1. guillel90

    guillel90 Newbie
    Newcomer

    Joined:
    May 18, 2019
    Messages:
    9
    Country:
    Spain
    Hi. I am about to receive the sx lite. Is there any good installation video??
    I have good solder skylls but i prefer to have a videoguided tutorial anyway.
    Thanks in advance!!
     
  2. s2m

    s2m Member
    Newcomer

    Joined:
    May 31, 2018
    Messages:
    15
    Country:
    United Kingdom
    Sent you DM with link
     
  3. Litvinkov

    Litvinkov Member
    Newcomer

    Joined:
    Apr 13, 2020
    Messages:
    17
    Country:
    Ukraine
    So, after waiting for a long time to install this, i tried it and failed. Burned sp2 off((
    The console still starts and works for some reason... should i expect it to fail at some point because sp2 is burned?
    Also, are all 0201 capacitors the same? i have an old broken geforce 650gtx and there are also a lot of those capacitors around the processor there, so could it be possible to get one from there and put it on the switch?
     
    Deleted User likes this.
  4. Deleted User

    Deleted User Newbie

    Tegra caps:

    CAP CER 1UF 6.3V X5R 0201

    Stuck at switch logo caps: (Side of tegra)

    CAP CER 0.1UF 6.3V X5R 0201
     
    Last edited Aug 1, 2020
    Modificatorul likes this.
  5. TreeFarm

    TreeFarm Newbie
    Newcomer

    Joined:
    Jul 3, 2020
    Messages:
    4
    Country:
    United States
    Well I got my Switch lite back from @ModderFokker619 Thursday. A little review of his services. I had pre-ordered a chip months ago and was planning on installing it myself. Well I couldn't wait any longer for it to show up as I have a trip coming up out of the country. I wanted my modded lite with me for it.

    I wont say how much I paid since he may change his prices. I feel like I got extreme value for the price paid. He provided and installed the chip. Updated the switch, setup emunand, and everything else with SXOS. It took 1 week from dropping it off at the post office, to having it back in my hands. I feel like there could have been some things done better, the shield could have been straightened a bit, the thermal paste on the heat pipe could have been changed. But given the price, the turn around time, and the fact that he is pumping out these installs, I am not complaining. Realistically my nit picks make no difference to functionality and they shouldn't deter you from using his service.

    I highly recommend him for anyone needing an install.

    As for why I took it apart, smoked clear shell swap. Now Im wondering if the black buttons off of the Joy Cons will fit in a Lite shell.
     

    Attached Files:

    Last edited by TreeFarm, Aug 1, 2020
    s2m, DBsss, hartleyshc and 7 others like this.
  6. Modificatorul

    Modificatorul GBAtemp Regular
    Member

    Joined:
    Oct 28, 2009
    Messages:
    250
    Country:
    Romania
  7. hartleyshc

    hartleyshc GBAtemp Fan
    Member

    Joined:
    Oct 2, 2008
    Messages:
    370
    Country:
    United States
    This is exactly how I modded my Switch Lite. It is perfectly safe to keep both shields off. It's great look. I briefly used the colored buttons that came with my shell, but they are such low quality it just doesn't feel the same. Plus it doesn't look the best with white buttons and might look better if black buttons come around.

    As for if joycon buttons will fit: sadly no, they aren't the same. There's colored ones floating around AliExpress, but they are just full colored sets. No grey, no black. I really want either super famicom themed or DMG themed. But as I said, those super famicom buttons really clash with the white, and have shaper edges than the stock buttons. Let's hope some special editions come out at some point so more buttons can be bought. [​IMG][​IMG]

    Sent from my ONEPLUS A6013 using Tapatalk
     
  8. Noypi808

    Noypi808 Newbie
    Newcomer

    Joined:
    Aug 2, 2020
    Messages:
    4
    Country:
    United States
    I need my switch lite modded by installer in USA.
     
    Deleted User likes this.
  9. TroyMcLure

    TroyMcLure Newbie
    Newcomer

    Joined:
    Jul 10, 2020
    Messages:
    6
    Country:
    Germany
    Ah, interesting...
     
  10. Deleted User

    Deleted User Newbie

    PM Sent.
     
  11. Deleted User

    Deleted User Newbie

    Little trick for those buttons that arent flush.

    Shave or sandpaper the rough edges. Should be flush after wards

    — Posts automatically merged - Please don't double post! —

    For those wondering I focus mainly on the Tegra as far as paste is concerned. Arctic MX2. Thank You!
     
    Memoir likes this.
  12. iialaq01

    iialaq01 Advanced Member
    Newcomer

    Joined:
    May 25, 2020
    Messages:
    70
    Country:
    United States
    Can anyone send me a link for SX pro seller on AliExpress?
     
  13. Noypi808

    Noypi808 Newbie
    Newcomer

    Joined:
    Aug 2, 2020
    Messages:
    4
    Country:
    United States
    Got your PM. Thanks for the quick reply. I will be sending you my switch lite.
     
  14. hartleyshc

    hartleyshc GBAtemp Fan
    Member

    Joined:
    Oct 2, 2008
    Messages:
    370
    Country:
    United States
    Yeah they sit flush. It's the outer diameter of the button. They are a sharper corner from the side of the button to the top than the stock Nintendo buttons are more round. It's a hard corner. I'd probably use magic eraser or just the finest grit sandpaper to try and minimise the roughness caused by rounding them out.

    But on top of that, the sfc colored buttons just don't look as good with the white analog, dpad, +/-, and home/screenshot. I've only found one user who had black buttons, but they used cast resin and made them themselves. If you search for a white lite shell on YouTube you'll find them. There's a bunch of users on Etsy and Twitter that make custom buttons. But I'm not too much into that world that I know who would be able to make black or grey buttons for me.

    Sent from my ONEPLUS A6013 using Tapatalk
     
    Deleted User likes this.
  15. Deleted User

    Deleted User Newbie

    Yeah im taking about edges as well. Sand them down or use your nail LOL. Works for me.
     
    mike3041990 likes this.
  16. mike3041990

    mike3041990 Member
    Newcomer

    Joined:
    Aug 3, 2020
    Messages:
    17
    Country:
    United States
    Need a quote on an install for sx lite pm me please. Thanks.
     
    Deleted User likes this.
  17. matias3ds

    OP matias3ds GBAtemp Addict
    Member

    Joined:
    Oct 25, 2017
    Messages:
    2,822
    Country:
    Argentina
    There are clean installs and moderfucker Clean , thats a new Level , Amazing job and great pics
     
  18. mike3041990

    mike3041990 Member
    Newcomer

    Joined:
    Aug 3, 2020
    Messages:
    17
    Country:
    United States
    Also could someone pm a link to purchase sx lite.
     
    Deleted User likes this.
  19. Deleted User

    Deleted User Newbie

    PM Sent.
     
  20. mike3041990

    mike3041990 Member
    Newcomer

    Joined:
    Aug 3, 2020
    Messages:
    17
    Country:
    United States
    I think I may have to make a few more posts before I can receive messages.
     
    Deleted User likes this.
Draft saved Draft deleted
Loading...

Hide similar threads Similar threads with keywords - Received, Units,