r4i sdhc v2.20t UPGRADE BUTTOM MISSIBG?!?!

Discussion in 'R4 DS' started by DollyPlurtastic, Feb 8, 2012.

  1. DollyPlurtastic
    OP

    Newcomer DollyPlurtastic Member

    Joined:
    Feb 7, 2012
    Messages:
    28
    so im following everything on the website and i cant upgrade,...the upgrade button is missing......

    it says

    R4 Card V1.4.3 Dsi and 3.0.06 3DS Firmware Upgrade Steps:

    1: Copy the corresponding upgrade firmwares to micro sd card.
    2: Insert the R4 card with firmware into the console which is lower than the V1.4.3 version, then turn it on to enter the R4 upgrade interface:
    a> The display of "loading" interface shows the R4 card upgrade is in process, please don't cut off the power or take out the card.
    b> The prompt“V1.4.3 upgrade completed" will be shown on the lower left corner after the R4 card upgrade is done. Now you are allowed to cut off the power and take out the card. It takes about 10 seconds to finish the upgrade.
    c> Download the latest kernel to the successfully upgraded card, and use the card on the V1.4.3 NDSI to confirm it's a successful upgrade.


    IS the filmware and KErmal 2 diffferent files? because the website only has kernals and no filmware
     
  2. DollyPlurtastic
    OP

    Newcomer DollyPlurtastic Member

    Joined:
    Feb 7, 2012
    Messages:
    28
    the r4 sayd to upgrade please restore flash.r4i ..................

    everytime i add the flash.r4i then load it on the sd . when i turn on the DSI it DELETS the flash.r4i ..............then i put it back in the computer the file is missing . why does the DS keep DELETING THIS FILE!?
     

Share This Page