Hacking [Release] rxTools - Roxas75 3DS Toolkit [fw 2.0 - 9.2]

[DjoeN]

That was always a thing, its not exclusive to this release of rxtools

Ah héhé, well i never tried it before, was just messing around with devmode
Anyway thanks for clearing that one up

 

[EmceeKerser]

Ah héhé, well i never tried it before, was just messing around with devmode
Anyway thanks for clearing that one up

Haha no worries dude.
I really need this MSET o3ds 9.2 stuff cleared up, is it possible for 9.2? What cia do I need?

 

[jmmc]

@Roxas75 I have downgraded the MSET, and I don't know why and what i have done bad, but now, in emunand, I don't have Settings App.

Can anyone tell me the id of the settings app to reinstall it via FBI?

 

[forcefield]

FBI uses the 5.x SDK setup, if you are on 4.x sysNAND it won't launch.

Its not just FBI, GBA/DSiWare & other unsigned stuff did not work on 4.5 sysnand using your DevMode.
Anyway everything works from 9.2 sysnand. And with your work on MSET downgrading i'm sure 9.2 sysnand will soon be as good as having 4.5.
Good luck and thanks for everything!

 

[srwgin]

@Roxas75 I have downgraded the MSET, and I don't know why and what i have done bad, but now, in emunand, I don't have Settings App.

Can anyone tell me the id of the settings app to reinstall it via FBI?

first you should know your emunand ver
for ex 9.8.0-25USA then check http://yls8.mtheall.com/ninupdates/titlelist.php?sys=ctr&reg=E
find system settings title 0004001000021000 the last is v9221
then use 3DNUS.exe download it and made cia
then use any cia installer install it to emunand you should delete old before install

 

[EmceeKerser]

first you should know your emunand ver
for ex 9.8.0-25USA then check http://yls8.mtheall.com/ninupdates/titlelist.php?sys=ctr&reg=E
find system settings title 0004001000021000 the last is v9221
then use 3DNUS.exe download it and made cia
then use any cia installer install it to emunand you should delete old before install

so do you install v9221? Or an earlier version? I thought you were supposed to install the 4.5 version

 

[DjoeN]

@Roxas75 I have downgraded the MSET, and I don't know why and what i have done bad, but now, in emunand, I don't have Settings App.

Can anyone tell me the id of the settings app to reinstall it via FBI?

first you should know your emunand ver
for ex 9.8.0-25USA then check http://yls8.mtheall.com/ninupdates/titlelist.php?sys=ctr&reg=E
find system settings title 0004001000021000 the last is v9221
then use 3DNUS.exe download it and made cia
then use any cia installer install it to emunand you should delete old before install

For Europe:

0004001000022000 EUR System Settings v1027, v2061, v3075, v4097, v5127, v6157, v7174, v8202, v9220 2.0.0-2 Initial scan, 3.0.0-5, 4.0.0-7, 5.0.0-11, 6.0.0-11, 7.0.0-13, 7.2.0-17, 9.0.0-20 (stage3), 9.6.0-24

 

[srwgin]

so do you install v9221? Or an earlier version? I thought you were supposed to install the 4.5 version

in emunand I think use the last one becase you can use your NNID then go to eshop download patch or buy DLC XD
I think install 4.0ver in sysnand waiting rxtools support 4.x+sysnand with mset

 

[Roxas75]

To every user, pay attention to my posts before operating much with NANDs.
With 2.5, the operazions between sysnand and emunand were bugged, now with the latest builds of rxTools.dat (That you find in the OP) it is fixed.

Also, i updated the Ninjhax support, download the new rxtools.3dsx here, and test it!

 

[EmceeKerser]

in emunand I think use the last one because you can use your NNID then go to eshop download patch or buy DLC XD

So just to be clear

You download the latest title
Place it in a folder (not sure where)
run the downgrader
and now I can boot rxtools via MSET?

Im confused, wouldnt installing the 9.6 title on 9.2 not make MSET exploitable at all? Shouldnt I dl the version that corresponds with 4.5?

To every user, pay attention to my posts before operating much with NANDs.
With 2.5, the operazions between sysnand and emunand were bugged, now with the latest builds of rxTools.dat (That you find in the OP) it is fixed.

Also, i updated the Ninjhax support, download the new rxtools.3dsx here, and test it!

Ninjhax Rxtools access works for me, o3DS 9.2E

 

[jmmc]

first you should know your emunand ver
for ex 9.8.0-25USA then check http://yls8.mtheall.com/ninupdates/titlelist.php?sys=ctr&reg=E
find system settings title 0004001000021000 the last is v9221
then use 3DNUS.exe download it and made cia
then use any cia installer install it to emunand you should delete old before install

I have the latest from Europe. I can't check it, I haven't System Settings App xD

For Europe:

0004001000022000 EUR System Settings v1027, v2061, v3075, v4097, v5127, v6157, v7174, v8202, v9220 2.0.0-2 Initial scan, 3.0.0-5, 4.0.0-7, 5.0.0-11, 6.0.0-11, 7.0.0-13, 7.2.0-17, 9.0.0-20 (stage3), 9.6.0-24

Ok, thanks you, I will install the latest.

 

[srwgin]

So just to be clear

You download the latest title
Place it in a folder (not sure where)
run the downgrader
and now I can boot rxtools via MSET?

Im confused, wouldnt installing the 9.6 title on 9.2 not make MSET exploitable at all? Shouldnt I dl the version that corresponds with 4.5?

NO. jmmc lost setting in emunand I just tell he how to resotre
------
I also think if I delete setting title in SYSNAND 8.10J the replace with 4.X one
MSET exploit should work
but I try it yestoday and fail
after install old one I use code.bin and http://dukesrg.no-ip.org/3ds/rop/?LoadCode4.dat&code.bin
but it not work
------
maybe MSET exploit not work on 4.5+sysnand now
we can only use web to loading rxtools

 

[EmceeKerser]

NO. jmmc lost setting in emunand I just tell he how to resotre
------
I also think if I delete setting title in SYSNAND 8.10J the replace with 4.X one
MSET exploit should work
but I try it yestoday and fail
after install old one I use code.bin and http://dukesrg.no-ip.org/3ds/rop/?LoadCode4.dat&code.bin
but it not work

Ahhhhhh, that makes way more sense haha
Yeah I have no clue what the downgrade pack for the exploit is, but since the ninjhax access point works, I guess I can use that instead. The web exploit is a huge pain in the ass because of having to clear history and cookies everytime

 

[kactusss]

Also, i updated the Ninjhax support, download the new rxtools.3dsx here, and test it!

Great thanks! Is this supposed to work on every firmware now ?

 

[Fatalanus]

woops Ninjhax!! I'll test it right now for 8.1.0-18E!

 

[srwgin]

Ahhhhhh, that makes way more sense haha
Yeah I have no clue what the downgrade pack for the exploit is, but since the ninjhax access point works, I guess I can use that instead. The web exploit is a huge pain in the ass because of having to clear history and cookies everytime

GW can let N3DS use MSET exploit
then I check the packect 2 cia files
mset_j.cia System Settings 0004001000020000 v3074(4.0.0-7) this one we can use 3DNUS download ourself it is the same I check cia MD5
bluecardfix.cia Nintendo DS Cart Whitelist 0004800F484E4841 this one not

 

[EmceeKerser]

GW can let N3DS use MSET exploit
then I check the packect 2 cia files
mset_j.cia System Settings 0004001000020000 v3074(4.0.0-7) this one we can use 3DNUS download ourself it is the same I check cia MD5
bluecardfix.cia Nintendo DS Cart Whitelist 0004800F484E4841 this one not

So its as easy as dling the 4.5 System settings for my region and overwriting the current settings?

 

[erstriker7]

i download the rxtools 2.5v , i launch the rxtools, but screen black always , then i download the rxtools 2.4 and again screen black . helppppp

 

[jmmc]

@Roxas75 rxTools is working now with Ninjhax on 9.2E, with the new 3dsx

 

[srwgin]

rxTools is working now with Ninjhax on 8.10-25J
finally I can not use webbrower but need ninjhax or sky3ds
I hoping we can not use either in future