ROM Hack Pokemon Brilliant Diamond & Shining Pearl Cheat Database

[INSTRUMENTAL]

Walk trough walls 1.1.1 cheat code does not work for me in yuzu

These codes are made for the SWITCH. Most codes will not work on yuzu, if they happen to hooray. Also almost every code with an activation button will not work on yuzu.

 

[PokemonBD14]

These codes are made for the SWITCH. Most codes will not work on yuzu, if they happen to hooray. Also almost every code with an activation button will not work on yuzu.

wdym activation button

 

[INSTRUMENTAL]

wdym activation button

All the ones that say "(Hold L)" or similar at the end of the name

 

[PkmBDSP]

For Brilliant Diamond 1.1.2, used the 1.1.1 code and used another set of codes to find the build offset and applied it to the 1.1.1 exp share codes and it reportedly works (I helped someone who has BD get the codes working on 1.1.2, and I have SP).

[Disable Exp Share ON (v1.1.2)]
040A0000 02450350 52800000

[Disable Exp Share OFF (v1.1.2)]
040A0000 02450350 52800020

Thanks a lot !
So if I understood correctly you calculated the offset by doing : '1.1.2 code(s) offset' - '1.1.1 code(s) offset' = X, and then updated the Exp Share code by doing '1.1.1 exp share offset' + X = '1.1.2 exp share offset'?

 

[Stoned]

Thanks a lot !
So if I understood correctly you calculated the offset by doing : '1.1.2 code(s) offset' - '1.1.1 code(s) offset' = X, and then updated the Exp Share code by doing '1.1.1 exp share offset' + X = '1.1.2 exp share offset'?

Yes you can do it.

 

[sogaeon]

None. Removing the lines for (80000040) and (20000000) removes the button activation aspect.
Steps for using the above separated code:
Activate the [Shiny Pokemon (On)] code to make things shiny.
When you want shiny pokemon off just deactivate the first code, then turn on the [Shiny Pokemon Off].

is there any way to change or deactivate it without restarting my game?

 

[Sempai_mugi]

Hello, I tried the codes but it does not work with my pokemon diamond game in 1.1.1. When starting up the game crashes so are the codes compatible with a french version?

 

[FabioCapela]

Hello, I tried the codes but it does not work with my pokemon diamond game in 1.1.1. When starting up the game crashes so are the codes compatible with a french version?

Language doesn't matter, the game is the same in all languages. You can even play it in different languages at the same time using multiple profiles.
Crashing at startup often happens due to not fully reading, and following the instructions in, the first post. Atmosphere will enable all codes by default, which usually crashes the game; the first post tells you how to change that.

 

[fabvvx]

on the pearl 1.1.2 on 11-12-21 version, there aren't the custom encounter codes (arceus, manaphy, etc...)

 

[SALZTRUTH614]

Thanks; Will this work for both games - Diamond and Pearl?

xarfax1105
It should work if you just remove the lines for (80000040) and (20000000), then split the remaining lines into on and off codes. It should be:

[Shiny Pokemon On]
040C0000 020db088 54000720
040C0000 020db098 54000820
[Shiny Pokemon Off]
040C0000 020db088 14000045
040C0000 020db098 14000041

 

[SALZTRUTH614]

Disable all encounter codes, and then enable the "Encounter Off" code and it should stop it.

As for the latter, I can't say for sure, but as far as I know, you can only capture a trainer's first mon. I haven't used the codes myself, so I can't really say for sure.


Good to hear another source say it works.

THANKS I will definitely try that route. I was hoping to encounter all level 50 pokemon to avoid leveling them up with battling them up individually for evolution.

 

[WabiSabi]

can anyone briefly explain what the "gba" codes are for? just curious as I've seen them and it picked my curiosity

 

[RedScorpion]

can anyone briefly explain what the "gba" codes are for? just curious as I've seen them and it picked my curiosity

https://www.serebii.net/diamondpearl/gbapokemon.shtml

 

[Frank9000]

Request a national dex encounter cheat

 

[Frank9000]

As you requested i updated his code to work on diamond at least 1.1.2

This one works with the national dex though

[Encounter On (v1.1.2)]
04000000 01AFBC84 18FFFDDA
04000000 01AFBCA8 18FFFC94

[Encounter National Dex 1.1.2]
80000080
04000000 01AFBC38 00000000
580A0000 04C10500
580A1000 000002C8
580A1000 00000020
540A1000 000007A8
A4A00400 01AFBC3C
20000000

goto pokedex and click a to view a pokemon you got registered tap R button then you can go into the grass or whatever to encounter the mon you want

Credits to Patjenova for the original code that i updated.

Ill try to make one for pearl for you.

So I tried and got the hand of it, you can view any national Pokémon and before encounter you need to press R, without viewing the Pokémon you’ll get a random.. but I still get the white screen after two random encounters or chosen encounters

 

[OblivionReign]

Thanks; Will this work for both games - Diamond and Pearl?

Look in main poat download cheat file. It has the shiny for diamond and 1 for pearl just break them apart liek mentioned. They are not going to work both games same code.

 

[INSTRUMENTAL]

is there any way to change or deactivate it without restarting my game?

I'm assuming you're on an emulator?
If so, as far as I'm aware no.

(Given that I've only briefly used yuzu and haven't touched ryujinx ever, it's possible I'm wrong on this, but from other posts I've seen with people talking about it, I'm quite certain I'm right.)

 

[INSTRUMENTAL]

@SkyQueen Sorry to bother you, I hope you're doing okay. I was wondering if you'd be up to doing an faq section on the main page?
That way we can just direct the same questions to the faq with the answers already there.

 

[i_liek_katz]

is there any way to change or deactivate it without restarting my game?

If you're playing on emulator, just move your save to your SD card, use JKSV and import your save to your Switch, and then use the deactivate code.

 

[INSTRUMENTAL]

If you're playing on emulator, just move your save to your SD card, use JKSV and import your save to your Switch, and then use the deactivate code.

1. This is just utter nonsense. That's not how codes work.
2. Most people using emulators are probably doing so because they don't have a hackable switch, so even if this was how codes worked, it still wouldn't be helpful.
3. Please don't post 'advice' when you don't know what you're talking about.

(Just as an aside, my post just above yours already answered this anyway, even if you did have a correct answer, you can see that I've already provided such an answer.)