[Q] Enso 3.65 doesn't want to load plugins from ur0:?

Discussion in 'PS Vita - Hacking & Homebrew' started by Roxie Mika, Mar 13, 2018.

  1. Roxie Mika
    OP

    Roxie Mika Huh? Who, me?

    Member
    3
    Mar 14, 2015
    United States
    Chicago, IL
    So, little backstory. I use an SD2Vita with my PSTV, I just updated to Enso'd 3.65. Naturally since I have an SD2Vita I want to put my plugins in ur0:, and putting them there indeed worked back on 3.60. However, now none of my plugins want to load or work from there. I downloaded the updated versions of download_enabler, NoNpDrm and gamesd, put them in ur0:tai, and added them to the config.txt there, making sure there was no ux0:tai/config.txt, of course. None of them loaded, as indicated by nothing I installed to my SD card loading, pkgi/pkgj being able to download titles but immediately failing to install them, and the browser still giving the "This file cannot be downloaded on this system" error when trying to download non-media files.
    Is there somewhere else I should be putting my plugins now? I saw a tai folder in vs0 that didn't used to be there, for instance. Though I'm sketchy on messing with the v*0 partitions...
    My ur0:tai/config.txt:
    Code:
    # This file is used as an alternative if ux0:tai/config.txt is not found.
    # For users plugins, you must refresh taiHEN from HENkaku Settings for
    # changes to take place.
    # For kernel plugins, you must reboot for changes to take place.
    *KERNEL
    ur0:tai/storagemgr.skprx
    ur0:tai/nonpdrm.skprx
    # henkaku.skprx is hard-coded to load and is not listed here
    *main
    # main is a special titleid for SceShell
    ur0:tai/henkaku.suprx
    ur0:tai/download_enabler.suprx
    *NPXS10015
    # this is for modifying the version string
    ur0:tai/henkaku.suprx
    *NPXS10016
    # this is for modifying the version string in settings widget
    ur0:tai/henkaku.suprx
     
  2. Dimensional

    Dimensional GBAtemp Advanced Fan

    Member
    4
    Dec 7, 2008
    United States
    Texas
    It does load the plugins. However storagemgr doesn't work properly on 3.65, despite the github repo claiming to have updated. I recommend sticking with Theflow's gamesd version, if possible.
     
  3. sj33

    sj33 GBAtemp Psycho!

    Member
    10
    Oct 22, 2013
    Japan
    OP states that they are using the updated versions of the plugins.

    Is the SD card itself detected in Vitashell? If so, the plugin is working.
     
  4. Roxie Mika
    OP

    Roxie Mika Huh? Who, me?

    Member
    3
    Mar 14, 2015
    United States
    Chicago, IL
    Someone uploaded a build of the updated version on here, and I decided to try it. That said, it didn't work with gamesd either.
    The SD card does not appear in any way. uma0 isn't there and ux0 is still the internal memory.
     
    Last edited by Roxie Mika, Mar 13, 2018
  5. Dimensional

    Dimensional GBAtemp Advanced Fan

    Member
    4
    Dec 7, 2008
    United States
    Texas
    If that build was made more than 7 hours ago, that's the build I attempted to try and it failed as well. Celeste recently uploaded new source but compiling and testing that also failed.
     
  6. Dimensional

    Dimensional GBAtemp Advanced Fan

    Member
    4
    Dec 7, 2008
    United States
    Texas
    You can tell if the plugin is working or not by checking ur0:tai for a log file, storagemgr_log.txt. If that files isn't there, then the plugin isn't loading.
     
  7. windhazard

    windhazard GBAtemp Fan

    Member
    3
    Mar 23, 2016
    Germany
    See if you still have config.txt in ux0:tai. Delete it if that's the case.
     
  8. Roxie Mika
    OP

    Roxie Mika Huh? Who, me?

    Member
    3
    Mar 14, 2015
    United States
    Chicago, IL
    [​IMG]
    No such file in ur0:tai. So... yeah. No plugins are loading.
    EDIT: Just tried moving all the plugins to ux0: and also tried using ArkSource's updated build of gamesd.skprx. Nothing. It's like the plugins aren't even there. This is bizarre...
     
    Last edited by Roxie Mika, Mar 18, 2018
  9. Kerbangman

    Kerbangman GBAtemp Fan

    Member
    2
    Sep 19, 2016
    I used "switch sd2vita" and now have sd card as ux0: and sony card as uma0:

    you should have a tai folder and config setup in ur0:
    If not you should do so.
    new tai config should point to gamessd etc to ur0:tai

    Copy the new updated files
    gamesd.skprx
    nonpdrm.skprx
    and others to ur0:tia/
    run switch sd2vita

    delete or rename tia config from ux0:tai/

    Should all work.
     
    Last edited by Kerbangman, Mar 13, 2018
  10. sj33

    sj33 GBAtemp Psycho!

    Member
    10
    Oct 22, 2013
    Japan
    Warning - using Switch SD2Vita sent my 3.65 Enso into a bootloop which I was only able to fix by restoring the system. It kept Enso and it’s all fine, but I advise against using it on 3.65.
     
  11. leonmagnus99

    leonmagnus99 GBAtemp Psycho!

    Member
    7
    Apr 2, 2013
    United States
    Seinegald
    push your config and the plugins files in the ux0/tai directory as well and note that most of the plugins will need to be updated for enso 3.65 to be compatible.
     
  12. Roxie Mika
    OP

    Roxie Mika Huh? Who, me?

    Member
    3
    Mar 14, 2015
    United States
    Chicago, IL
    As I already mentioned, I already did that. It didn't work. No plugins are loading. I'm only using 3.65-updated plugins, and I've tried adding them to ur0 and to ux0 to no avail. I might have to just reset the system settings. This is ridiculous... Thankfully I won't lose any saved data but still, jeez.
     
  13. leonmagnus99

    leonmagnus99 GBAtemp Psycho!

    Member
    7
    Apr 2, 2013
    United States
    Seinegald
    humm, is your config txt edited the correct way?
     
  14. Bu2d85

    Bu2d85 GBAtemp Advanced Fan

    Member
    4
    GBAtemp Patron
    Bu2d85 is a Patron of GBAtemp and is helping us stay independent!

    Our Patreon
    Nov 6, 2014
    United States
    Honestly I just kinda skimmed through the thread but did you delete the config file in ux0:tai?

    If the file is is there it will ignore the config file in ur0:tai.
     
    Last edited by Bu2d85, Mar 13, 2018
  15. Kerbangman

    Kerbangman GBAtemp Fan

    Member
    2
    Sep 19, 2016
    That happened to me before I used Switch SDvita.

    the loop is because you dont have tai setup correctly in location ur0:

    You probably deleted or renamed the tai in ux0:

    Once the switch sdvita sets up the sd to ux0: you have to rebuild.
     
    Last edited by Kerbangman, Mar 13, 2018
  16. Roxie Mika
    OP

    Roxie Mika Huh? Who, me?

    Member
    3
    Mar 14, 2015
    United States
    Chicago, IL
    Does it even count as skimming if you don't read the first post?

    Anyway, before I go and do something drastic, I'll try and start from a fresh config.txt. Maybe I just made a really stupid mistake and I'm just not seeing it right now.
     
  17. VashTS

    VashTS Beat it, son

    Member
    7
    GBAtemp Patron
    VashTS is a Patron of GBAtemp and is helping us stay independent!

    Our Patreon
    Mar 14, 2009
    United States
    Upstate NY
    There is updated sources for SD2Vita for 3.65 but it is not compiled :( I need that app too I honestly had no clue had to set up plugins on the Vita but I managed to at least get my vita2sd adapter working, now i just need to figure out how to get my vita mem card as uma0
     
  18. Dimensional

    Dimensional GBAtemp Advanced Fan

    Member
    4
    Dec 7, 2008
    United States
    Texas
    If the plugin was even remotely working, it would generate a log stating the config file was missing. However there is no log. The plugin is flat failing to load up entirely. Also tested this plugin and made sure the taihen config file is correct.
     
    Last edited by Dimensional, Mar 13, 2018
    Roxie Mika likes this.
  19. Kerbangman

    Kerbangman GBAtemp Fan

    Member
    2
    Sep 19, 2016
  20. SeongGino

    SeongGino Your Average Seong

    Member
    4
    May 20, 2015
    United States
    Jersey, Jersey
    I'm just going to leave this link out there to save anyone else the trouble: StorageMgr is a newer replacement for the stock SD2Vita plugin that supports all possible mount points (Official Sony MemCards, USB Mass Storage, 3G Vita PCI adapter, GameCard Slot, & Internal Storage), and has been updated recently to support 3.65.
    It is not officially compiled yet, but this build currently works as a hold-over until an official release. Make sure to drop both the plugin and the config file into ur0:tai, set the plugin underneath KERNEL, and adjust the mount points in the config file accordingly.
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice