Hacking Smallest Trinket M0 External with Native USB/CR2032

[xeswitched]

Tutorial on how to make an External Payload Launcher:

External:

External Photos:
https://imgur.com/a/7s6ZSW0

Internal:

Enjoy

 

[salami68]

Where did you get that USB C plug that you soldered onto the old ports place?

 

[xeswitched]

Where did you get that USB C plug that you soldered onto the old ports place?

We had some swag that had some USB Micro to USB C adapters at my work. Alternately you can grab yourself, off amazon, ASIN B01I0ZAJXO. You will have to break it open but it should be the same exact part.

 

[Kubas_inko]

Where did you get that USB C plug that you soldered onto the old ports place?

I bought the same one from aliexpress.

 

[alimao]

possible installation diagram ?

 

[Kubas_inko]

possible installation diagram ?

D+ ----- D+
D- ----- D-
+ ----- +
- ----- -
That's about it.

 

[xeswitched]

D+ ----- D+
D- ----- D-
+ ----- +
- ----- -
That's about it.

Cute but its a little more complex for some

 

[xeswitched]

Updated OP to include Tutorial

 

[_gianno]

@xeswitched Is possible to remove the micro USB port without a hot air gun?

 

[mattytrog]

@xeswitched Is possible to remove the micro USB port without a hot air gun?

Possible, yes. Probable, no.

 

[_gianno]

Possible, yes. Probable, no.

Will this works?
I'm going to buy a hot air gun just for this and I don't want to spend a lot... Seems like there's two type of temperature: 350 °C and 550 °C

 

[mattytrog]

Will this works?
I'm going to buy a hot air gun just for this and I don't want to spend a lot... Seems like there's two type of temperature: 350 °C and 550 °C

Better off with a cheap rework station

 

[_gianno]

Better off with a cheap rework station

Can you point me for an amazon.it product?

 

[xeswitched]

Can you point me for an amazon.it product?

This should work;
https://www.amazon.it/obller-Saldat...F8&qid=1534865990&sr=8-4&keywords=hot+air+gun

 

[_gianno]

This should work;
https://www.amazon.it/obller-Saldat...F8&qid=1534865990&sr=8-4&keywords=hot+air+gun

Thanks a lot! Unfortunately is too much 45 euros for a one shot project. Thank for your help.

 

[xeswitched]

Thanks a lot! Unfortunately is too much 45 euros for a one shot project. Thank for your help.

I dont know the conversion rate off hand but a simple hot air gun will work just fine.