Hacking question for a friend of mine

[theking1987]

I have a question for a friend of mine.
He has his switch on vacation and he have the sx pro with autorcm installed.
But i dont know if he has taking out his micro sd card when the switch was on.
But he gets a black screen but nothing happend. He pushed the power button for 30 seconds.
He tried to start with the dongle and with the dongle and jig etc.
He have a macbook there so do someone knows what he can do?

 

[Kubas_inko]

His SX Pro can be faulty or discharged. So he needs to push the payload to the switch manually. Idk how to do that on mac tho (probably via python)

 

[DaveLister]

Dongle can be charged for 20 seconds in any usbc port that supports reverse charge like an s8. The autorcm being on sometimes with panicky button presses you get the sense of brick, this is total balls . Put the switch on charge for at a least an hour before trying again . The sd pro as I said needs 20 secs juice up . If auto rcm is installed after that hour pop it out stick in PRO and away you go with simple power on .

It's easy mistake with auto rcm leaving it in this mode will also not charge the pro dongle at boot. It will charge it once in ofw or cfw dashboards.

 

[aos10]

The switch could need some charge because when the switch on autoRCM it could be powered on the whole time, so the dongle can't get any power from it.

 

[TamarindoJuice]

Cool thread title.

 

[theking1987]

His switch is working again. It turns out that his switch was drained out of power juice. So he charged it with the dongle on his mac.

 

[DaveLister]

It happens with AutoRCM, you are not sure if its off, or not, little tap on the power button while in its case and boom it's flat as foook . It goes into deep charge mode and wont power on until battery is at a certain level - then everyone thinks Fuck Birck OH NO ! . Auto RCM for getting comfy - then disable after all reboots and things setup nice. Sleep mode and jig once in a while is much better than dead bat from auto RCM. at least if it powers on in transit it will sleep again from booting OFW.