Replacing battery in EZF V 3in1 GBA sized

Discussion in 'GBA - Flashing Hardware and Software' started by silent sniper, Apr 23, 2008.

Apr 23, 2008
  1. silent sniper
    OP

    Member silent sniper !dennaB

    Joined:
    Jan 3, 2008
    Messages:
    1,392
    Location:
    Vancouver, Canada
    Country:
    Canada
    I'm wondering how to replace the battery and what battery (brand, voltage etc) i should use to replace it.

    I opened it up and it seems that the plates keeping the battery in place are glued on, this is different from my old lite sized one which seemed to use some kind of black adhesive tape.

    heres some pics (sorry for bad quality, i used a camera phone):
    [​IMG]
    [​IMG]
    [​IMG]

    so.... how am i supposed to get these plates off the battery, and also how am i supposed to reattach them?
    I want to be careful, becuase it looks like the plates are only attached to the circuitry by a thin piece of metal soldered on.
     
  2. Jack-Of-Trades

    Member Jack-Of-Trades GBAtemp Fan

    Joined:
    Apr 21, 2008
    Messages:
    311
    Country:
    United States
    The battery you Need is a Panasonic VL2020 2 Pin Battery
    Voltage 3.000 V [Typ]
    Charge Current 1.5 mA [Max]
    Charge Voltage 3.4 V [Nom]
    And to replace it you have to solder the new one on to the motherboard/chip (you don't remove the bridge's)

    99% sure this will work
    [​IMG]
    Link to Battery
     
  3. ben_r_

    Member ben_r_ GBAtemp Regular

    Joined:
    Sep 30, 2007
    Messages:
    228
    Location:
    California
    Country:
    United States
    Wow, how old is your 3in1 that you need to replace the battery?
     
  4. Jack-Of-Trades

    Member Jack-Of-Trades GBAtemp Fan

    Joined:
    Apr 21, 2008
    Messages:
    311
    Country:
    United States
    I doubt his battery is already dead he is just taking precaution's since all battery's eventually die even lith ion battery's that have a 1000 charge life
     

Share This Page