Hacking SD2Vita is not working on Henkaku 3.68

[ultimatepump]

Did you copy everything from ux0 to the SD before enabling the plugin?

I did. After ftping to my pc, just put the ux0 folder in the root of the sd2vita?

 

[phunky1]

Anyone able to get the official memory card to mount to uma0? I can get sd2vita working but can't get uma0 to mount memory card.

--------------------- MERGED ---------------------------

I did. After ftping to my pc, just put the ux0 folder in the root of the sd2vita?

No move to ur0

 

[ultimatepump]

Anyone able to get the official memory card to mount to uma0? I can get sd2vita working but can't get uma0 to mount memory card.

--------------------- MERGED ---------------------------

Ok, that I did not do. I left the ux0 where it was



No move to ur0

--------------------- MERGED ---------------------------



I'll report back asap

 

[WeedZ]

Step by step what I did

Installed hencore and vitashell on vita

On pc
Ran win32 disk imager and wrote the zzblank.img to the SD
Removed and reinserted SD, formatted to exfat and set allocation Unit Size to Default Allocation Size. Formatted.

Opened vitashell and ftp'd all of ux0 to the SD. Ftp'd gamesd.skprx to ur0:tai.

Added 'ur0:tai/gamesd.skprx' under *kernel in ur0:tai/config. Deleted ux0:tai/config

Put SD in adapter into vita, hit start on vitashell then reboot.

Ran hencore again and had 64gigs.

 

[phunky1]

Step by step what I did

Installed hencore and vitashell on vita

On pc
Ran win32 disk imager and wrote the zzblank.img to the SD
Removed and reinserted SD, formatted to exfat and set allocation Unit Size to Default Allocation Size. Formatted.

Opened vitashell and ftp'd all of ux0 to the SD. Ftp'd gamesd.skprx to ur0:tai.

Added 'ur0:tai/gamesd.skprx' under *kernel in ur0:tai/config. Deleted ux0:tai/config

Put SD in adapter into vita, hit start on vitashell then reboot.

Ran hencore again and had 64gigs.

But do you have your official memory card mounted also?

 

[ultimatepump]

I'm going to follow that verbatim


I have a Sony mem card inserted what should I do?

 

[WeedZ]

But do you have your official memory card mounted also?

No. Not once hencore is launched

 

[ultimatepump]

Can I just leave the Sony card out? So I do t have to pop it in and out all the time?

 

[phunky1]

Ok I found my issue, I am using storagemgr.skprx, this will allow you to mount SD card and official memory card. I copied an old version over. Now working as before.

https://github.com/CelesteBlue-dev/PSVita-StorageMgr/releases

 

[WeedZ]

Can I just leave the Sony card out? So I do t have to pop it in and out all the time?

Why would you need to take it out?

 

[ultimatepump]

Why would you need to take it out?

I don't know... Just want to eliminate any potential problems

 

[WeedZ]

I don't know... Just want to eliminate any potential problems

You shouldn't have to remove it at all

 

[paulzheng]

gamecard-microsd v1.3 is support 3.68henkaku

 

[wooterwan]

I did. After ftping to my pc, just put the ux0 folder in the root of the sd2vita?

You have to put the contents of the ux0 folder in the root of your sd card. it has to look like this in the root of your sd card

 

[pillemats]

Then sd2vita will work ? Only put files from ux0 to sd?

 

[pillemats]

I try that but it don’t work ! Only my original vita card will shown in vitashell

 

[Dave_Chad]

This is very simple.

Write zzblank.img to sdcard.
Format micro SD as exfat.
Delete ux0:tai folder.
Plug Vita to pc and SD card too.
Make sure windows setting shows hidden files.
Copy full Vita ux0 contents to micro sdcard root.
Copy games.skprx to ur0:tai.
Edit ur0:tai/config.txt with Vita shell and add the line below #KERNEL "ur0:tai/games.skprx" without quotation marks.

Stick SD card in adapter and boot Vita with it in. Run h-encore. Check free space with Vita shell it will be the SD card.

DO NOT ADD THE LINE TO THE TAI CONFIG USING NOTEPAD AS IT WILL NOT WORK. USE VITA SHELL ACTUALLY ON THE VITA.

Sent from my HTC U11 using Tapatalk

Just realised I mostly said what has already been said. Oops.

 

[pillemats]

thanks.

where i can get the zzblank.img ?

 

[pillemats]

i had tried that.

after the last step and rebooting i cant start vitashell.... file is damaged.....

 

[ultimatepump]

You shouldn't have to remove it at all

it works!

i like an idiot just put the ux0 folder in the root of the sd instead of the contents. duh. working thanks to you!