I've been researching lately with the EUR's, my Flashcards it's a R4 SDHC (Clone) and I use a 4GB Kingston MicroSD
Fixes just doesn't work, TTMENU, Ysmenu, Wood 1.26, none of them, but I ended up finding a solution, it's a bit complicated, but it worked on my R4 with the SPA Version (You'll probably end up noticing some mistakes between my words, I'm Chilean):
Download this Pack: The Pack
It contains the Desmume Emulator, the Poketemp Save editor for B&W and the Wood last firmware for clones
So, let's get started:
1. Emulate your Pokemon on Desmume
1,5. TKLF Pointed out .dsv may be a bit hard to find, so:
1. Open Desmume. Go to Config > Path Settings
2. Change all of the paths to one of your own folders (From C:\Users\ghoxt\Downloads\ds\PB\desmume-0.9.6-win32\ to your own folder)
>(e.g. C:\Documents and Settings\TKLF\My Documents\)
3. Close Desmume.
4. Re-open Desmume and load the ROM, following the posts's main instructions.
5. Upon saving, you should find the dsv in the correct folder.
2. Save when you're in front of the table with the three Pokemons
3. Copy the .dsv Save
4. Open it with the Poketemp Save Editor
5. Save as .sav
6. Rename savefile as your game, example:
Backup: Pkmnwhite.nds
Sav: asd.sav
Rename:
Sav: Pkmnwhite.sav
if you have troubles later, rename also as:
Pkmnwhite.nds.sav
7. Copy them to your Micro SD
8. Open the Wood Clones Firmware and copy the following to your card Root:
__rpg folder
waio.nds file
and your Flashcard model Wood correct version, in my case it was R4 SDHC, so woodr4sdhc.nds
9. Insert Card on your DS, Turn it on and load Wood, not Waio
10. When you find your Pokemon, press Y twice, this will open the options
11. Select savefile weight to 64 MB
12. Save changes and load game
13. Bingo!
Common Problems:
If your games doesn't load at first, try this:
Steps 1. to 10.
Choose unknow/auto at save file weight
Load game, Screen will freeze white
Turn off and on and load Wood again
Change savefile to 64 MB
Done!
If this doesn't work, check step 6 extra tip
===
===
Testers are required, if you own any of the Following Flashcards, please test this method:
Acekard 2i
Acekard RPG Mod
R4
R4 SDHC
R4 LS
R4i LS
M3
EX4
Test List will be updated if people helps
Fixes just doesn't work, TTMENU, Ysmenu, Wood 1.26, none of them, but I ended up finding a solution, it's a bit complicated, but it worked on my R4 with the SPA Version (You'll probably end up noticing some mistakes between my words, I'm Chilean):
Download this Pack: The Pack
It contains the Desmume Emulator, the Poketemp Save editor for B&W and the Wood last firmware for clones
So, let's get started:
1. Emulate your Pokemon on Desmume
1,5. TKLF Pointed out .dsv may be a bit hard to find, so:
1. Open Desmume. Go to Config > Path Settings
2. Change all of the paths to one of your own folders (From C:\Users\ghoxt\Downloads\ds\PB\desmume-0.9.6-win32\ to your own folder)
>(e.g. C:\Documents and Settings\TKLF\My Documents\)
3. Close Desmume.
4. Re-open Desmume and load the ROM, following the posts's main instructions.
5. Upon saving, you should find the dsv in the correct folder.
2. Save when you're in front of the table with the three Pokemons
3. Copy the .dsv Save
4. Open it with the Poketemp Save Editor
5. Save as .sav
6. Rename savefile as your game, example:
Backup: Pkmnwhite.nds
Sav: asd.sav
Rename:
Sav: Pkmnwhite.sav
if you have troubles later, rename also as:
Pkmnwhite.nds.sav
7. Copy them to your Micro SD
8. Open the Wood Clones Firmware and copy the following to your card Root:
__rpg folder
waio.nds file
and your Flashcard model Wood correct version, in my case it was R4 SDHC, so woodr4sdhc.nds
9. Insert Card on your DS, Turn it on and load Wood, not Waio
10. When you find your Pokemon, press Y twice, this will open the options
11. Select savefile weight to 64 MB
12. Save changes and load game
13. Bingo!
Common Problems:
If your games doesn't load at first, try this:
Steps 1. to 10.
Choose unknow/auto at save file weight
Load game, Screen will freeze white
Turn off and on and load Wood again
Change savefile to 64 MB
Done!
If this doesn't work, check step 6 extra tip
===
===
Testers are required, if you own any of the Following Flashcards, please test this method:
Acekard 2i
Acekard RPG Mod
R4
R4 SDHC
R4 LS
R4i LS
M3
EX4
Test List will be updated if people helps
Works On said:R4 SDHC Clone
R4 III Clone
QUOTE(Doesn't Works On)Supercard SD