Hi All, Followed the Sneek install guide within the Complete Softmod guide here: http://sites.google.com/site/completesg/how-to-use/sneek I completed ALL the required operations, but just get a blank screen, and TV says 'No Input' when I launch bootmi from either Priiloader, or HBC. System is 4.2E, with Composite Cables, Priiloader V0.4 release, Custom IOS 202/223/224/249/250, and bootmii as IOS only. Have set bootmii config file to PAL-50 I did copy all the relevant files + NAND extracted files to my HBC Card, which has sorts of other sh!t on it. The NAND copy I used for extraction was from my 'almost' Virgin Wii with only bootmii and hbc 0.6 installed. No priiloader, no cios, etc. I left it at the blank screen for 2 or 3 minutes, nothing? The one thing i can think of is that the 1st step after entering the '42' in the window, was it took only seconds for the dos box to come up, and guide says Quote "6. Just wait a couple minutes for the program to do its thing. When it's finished when the screen looks like this." Any ideas ?? thx.