What is your Goal after creating an Emunand?
Will you use it with Atmosphere or SX.
There's no "easy" Way to use them both.
You can create a "File Based" Emunand in SX OS and migrate it in Hekate to Atmosphere.
Each Time you want to switch between CFW's you have to migrate it back and forth...
What i'd recommend:
Only use SX OS. (Just if you really need an Emunand)
or
Don't use Emunand at all... (since you never mentioned, that you need a Clean SYS Nand for Online Play)
(In this Case you can easily switch between SX OS & Atmosphere)
In both Cases do what Canna said:
Inject the latest Hekate.bin with TegraRCMGui or SX OS and Backup the following Files:
Boot 0/1
Rawnand.bin
Biskeys
To do so:
01. Download TegraRCMGui, Hekate & Biskeydump
02. Extract all the Files
03. Move the biskeydump.bin File to your fresh extracted \bootloader\payloads Folder
04. Format your micro SD to exFat
05. Copy the bootloader Folder to the Root of your micro SD
06. Inject Hekate.bin with TegraRCMGui
06. Inject Hekate.bin with SX OS
(Copy Hekate.bin to the Root of your Micro SD. Insert your SX Dongle, when you see the SX OS Boot Screen HOLD the VOL+ Button.
The SX OS Boot Menu will appear, choose Options and select Payloads and Press on Hekate.bin)
07. Tools
08. Backup eMMC
09. eMMC BOOT0 & BOOT1 (Wait for Finished & Verified)
10. x Close
11. Backup eMMC RAW GPP (Wait for Finished & Verified) (This will take about ~1h)
12. Home
13. Payloads
14. biskeydump.bin
15. A Screen with a Smiley and a QR Code will appear: Press the Vol- to Backup your Biskeys
16. Press Power to turn off your Console
Eject your micro SD and insert it into your PC, copy your Backups to your PC and keep them SAFE!!
Congratulation you have successfully backed up All your Important Files!
Micro SD Setup:
Download: Gui Format and format your Micro SD to FAT32.
SX OS Emunand Setup:
Check if you already have a license.dat File.
If not follow this Guide
If yes follow this Guide
Dual Boot SX OS & Atmosphere (without Emunand):
Download the latest Atmosphere Build + fusee-primary.bin and its Sigpatches.
Download the latest SX OS (boot.dat)
01. Extract all the Files
02. Copy the Contents from Atmosphere (Atmosphere / Sept / switch Folder & hbmenu.nro) to the Root of your FAT32 formatted micro SD
03. Copy the Sigpatches (exefs_patches & kip_patches Folder) to your \Atmosphere\ Folder
04. Copy the fusee-primary.bin to the Root of your micro SD (If you like you can rename it to Atmosphere.bin)
05. Copy your SX OS boot.dat & license.dat to the Root of your micro SD
To switch between both CFW's, shut down your Console.
Boot Atmosphere:
Insert your SX Dongle, when you see the SX OS Boot Screen HOLD the VOL+ Button.
The SX OS Boot Menu will appear, choose Options and select Payloads and Press on fusee-primary.bin / Atmosphere.bin
Boot SX OS
Simply insert your SX Dongle.
Update your Firmware:
After you managed to successfully boot into SX OS or Atmosphere, its Time to Update your Firmware. (I always recommend updating via Atmosphere)
Download ChoiDuJourNX.nro and copy it into your Switch Folder
01. Google for: Switch Firmware Files
02. Download the latest Firmware (10.0.4)
03. Extract the Zip File to the Root of your micro SD
04. Go to the Homebrew Menu (SX OS Tap the Album Icon) (Atmosphere Hold R & Tap the Album Icon)
05. Launch ChoiDuJourNX
06. Choose your Firmware Folder and follow the Onscreen Instructions
07. Choose exFat when prompted (even if you actually don't need it)
08. Shutdown your Console when prompted
09. Insert your Dongle and choose either SX OS or Atmosphere
Will you use it with Atmosphere or SX.
There's no "easy" Way to use them both.
You can create a "File Based" Emunand in SX OS and migrate it in Hekate to Atmosphere.
Each Time you want to switch between CFW's you have to migrate it back and forth...
What i'd recommend:
Only use SX OS. (Just if you really need an Emunand)
or
Don't use Emunand at all... (since you never mentioned, that you need a Clean SYS Nand for Online Play)
(In this Case you can easily switch between SX OS & Atmosphere)
In both Cases do what Canna said:
Inject the latest Hekate.bin with TegraRCMGui or SX OS and Backup the following Files:
Boot 0/1
Rawnand.bin
Biskeys
To do so:
01. Download TegraRCMGui, Hekate & Biskeydump
02. Extract all the Files
03. Move the biskeydump.bin File to your fresh extracted \bootloader\payloads Folder
04. Format your micro SD to exFat
05. Copy the bootloader Folder to the Root of your micro SD
06. Inject Hekate.bin with TegraRCMGui
06. Inject Hekate.bin with SX OS
(Copy Hekate.bin to the Root of your Micro SD. Insert your SX Dongle, when you see the SX OS Boot Screen HOLD the VOL+ Button.
The SX OS Boot Menu will appear, choose Options and select Payloads and Press on Hekate.bin)
07. Tools
08. Backup eMMC
09. eMMC BOOT0 & BOOT1 (Wait for Finished & Verified)
10. x Close
11. Backup eMMC RAW GPP (Wait for Finished & Verified) (This will take about ~1h)
12. Home
13. Payloads
14. biskeydump.bin
15. A Screen with a Smiley and a QR Code will appear: Press the Vol- to Backup your Biskeys
16. Press Power to turn off your Console
Eject your micro SD and insert it into your PC, copy your Backups to your PC and keep them SAFE!!
Congratulation you have successfully backed up All your Important Files!
Micro SD Setup:
Download: Gui Format and format your Micro SD to FAT32.
SX OS Emunand Setup:
Check if you already have a license.dat File.
If not follow this Guide
If yes follow this Guide
Dual Boot SX OS & Atmosphere (without Emunand):
Download the latest Atmosphere Build + fusee-primary.bin and its Sigpatches.
Download the latest SX OS (boot.dat)
01. Extract all the Files
02. Copy the Contents from Atmosphere (Atmosphere / Sept / switch Folder & hbmenu.nro) to the Root of your FAT32 formatted micro SD
03. Copy the Sigpatches (exefs_patches & kip_patches Folder) to your \Atmosphere\ Folder
04. Copy the fusee-primary.bin to the Root of your micro SD (If you like you can rename it to Atmosphere.bin)
05. Copy your SX OS boot.dat & license.dat to the Root of your micro SD
To switch between both CFW's, shut down your Console.
Boot Atmosphere:
Insert your SX Dongle, when you see the SX OS Boot Screen HOLD the VOL+ Button.
The SX OS Boot Menu will appear, choose Options and select Payloads and Press on fusee-primary.bin / Atmosphere.bin
Boot SX OS
Simply insert your SX Dongle.
Update your Firmware:
After you managed to successfully boot into SX OS or Atmosphere, its Time to Update your Firmware. (I always recommend updating via Atmosphere)
Download ChoiDuJourNX.nro and copy it into your Switch Folder
01. Google for: Switch Firmware Files
02. Download the latest Firmware (10.0.4)
03. Extract the Zip File to the Root of your micro SD
04. Go to the Homebrew Menu (SX OS Tap the Album Icon) (Atmosphere Hold R & Tap the Album Icon)
05. Launch ChoiDuJourNX
06. Choose your Firmware Folder and follow the Onscreen Instructions
07. Choose exFat when prompted (even if you actually don't need it)
08. Shutdown your Console when prompted
09. Insert your Dongle and choose either SX OS or Atmosphere
Last edited by crazy_p,