Hacking SWITCH NOOB PARADISE - Ask questions here

[Draxzelex]

I updated my switch and I can no longer hold R to access the other mode when I press album. How can I get out of applet mode?​

You hold R over a game, not the album. The album is an applet so even if you hold R when you press it, you will still be in applet mode. Games are not considered applets.

 

[impeeza]

I updated my switch and I can no longer hold R to access the other mode when I press album. How can I get out of applet mode?​

To exit any applet you press the home button, By default to enter to Homebrew Loader (ON APPLET MODE) you just run album WITHOUT touching any other key, to load Homebrew Loader in full memory access mode you press R while loading ANY TITLE and do not let go R until full load.

 

[Xfox1]

Hello!
I've got banned from Nintendo Online but was wondering if there is a way to play games online (e.g: Mario Kart) with some friends, considering we both run latest version of Atmosphere.

 

[impeeza]

Hello!
I've got banned from Nintendo Online but was wondering if there is a way to play games online (e.g: Mario Kart) with some friends, considering we both run latest version of Atmosphere.

Lanplay http://www.lan-play.com/

 

[Xfox1]

Lanplay http://www.lan-play.com/

Seems cool, thanks.
However their website is stuck in a loop.

 

[impeeza]

Seems cool, thanks.
However their website is stuck in a loop.

https://gbatemp.net/threads/lan-play-gui-a-graphical-interface-for-lan-play-updated-v1-3-0.525900

 

[That_Guy_Who]

Hi, I am trying to re size my nand by following this guide: . I'm using NXNandManager and once i configure the prod keys in NxNandManager from my switch, my device disappears and the program seems to be indefinitely showing 'scanning devices, please wait'. What's gone wrong?
I have NXNandManger v.5.2 for fIrmware 18.1.0 and both my Emummc and Sysmmc are on 18.1.0.
Thanks

 

[impeeza]

Hi, I am trying to re size my nand by following this guide: . I'm using NXNandManager and once i configure the prod keys in NxNandManager from my switch, my device disappears and the program seems to be indefinitely showing 'scanning devices, please wait'. What's gone wrong?
I have NXNandManger v.5.2 for fIrmware 18.1.0 and both my Emummc and Sysmmc are on 18.1.0.
ThanksView attachment 456842

Why do you want to do that?

 

[Ginjuccy]

Is dns blocking file and exosphere enough while in emummc cfw to stop a ban? Also which app can I use to dump my carts?

 

[impeeza]

Is dns blocking file and exosphere enough while in emummc cfw to stop a ban? Also which app can I use to dump my carts?

https://gbatemp.net/threads/nintendo-switch-banning-hub-warning.508710/

Post automatically merged: Sep 9, 2024

Also which app can I use to dump my carts?

NXDumpTool https://github.com/DarkMatterCore/nxdumptool/

Post automatically merged: Sep 9, 2024

Hi, I am trying to re size my nand by following this guide: . I'm using NXNandManager and once i configure the prod keys in NxNandManager from my switch, my device disappears and the program seems to be indefinitely showing 'scanning devices, please wait'. What's gone wrong?
I have NXNandManger v.5.2 for fIrmware 18.1.0 and both my Emummc and Sysmmc are on 18.1.0.
ThanksView attachment 456842

Why do you want to do that?

I think we are facing a X-Y problem, please let us to know What really are you trying to achieve, and what is the desired result.

 

[Adoken]

I have an original day 1 switch at firmware 10.0.1 (or around that) that i haven't used for ages... I think it has Custom Firmware on installed with the TeamXecuter Os from back then.
Is there any way i can update it to the latest and get everything set up with atmosphere? i havent even picked up this switch in ages... just charged it and saw the firmware...
Any guidance will be hugely apreciated as i am completely off and outdated on everything atm.

Thank you

 

[BigOnYa]

I have an original day 1 switch at firmware 10.0.1 (or around that) that i haven't used for ages... I think it has Custom Firmware on installed with the TeamXecuter Os from back then.
Is there any way i can update it to the latest and get everything set up with atmosphere? i havent even picked up this switch in ages... just charged it and saw the firmware...
Any guidance will be hugely apreciated as i am completely off and outdated on everything atm.

Thank you

https://www.sthetix.info/migrating-from-the-sx-os-to-atmosphere/

 

[Adoken]

https://www.sthetix.info/migrating-from-the-sx-os-to-atmosphere/

Cool thanks i'll have a look at that when i get back home

Thank you

Post automatically merged: Sep 10, 2024

https://www.sthetix.info/migrating-from-the-sx-os-to-atmosphere/

Ok so i downloaded latest hekate and amosphere, copied them to sd root, put fusee file in the bootloader payloads folder.

I boot into rcm and inject the hekate file and i boot to atmos logo and then error as fatal error occurred when running atmosphere.
program ID: 10041544d530000
Error Desc: std::abort() called (0xffe)

report sent to bin file and press power and it loops back... sxos was on emunand, should i just clean SD card, update console to latest firm and then do the whole process?

i am lost here tbh

EDIT: Just factory reset and did a clean install atmosphere up and running on EMUNand, thanks

 

[switchfan161]

• Hey people,

i am in the actual fw and atms Firmware. I installed the actual sigpatches a month ago. Unfortunately the game "thank goodness you're here" won't run. It always tries to connect with the Internet. Has anybody an idea? Are newer sigpatched needed?

Unfortunately even with this sig patches it won't launch. I tried installing different updates for the game but none of em worked. Btw the sigpatches sys-patch you mentioned are really good, other games which won't launch before work again
And another problem. I tried to play emio, i used nspsplitty but awwooo installer isn't showing me the both split files, so i can't even install it. Does anybody have an idea how to play and install this both games?

 

[impeeza]

• Hey people,

i am in the actual fw and atms Firmware. I installed the actual sigpatches a month ago. Unfortunately the game "thank goodness you're here" won't run. It always tries to connect with the Internet. Has anybody an idea? Are newer sigpatched needed?

Unfortunately even with this sig patches it won't launch. I tried installing different updates for the game but none of em worked. Btw the sigpatches sys-patch you mentioned are really good, other games which won't launch before work again
And another problem. I tried to play emio, i used nspsplitty but awwooo installer isn't showing me the both split files, so i can't even install it. Does anybody have an idea how to play and install this both games?

read the sigpatches THREAD and install sys-patch sysmodule :

https://gbatemp.net/download/sys-patch-1-5-2-binary-fw-18-1-0-atmosphere-1-7-1.38686/

 

[switchfan161]

read the sigpatches THREAD and install sys-patch sysmodule :

https://gbatemp.net/download/sys-patch-1-5-2-binary-fw-18-1-0-atmosphere-1-7-1.38686/

I installed them. Still doesn't launch.
And how about the "emio-problem"?

 

[impeeza]

I installed them. Still doesn't launch.
And how about the "emio-problem"?

and restarted your console?

Post automatically merged: Sep 12, 2024

tried to play emio,

DO NOT SPLIT FILES, use DBI and MTP to install files on your console, YOU DON'T NEED TO COPY THE FILES TO CONSOLE TO INSTALL THEM.

Seriously stop looking in to youtube videos they are outdated.

 

[switchfan161]

and restarted your console?

Post automatically merged: Sep 12, 2024

DO NOT SPLIT FILES, use DBI and MTP to install files on your console, YOU DON'T NEED TO COPY THE FILES TO CONSOLE TO INSTALL THEM.

Seriously stop looking in to youtube videos they are outdated.

and restarted your console?

Post automatically merged: Sep 12, 2024

DO NOT SPLIT FILES, use DBI and MTP to install files on your console, YOU DON'T NEED TO COPY THE FILES TO CONSOLE TO INSTALL THEM.

Seriously stop looking in to youtube videos they are outdated.i restarted the cosole. I needed to restart it to insert micro SD.

and restarted your console?

Post automatically merged: Sep 12, 2024

DO NOT SPLIT FILES, use DBI and MTP to install files on your console, YOU DON'T NEED TO COPY THE FILES TO CONSOLE TO INSTALL THEM.

Seriously stop looking in to youtube videos they are outdated.

Yes, i needed to restart the switch because of the change of the micro SD.

I will try DBI now, thanks!

 

[Blythe93]

@switchfan161 : Get familiar with the latest English release of the DBI (658) before you switch to the latest Russian-only release (696). Latest English one will probably work as well but, just in case it doesn't, give the latest Russian-only release a try. Here's a good video tutorial by sthetix on how to use DBI (not up-to-date, but should do the trick).

 

[benone]

Hello!
Thanks for having a thread for newbies.

I have a situation with my unpatched Nintendo Switch running on official firmware. After an update, my system can only boot the Nintendo Logo and then this is the black screen - more info here : https://gbatemp.net/threads/cant-boot-anymore-after-updating-official-firmware.660578/#post-10490613 - .

Knowing the console is at this current state, is it realistic and feasible to start considering using a custom firmware?
I've seen a link to this guide - https://switch.hacks.guide/ , is it still recommended ?
I am looking for buying a RCM jig...

That's my situation.
Wishing you a great day, evening.