well-Known Member
Member
Joined
Jun 19, 2020
Messages
141
Trophies
0
XP
1,136
Country
Korea, South
Question,
My emunand is made in files; however, i would like to get it as a hidden partition now that i have backup my nand.

what is a good process to do this? Will I lose my licence.if I copy all the files to my computer. And copy back to the sd card. Will that suffice?

is the best way to delete emunand to do ot via the sx os menu by choosing delete emunand?

Copy all things in your sd card to pc and make partition emunand using

https://github.com/eliboa/NxNandManager/releases/tag/v4.1

from your nand backup (file emunand)

And then copy things back to your sd card. (Except file emunand :P)

You will not lose your license.
 

cyph3rr

Active Member
Newcomer
Joined
Mar 28, 2020
Messages
35
Trophies
0
XP
249
Country
Canada
Last edited by cyph3rr,

bibititou

Member
Newcomer
Joined
Aug 30, 2020
Messages
18
Trophies
0
Age
26
XP
102
Country
France
Hey, is this possible to follow this tutorial even with an Ipatched V1 Switch ? Because I have seen nothing about this model, only for Mariko...
Thanks :)
 

PECONAUT

Well-Known Member
Member
Joined
Jan 19, 2015
Messages
143
Trophies
0
Age
28
XP
388
Country
United States
@arawitch can you please add to the guide to make sure that EMUNAND has the right time (clock) because I was not able to access the HGB shop due to incorrect time
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
    Sicklyboy @ Sicklyboy: *teleports behind you* "Nothing personnel, kiddo" +1