Hacking [RELEASE] Pasta CFW without Cubic Ninja - MSET (4.x old3ds)

Kscripnic

Member
OP
Newcomer
Joined
May 26, 2015
Messages
14
Trophies
0
XP
57
Country
Brazil
Requirements

  • SD Card (preferably blank, if not make sure to take a full backup)
  • A PC with an SD card reader
  • A 4.5 or lower 3DS with mset already installed using Gateway's Installer file.
Software Download Links:
  1. Format your SD card. It should be completely blank. Make sure to take a backup if you were using it for something else.
  2. In the "SD Card" folder from Palantine's CFW, you will find files such as Launcher.dat. Copy all of these onto the SD Card.
  3. Now, copy the boot.bin from PBT-CFW. There should already be a boot.bin from Palantine's CFW - delete this one and make sure you are running PBT CFW.
  4. Put the SD into the 3DS. Start the system, and let it create software management information. Now power down the system, and put the SD back into your computer.
  5. Now, in your SD card, there should be a Nintendo 3DS folder. Open it, and open the folder inside that. There should be another, so open that too. You should see a exdata folder.
  6. Make a new folder (not inside the exdata folder, but in the same directory as it) called “dbs”. Go into the folder and make a blank text file, named “title.db” or “import.db”. Doesn’t matter which.
  7. Put the SD back into the 3DS.
  8. Now, navigate to Settings --> Other --> Profile. WHILE HOLDING THE L BUTTON, tap DS Profile. The screen should be a DARK blue on the top. As with regular CFW, the bottom screen should ideally flash white for a moment and then load the CFW. If it doesn't, hold power to reboot the system and repeat step 9. Make sure to hold L.
  9. Now, once you’ve gotten into PBT-CFW, you’ll need your 3DS’ IP Address. You can use the tool you downloaded earlier (the network scanner) to find the devices from Nintendo. Note the IP. (usually looks like 192.168.1.1xx).
  10. Copy the DevMenu CIA you downloaded earlier into the Palantine CFW folder with run.bat.
  11. Edit the run.bat file in the Palantine CFW folder. Replace the DevMenu_2x.cia part with the name of your CIA, and the IPTOMODIFY with your IP.
  12. Code:
    installcia IPTOMODIFY 1 DevMenu_2x.cia
  13. Code:
    installcia 192.168.1.155 1 DevMenu_2x.cia
  14. Now execute the run.bat by double clicking it. It should return a result code of 0. If it doesn't, repeat steps 5-14. If it fails to connect, make sure the IP is correct and the 3DS is connected to the internet.
  15. You should now have DevMenu installed onto the 3DS.
  16. Turn off and remove your SD card.
  17. Now, in your SD card,replace Launcher.dat by the Pasta CFW Launcher.dat
  18. Stick your SD card back to 3DS and navigate to Settings --> Other --> Profile. WHILE HOLDING THE L BUTTON, tap DS Profile(Dont always need to hold the L button,just on first time).
  19. If everythings works you will boot on to Pasta CFW without Cubic Ninja!
Only works on old3ds with firmware 4.x


I´m not owner!Tutorial by:Chaldron
 

Attachments

  • Launcher MSET Exploit - GW Blue - Pasta CFW.zip
    2.6 KB · Views: 8,295

Apache Thunder

I have cameras in your head!
Member
Joined
Oct 7, 2007
Messages
4,284
Trophies
2
Age
34
Location
Levelland, Texas
Website
www.mariopc.co.nr
XP
5,927
Country
United States
The 4.x MSET Launcher was a proof of concept release that lacks any menu or extra features. It's a stripped down version of PBT-CFW basically. The main difference is this one has a 90% or so boot success rate while PBT and Palantine have a 20% or less boot rate. This does not need it's own thread and could have been found by looking at the main PastaCFW thread.
 

Kscripnic

Member
OP
Newcomer
Joined
May 26, 2015
Messages
14
Trophies
0
XP
57
Country
Brazil
The 4.x MSET Launcher was a proof of concept release that lacks any menu or extra features. It's a stripped down version of PBT-CFW basically. The main difference is this one has a 90% or so boot success rate while PBT and Palantine have a 20% or less boot rate. This does not need it's own thread and could have been found by looking at the main PastaCFW thread.

It always boot for me;)
 

ShadowOne333

QVID PRO QVO
Developer
Joined
Jan 17, 2013
Messages
10,686
Trophies
1
XP
12,478
Country
Mexico
This makes me wonder...
What happens if you install a CIA game that requires >4.5 FW?
Mine is a downgraded o3DS in 4.2U.

Can it play just fine if it is downgraded?
 
  • Like
Reactions: Kscripnic

tehrzky

Well-Known Member
Newcomer
Joined
May 5, 2015
Messages
62
Trophies
0
Age
35
XP
269
Country
so it means i can remove palantine? then install this instead? can i update this to ver. 9? dont have a gateway and any other flashcart. tnx
 

Kscripnic

Member
OP
Newcomer
Joined
May 26, 2015
Messages
14
Trophies
0
XP
57
Country
Brazil
so it means i can remove palantine? then install this instead? can i update this to ver. 9? dont have a gateway and any other flashcart. tnx

yes remove Palantine and use this one,but you cant update and may need a DS flashcard to set up MSET(you can do it without any flashcard,but it is more difficult)
 

zoogie

playing around in the dsiware
Developer
Joined
Nov 30, 2014
Messages
8,289
Trophies
2
XP
13,099
Country
Micronesia, Federated States of
The 4.x MSET Launcher was a proof of concept release that lacks any menu or extra features. It's a stripped down version of PBT-CFW basically. The main difference is this one has a 90% or so boot success rate while PBT and Palantine have a 20% or less boot rate. This does not need it's own thread and could have been found by looking at the main PastaCFW thread.
There is no reason to bury this news in a 3000 post thread. Costello can afford a few extra kilobytes on his server.

I mean, if this thread's existence isn't justified, it will die off on it's own due to a lack of interest. No reason to try find some arbitrary reason for it to disappear.
 

Demifiend

The bored one
Member
Joined
Mar 20, 2015
Messages
497
Trophies
0
Age
23
XP
507
Country
May i ask, do i need the blue gateway card, or is it valid to use any flashcard, like a generic R43ds or something like that.
 
Joined
Mar 17, 2010
Messages
21,251
Trophies
3
Location
Space
XP
10,060
Country
Norway
The 4.x MSET Launcher was a proof of concept release that lacks any menu or extra features. It's a stripped down version of PBT-CFW basically. The main difference is this one has a 90% or so boot success rate while PBT and Palantine have a 20% or less boot rate. This does not need it's own thread and could have been found by looking at the main PastaCFW thread.

TRICK seems to have at least a 60% success rate (should be same as Palantine and PBT, not much changed besides a basic GUI) I installed it on my brother's 3DS before this came out and it worked on the first try nearly every time when I was setting it up, installing games etc. Then as soon as I tried to show him how to load the CFW it failed like 4 or 5 times in a row :P
 

Kscripnic

Member
OP
Newcomer
Joined
May 26, 2015
Messages
14
Trophies
0
XP
57
Country
Brazil
TRICK seems to have at least a 60% success rate (should be same as Palantine and PBT, not much changed besides a basic GUI) I installed it on my brother's 3DS before this came out and it worked on the first try nearly every time when I was setting it up, installing games etc. Then as soon as I tried to show him how to load the CFW it failed like 4 or 5 times in a row :P

I had it tested all day,and never fails to me...
 
General chit-chat
Help Users
    godreborn @ godreborn: apparently, the dsi is capable wpa.