r-jtag nand problem

Discussion in 'Xbox 360 - Hacking & Homebrew' started by Lunaaar, Jan 12, 2019.

  1. Lunaaar
    OP

    Lunaaar Newbie

    Newcomer
    1
    Jan 12, 2019
    Sweden
    was doing r-jtag on my zephyr just to try if i could get it to work. But now i think i messed up.

    I did nand backup before i started r-jtag. was trying to get it to boot but remembered that i probbably should update to latest dash, and flashed nand with my backup and updated dash then wired r-jtag up again and wrote xell to the box and tried to get it to boot again after a while i remembered that forgot to do a backup of the nand after the dash update. Then i thought no problem just to flash my backup again and update dash again...then do a new backup... upload_2019-1-12_12-2-10.

    Now the box wont boot with retail nand backup. i get rrod "Bridged solder joint/Short GPU-> (H)ANA" and im 100% sure nothing is bridged.


    Now i think the problem is that i wrote the old dash nand to the box that had the latest dash update. Am i thinking right?

    what are my options now?
    can i update dash on my nand backup bin file or maybe extract files from tje backup file and use the important files to create a new nand file with latest dash update.
    can i still boot in to xell with my old dash backup? if i get r-jtag to work and if not i try rgh.
     
  2. brickmii82

    brickmii82 GBAtemp Maniac

    Member
    8
    Feb 21, 2015
    United States
    Which dash was it on and which one did you update to? If they're both relatively recent, I don't think the bootloader fuseset changed. However the LDV (Lock Down Value) fuseset burned for sure. The Xbox 360 CPU has eFuses in it. Iirc, you could use your original nand but update the LDV in advanced options in Jrunner by increasing the value by 1. Keep the original nand dump safe somewhere and make a copy to alter.
     
  3. Lunaaar
    OP

    Lunaaar Newbie

    Newcomer
    1
    Jan 12, 2019
    Sweden
    the old dash is very old... 12625 and updated to 17526. ldv in jrunner shows first row 9 and 8 in the second row.
    is it possible to get in to xell to get cpu key with the old backup?
     

    Attached Files:

    Last edited by Lunaaar, Jan 12, 2019
  4. brickmii82

    brickmii82 GBAtemp Maniac

    Member
    8
    Feb 21, 2015
    United States
    Yeah I'm willing to bet the bootloader changed so LDV isn't going to matter. I think your best bet is to just RGH it with RGH 1.0 if it'll take. Zephyrs don't always do well. You could check over at Realmodscene, as those guys are pretty good with this kind of thing. It might take a bit of time to get a response but they're way more knowledgeable than I am on rebuilding nands.
     
  5. Lunaaar
    OP

    Lunaaar Newbie

    Newcomer
    1
    Jan 12, 2019
    Sweden
    ok, thanks, will do that. wiring rgh right now.
     
  6. Lunaaar
    OP

    Lunaaar Newbie

    Newcomer
    1
    Jan 12, 2019
    Sweden
    will it be possible to get in to xell with old backup if i get rgh or r-jtag to work?
     
  7. DinohScene

    DinohScene Feed Dino to the Sharks

    Moderator
    22
    GBAtemp Patron
    DinohScene is a Patron of GBAtemp and is helping us stay independent!

    Our Patreon
    Oct 11, 2011
    Antarctica
    Восторг
    You'd have to match your LDV in the old backup.
    Zephyrs are notoriously hard to RGH, Xenons are next to impossible.

    In all honesty, both boards are shit and prone to RROD.
    I'd personally bin it and get a Falcon or better board.
     
Loading...