Problems injecting FBI into Health&Safety

Discussion in '3DS - Flashcards & Custom Firmwares' started by Drake008, Jun 1, 2016.

  1. Drake008
    OP

    Drake008 Advanced Member

    Newcomer
    88
    16
    Feb 2, 2008
    Gambia, The
    When I try to dump the Health&Safety app with these instructions I get a fragmentation error.

    Then I tried this without any luck, too

    ----------------------------------
    Old method of installing a CIA installer. Download FBI.cia

    You need to use rxTools 2.5.2 or above for this method! You can get 2.5.2 from rxTools.net, or follow the instructions from the section "How to Update to a Newer rxTools Version" to get the latest Nightly.

    1. Boot up your 3DS and launch rxTools. Hold L when the bottom screen glitches to get into the menu. If you're using rxTools 2.5.2 or 2.6, hold R instead.

    2. If using 3.0, press dpad RIGHT to go to Advanced Options -> Press A -> Install FBI -> Press A -> choose SYSNAND, then select "check TMD version".
    If using 2.5.2 or 2.6, choose " Inject FBI over H&S app" and then choose "Install".
    3. Take note of the console region and the TMD version, and turn off your 3DS.

    4. Open the rxtools download and open the "Tools/fbi_injection/[region]/[version]" folder and copy the "fbi_inject.app" and "fbi_inject.tmd" files to the SD card root dir.

    5. Put the FBI.cia from the FBI download onto your sd card

    6. Boot up your 3DS and launch rxTools. Hold L (or R if using 2.5.2 or 2.6) when the bottom screen glitches to get into the menu.

    7. If using 3.0, press dpad RIGHT to go to Advanced Options -> Press A -> Install FBI -> Press A -> choose SYSNAND, then select "Install FBI". When it's done, it will ask what you want to do with the source. Select "keep" if you want to install FBI to sysnand later.
    If using 2.5.2 or 2.6, do the same as in step 2.
    8. Now, return to the rxtools main menu and select RXMODE -> SYSNAND and launch the Health & Safety Information app, it should boot FBI instead
    9. Select FBI.cia and press A to install it.

    If you get a Database error! In your SD card, there should be a Nintendo 3DS folder. Open it, and open the folder inside that (has a long name of random numbers and letters); that is your Sysnand's ID folder.

    If there are two or more ID folders, then do the following steps for both folders. One folder is for your Sysnand and the other is for your Emunand; if there is another similar folder, it probably belongs to another 3DS that you inserted your SD card into. Ignore the "private" folder if there is one.


    There should be another folder within, so open that too. You should now see an "extdata" folder. If you don't see a "dbs" folder as well, download this zip folder and put the "dbs" folder beside the extdata folder.
    ---------------------------------

    It just starts the normal Health&Safety menu.

    Can someone help me? I'am on 4.5.0-8E in Sysnand and in Gateway on 10.6.0-31E

    I'am trying to get down to 2.1
     
  2. Davidosky99

    Davidosky99 Eevee :3

    Banned
    2,582
    1,570
    Jun 7, 2015
    Porto
    Dont use a gateway to downgrade to 2.1 use instead an emunand in a real SD. Also don't use gw during the downgrade process for that matter, because IIRC things can go wrong when downgrading with it
     
  3. Drake008
    OP

    Drake008 Advanced Member

    Newcomer
    88
    16
    Feb 2, 2008
    Gambia, The
    I don't know what you mean by emunand on a real sd.
    I have an emunand installed with Gateway. The only thing I would like to have is this otp thing.

    And the two instructions won't give it to me.
     
  4. Davidosky99

    Davidosky99 Eevee :3

    Banned
    2,582
    1,570
    Jun 7, 2015
    Porto
    Follow plailects guide to the word and DO NOT use gateway during this process
     
  5. Drake008
    OP

    Drake008 Advanced Member

    Newcomer
    88
    16
    Feb 2, 2008
    Gambia, The
    I tried this and I get a fragmentation error.


    [​IMG]
     
    Last edited by Drake008, Jun 1, 2016
  6. Temptress Cerise

    Temptress Cerise Miss Magic~ <3

    Member
    2,201
    1,469
    May 1, 2016
    United States
    When Gateway makes an emuNAND, it isn't properly aligned. This is why you get fragmentation errors and other unexplained stuff.

    All your problems are probably due to using Gateway.
     
    Purge and astronautlevel like this.
  7. Drake008
    OP

    Drake008 Advanced Member

    Newcomer
    88
    16
    Feb 2, 2008
    Gambia, The
    So I cannot get up to 9.2 and then down to 2.1.0?
     
    Last edited by Drake008, Jun 1, 2016
  8. Just3DS

    Just3DS GBAtemp Fan

    Member
    440
    109
    Jan 31, 2015
    This is a rough explaination but get work done. Still let other members confirm this:

    Use emuNAND Tool to extract and save your current GW emuNAND from your console SD card to PC. Also backup Nintendo 3DS folder from SD card to PC.

    Either use a spare empty SD card or use MiniTool Partition Wizard to remove all hidden partitions and format your current SD card to FAT32.

    Follow the Phailect guide word to word on fresh SD card. This will give you A9LH on sysNAND.

    Once that is done you can use your extracted emuNAND.bin by putting it on console SD card and use EmuNAND9 payload to create emuNAND on your console SD card and then inject your emuNAND.bin using it.
     
    Last edited by Just3DS, Jun 1, 2016
    Drake008 likes this.
  9. Davidosky99

    Davidosky99 Eevee :3

    Banned
    2,582
    1,570
    Jun 7, 2015
    Porto
    Just don't use your GW during the downgrade/entirety of the process and follow plailects guide

    — Posts automatically merged - Please don't double post! —

    @Drake008 because aparenty you didn't read my post to NOT use a gateway and use a SD emunand(not the gateway SD, the 3ds's SD).
     
    Drake008 likes this.
  10. Drake008
    OP

    Drake008 Advanced Member

    Newcomer
    88
    16
    Feb 2, 2008
    Gambia, The
    Thanks for this clarification. I'am a bit dumb or cannot read. Seems that it works now after I defragmented the ctrnand.
     
    Last edited by Drake008, Jun 1, 2016
  11. Davidosky99

    Davidosky99 Eevee :3

    Banned
    2,582
    1,570
    Jun 7, 2015
    Porto
    Remember to not use the gateway in the process not even inserted in the 3ds
     
  12. Drake008
    OP

    Drake008 Advanced Member

    Newcomer
    88
    16
    Feb 2, 2008
    Gambia, The
    SO I'm stuck at Part 4 point 10.

    There should be a dump of Health&Safety happening. I get the error

    SD is not formatted for EmuNAND
    HEalth&Safety Dump: failed

    But I have an emunand (rednand) installed.
     
  13. Drake008
    OP

    Drake008 Advanced Member

    Newcomer
    88
    16
    Feb 2, 2008
    Gambia, The
    SO I think I'am ready with everything. Just one "big" problem I think.

    I do not have the FBI on Safety&Health to install cia files.

    Can I install this somehow?
     
  14. ih8ih8sn0w

    ih8ih8sn0w Koreaboo

    Member
    1,678
    752
    Aug 22, 2015
    United States
    Hell
    Are you actually able to boot into emunand using something other than gateway?
     
  15. Drake008
    OP

    Drake008 Advanced Member

    Newcomer
    88
    16
    Feb 2, 2008
    Gambia, The
    I read a bit more and now everything works. My Sysnand is at 11 with FBI and HBC.
     
  16. CrispyYoshi

    CrispyYoshi GBAtemp Advanced Maniac

    Member
    1,516
    502
    Mar 20, 2010
    United States
    Wait... Are you running a CFW? Or did you mean you updated EmuNand? Otherwise, you've updated SysNand, and can no longer proceed without a hardmod...

    EDIT: I'm surprised nobody suggested, but Decrypt9 is a lot better at injecting/extracting H&S than RxTools is, and should be done instead. (It seems you got it working anyway, though)
     
    Ricken likes this.
  17. Drake008
    OP

    Drake008 Advanced Member

    Newcomer
    88
    16
    Feb 2, 2008
    Gambia, The
    Well I have installed a9lhax installed and can press buttons like "start" "select" "y".

    Under systemsettings I have "Sys 11.0.0-33E" and on the "Desktop" I have the "FBI CIA Installer" instead of Health and Safety. Also hblauncher, sysupdater and lumaupdate.

    I did everything what the instructions told me.

    ---

    I also flashed my old 4.5 sysnand back and now I try to create a new emunand.

    ---

    Seems that I cannot get into Gateway mode somehow.

    ---

    Have I done something wrong?
    How can I install a CFW now?
    If I havve read it correctly I do not need a CFW anymore or is that wrong?

    ---
     
    Last edited by Drake008, Jun 1, 2016
  18. Drake008
    OP

    Drake008 Advanced Member

    Newcomer
    88
    16
    Feb 2, 2008
    Gambia, The
    When I'am down on 4.5 again I cannot start the blue card. I just get a black screen. When I restore the nand to 9.2 I can boot the blue card but it does not work because it is 9.2. That is strange
     
  19. EmperorOfCanada

    EmperorOfCanada GBAtemp Maniac

    Member
    1,479
    96
    Aug 4, 2008
    Canada
    Canada
    Sys 11.0.0-33E is CFW... Im not even sure what the problem is here? You had everything set up and then... got rid of it? or what? Im really not sure what you are trying to do.
     
  20. Drake008
    OP

    Drake008 Advanced Member

    Newcomer
    88
    16
    Feb 2, 2008
    Gambia, The
    Somebody said when SYS is there it is not CFW and that had me thinking I did something wrong.
    So I'am on CFW? Without the Emunand and 3DS file boot?

    Yeah I restored to 4.5 and restored to 9.2 and so on. Now I'am back with my restored 11.0.0-33E in the 3DS.
     
    Last edited by Drake008, Jun 1, 2016