Hacking So i should disable autorcm and use non-exfat when use ChoiDujourNX prevent brick right?

[ccfman2004]

If you wind up starting over use Hekate to format the SD card as it will optimize it for the best performance. Before that use it to see if the format of the card. I'm willing to bet it's exFAT. Also always backup emuNAND before doing any major system file changes like system updates. Just in case.

 

[Basketto]

Just to be clear, Auto-rcm won’t make a difference. You technically brick your switch just by having it enabled, but updates remove it automatically anyway.

 

[sh2dc]

Just to be clear, Auto-rcm won’t make a difference. You technically brick your switch just by having it enabled, but updates remove it automatically anyway.

i never use autorcm

i use loader + jig everytime boot console


when today i do update i 100% sure uncheck the enable autorcm
on ChoiDujourNX

i check fat32 option

not exfat

 

[ccfman2004]

If your SD card is exFAT formatted you will have the same issue as before. Please verify the format of the SD first before you do anything using Hekate.

 

[sh2dc]

If your SD card is exFAT formatted you will have the same issue as before. Please verify the format of the SD first before you do anything using Hekate.

yes i will do update

 

[ccfman2004]

Choosing no exFAT in ChoiDujourNX does not change the format of the SD card. If you don't verify the format of the SD card you will have the exact same problem as before if it is formatted as exFAT. Before you do ANYTHING please use Hekate to check the SD info and post a picture of the info please.

 

[sh2dc]

Choosing no exFAT in ChoiDujourNX does not change the format of the SD card. If you don't verify the format of the SD card you will have the exact same problem as before if it is formatted as exFAT. Before you do ANYTHING please use Hekate to check the SD info and post a picture of the info please.

thanks man

i will do it later

today is a busy hell day

few hours i guess

 

[ccfman2004]

Something changed in SX OS a while ago that broke exFAT support. Anytime I tried to boot SX OS using an exFAT formatted SD card I was greeted to a black screen after the Nintendo logo.

 

[sh2dc]

Something changed in SX OS a while ago that broke exFAT support. Anytime I tried to boot SX OS using an exFAT formatted SD card I was greeted to a black screen after the Nintendo logo.

wow i can not even .......


damn this is bad or sx os user then.....

--------------------- MERGED ---------------------------

Something changed in SX OS a while ago that broke exFAT support. Anytime I tried to boot SX OS using an exFAT formatted SD card I was greeted to a black screen after the Nintendo logo.

china write me into many hollywood movie

if you search twitter "china hollywood"

theres too many people already knew these fact about western entertainment industry control by china

the video game industry soon will be control by china too

china can ruin western entertainment culture...

i got some big mind - blowing story can blow out to media news etc....

but first i will slove the switch issues

 

[sh2dc]

Choosing no exFAT in ChoiDujourNX does not change the format of the SD card. If you don't verify the format of the SD card you will have the exact same problem as before if it is formatted as exFAT. Before you do ANYTHING please use Hekate to check the SD info and post a picture of the info please.

sorry for late reply

i have back up clean emunand on 3 sd cards

how i replace them to switch sd card emunand?!

==========

 

[sh2dc]

the backup and emunand folder is 100% same boot0 boot1 bin file etc...

their md5 not match

backup folder seems just clean system nand backup

emunand folder is emunand clean back up

both boot0 md5 not match

full.00.bin not match

however both full.07.bin md5 match

how i replace switch brick emu nand with these file?!

 

[spotanjo3]

You shouldn't use exFAT at all (even for normal use) as it's been known to become corrupt. I've had numerous issue with exFAT and since using FAT32 I've never had another file system issue. With exFAT, I would have issues loading the CFW periodically.

True but I never ever had a problem with exFat for over 2. years before I decided to switch to FAT32. Depends on people's doing. If they don't know what they are doing then sure it would corrupt. I never had a problem with it anyway. I go ahead with FAT32 for the reason. Again, never had a corrupt for over 2 years.

 

[sh2dc]

my mistake the backup folder = clean emunand back up file?!
so i just replace them to emunand folder?!


then where is my system nand back up.......

 

[ccfman2004]

True but I never ever had a problem with exFat for over 2. years before I decided to switch to FAT32. Depends on people's doing. If they don't know what they are doing then sure it would corrupt. I never had a problem with it anyway. I go ahead with FAT32 for the reason. Again, never had a corrupt for over 2 years.

I could never get SX OS to work on exFAT after some update to it.

 

[LeyendaV]

hi there

so i use tx pro with 10.1.0

i never use autorcm

just loader + jig boot cfw everytime

im use fat32


since i dont use autorcm

if i do update

i can just disable autorcm and use non-exfat when use ChoiDujourNX prevent brick right?

also i use type-c usb 100gb to do the update ( i put both ChoiDujourNX and update file on usb root )
will it work?
i try best dont use/ touch switch sd card

is there anything i forgot or miss something must do ?


i understabd when try update i must use cfw do it.

Use Daybreak

 

[sh2dc]

fixed replace full.00.bin

--------------------- MERGED ---------------------------

I could never get SX OS to work on exFAT after some update to it.

sd card was exfat

i got wrong information about back up file max 4gb is fat32


the back up file seems always 4gb max no matter exfat or fat32

--------------------- MERGED ---------------------------

super easy no matter how you brick console it will fix in 10 mins

just copy pasted back up file to correct one

 

[ccfman2004]

I had a strong feeling it was exFAT based on your issue. I know Hekate will do 2GB backup parts for FAT32 and 1 part for exFAT.

 

[sh2dc]

I had a strong feeling it was exFAT based on your issue. I know Hekate will do 2GB backup parts for FAT32 and 1 part for exFAT.

now all the savedata and game installed cant be find in emunand...

any fix

i replaced full.00.bin only in sx os folder

im sure savedata and installed game is in nintendo folder not in sx os folder

--------------------- MERGED ---------------------------

I had a strong feeling it was exFAT based on your issue. I know Hekate will do 2GB backup parts for FAT32 and 1 part for exFAT.

6gb install game folder still exist

if i re-install all game again??

it overwrite these 6gb folder?!

after that i get savedata back when launch game?!

because theres 30 folder some are 1 gb some are 100kb (save data)

 

[ccfman2004]

Generally when using emuNAND games get installed in a different folder so it doesn't conflict with sysNAND stuff. Also by replacing full.00.bin which was probably from a regular NAND back and as such has no data on any games installed after the backup as that info is stored in the System Partition of the NAND which is in the first file of the backup. Look for a folder named something like "Emunendo" in the root of the SD card.

Also by replacing that file you are probably on the older system software version now and not 10.2.0. I would highly recommend backing up all files on the SD card and using Hekate payload to format the SD as FAT32 to prevent the same issue again.

 

[sh2dc]

Generally when using emuNAND games get installed in a different folder so it doesn't conflict with sysNAND stuff. Also by replacing full.00.bin which was probably from a regular NAND back and as such has no data on any games installed after the backup as that info is stored in the System Partition of the NAND which is in the first file of the backup. Look for a folder named something like "Emunendo" in the root of the SD card.

Yes!!!!
Emunendo not nintendo my mistake


i find 30 folder under emunendo "fbggx353256" "gdtnhu355fv3" etc etc....

so i just reinstall game via usb make them "appear" to home screen again?

or theres some way make them "appear" instant in home screen...

savedata is there too 50-200 kb each folder

--------------------- MERGED ---------------------------

10.2.0 update success no issues