by reading your hekate_ipl.bin, it seems you don't know what you are doing, and you're trying to test things...this is not how it works.
you should read Hekate/Atmosphère github, everything is explained.
you try to load Atmosphère by using the "fss0" method AND by chainloading fusee.bin
you can't do BOTH, you have to choose
your hekate_ipl.ini should be :
[config]
autoboot=1
autoboot_list=0
bootwait=3
backlight=100
autohosoff=0
autonogc=0
updater2p=0
bootprotect=0
[Atmosphere CFW]
icon=bootloader/res/icon_payload.bmp
fss0=atmosphere/package3
kip1patch=nosigchk
atmosphere=1
emummc_force_disable=1
[Warmboot Error Fix]
fss0=atmosphere/package3
stock=1
emummc_force_disable=1
icon=bootloader/res/icon_switch.bmp
in order to launch/install games, you only need 3 pieces, there's nothing hard :
Atmosphère 1.2.4
Hekate 5.6.5 + Nyx 1.1.1
iTotalJustice's sigpatches for Atmosphère 1.2.4
and sx gear of course (better : reflash your SX chip with
spacecraft-nx firmware)
- unzip everything on the root of a FAT32 formatted microSD card
- add/edit bootloader\hekate_ipl.ini ↑
- copy config_templates\stratosphere.ini to the config\ folder, edit the ini and add nogc=0
- then,
- if SX chip not reflashed, edit boot.ini, put file=hekate_ctcaer_5.6.5.bin, you're done
- if SX chip reflashed with spacecraft-nx : rename hekate_ctcaer_5.6.5.bin to payload.bin, you're done
If you follow this, Atmosphère MUST start and work without ANY problems.
Finally, put DBI, launch it, run MTP (press X), connect with an USB cable, copy your games to "microSD Install" or "NAND Install" in order to INSTALL games
directly
this MUST work. This is exactly my setup, the setup of thousand happy people.
I'm using it on :
- my Switch Lite with an SX Lite chip (converted with spacecraft-nx firmware)
- my day one V1 Switch with an RCMLoader dongle
- my other day one V1 Switch with a trinket m0
- my Quest/Kiosk V1 Switch with a trinket m0