Hacking On a scale of 1 to 10 how screwed am I with this gateway card?

[Shadowtrance]

Yeah i found the PH00 2.0 Phillips fits well, nice and snug. Seems there's 2 different size PH00's (might actually be others), but i have 2 different PH00 sizes in my kit. PH00 1.5 and PH00 2.0.

Still waiting for my StarTech card reader from amazon before i can do anything with my n3ds though. Gonna be pissed if it doesn't work. haha

 

[Avalynn]

Yeah i found the PH00 2.0 Phillips fits well, nice and snug. Seems there's 2 different size PH00's (might actually be others), but i have 2 different PH00 sizes in my kit. PH00 1.5 and PH00 2.0.

Still waiting for my StarTech card reader from amazon before i can do anything with my n3ds though. Gonna be pissed if it doesn't work. haha

There should only be one head size which is PH00 the other measurements typically refer to the length from handle to point or overall length or maybe the shaft diameter. If they are the same length and different head then that is strange as I have many PH0/00/000 from Craftsman, Klein Tools, Wiha, Wera, and Moody just to name a few that all ab out fit the same, except the cheaper ones I have gotten from those screen replacement kits.

It can largely depends on the quality of the head whether it fits snugly or not, the PH0 fits very snugly but the PH00 is easier to use because of the shaft diameter fits better in the screw slots.

Hope that card reader works let me know please!

 

[Shadowtrance]

There should only be one head size which is PH00 the other measurements typically refer to the length from handle to point or overall length. If they are the same length and different head then that is strange as I have many PH0/00/000 from Craftsman, Klein Tools, Wiha, Wera, and Moody just to name a few.

It can largely depends on the quality of the head whether it fits snugly or not, the PH0 fits very snugly but the PH00 is easier to use because of the shaft diameter fits better in the screw slots.

Hope that card reader works let me know please!

Not sure tbh, it may just be mislabeled or something. It is only a $20 set so nothing spectacular. haha the bits are the same length, just the 2.0 is slightly thicker than the 1.5.

And yes i will surely report on the card reader once i get it.

Spoiler

 

[Avalynn]

I think that refers to the shaft diameter a lot of them are 2.0, as you can see the 1.5 is smaller while the 2.0 is fatter but the head were the screw fits in is the same. Sorry didn't mean to derail this thread about screwdriver here
Lol buuut since you are showing off your tool set:

Spoiler: My screwdriver sets and desk

 

[Shadowtrance]

Got enough screwdrivers Avalynn? haha

Nice Metcal Iron you got there.

I'm pretty happy with my new Hakko FX-888D Could do with a few different tips though i think. Must get around to buying a few.

 

[Avalynn]

Got enough screwdrivers Avalynn? haha

Nice Metcal Iron you got there.

I'm pretty happy with my new Hakko FX-888D Could do with a few different tips though i think. Must get around to buying a few.

Thanks lol I have 2 Metcals, and 1 Hakko (pretty old one), 2 wellers and a edysn de-soldering unit and about 60 or so odd tips when some companies were upgrading and getting rid of these, or bought them broken and fixed it. I love love my metcal and the precision tips it has, and we should stop talking about tools or make a new thread in the hardware section

 

[MrJason005]

over 9000
yeah, not any time soon
do you have a NAND backup?
also i think one of the developers of KARL said they did find an exploit on 9.3 or above, i think

 

[joex11]

Thanks for all the quick responses guys!

The lack of faith in an update disturbed me and I just needed some guidance.

i asked gateway about their 9.6 support, and the answer is:

soon®
or
soon™

 

[EmceeKerser]

I got a #00 Phillips head and the shaft was too thick and the point was too narrow. So I just got a 1.5 flathead and filed it down. Worked perfectly

 

[GhostLatte]

i asked gateway about their 9.6 support, and the answer is:

soon®
or
soon™

Or Just Around the Corner™.