Hardware OLD 3DSXL top screen flickers/blink when play any 3d game which support 3d

[wormdood]

I mean if it works it works but it's really just a stopgap I'd rather find a permanent solution as I'm sure you rather have a permanent solution

 

[darkwolfyk9]

I mean if it works it works but it's really just a stopgap I'd rather find a permanent solution as I'm sure you rather have a permanent solution

It has 1 hour since I have been powering on the n3ds by taking out the battery and one thing that I noticed is that when i power on my 3ds putting battery back in it was on low battery life and I left my 3ds on 3 life like u 3 bars and then again i blug out the battery and try to turn it on after a half hour I put the battery back and run my system the bars were back to 3 I don.t understand how and one more this don.t fix the problem my screen still blink and flicker after some time playing a game which support 3e

 

[darkwolfyk9]

mine's a dual IPS Hyrule Edition as well I wonder if it's some defect in that product that's causing this to happen @darkwolfyk9 can I ask what kind of 3DS you were using when you experienced this issue

Sorry I didn't read this message of ur I use old3dsxl normal one no special model

 

[darkwolfyk9]

@wormdood got any solution plz

 

[darkwolfyk9]

@wormdood I,m dying help me I can,t bear it plzzzzzz bro plzzzz

 

[Flame]

@darkwolfyk9 you need to stop with the dumping of this thread every two seconds.

if people can help you they will.

 

[wormdood]

@wormdood I,m dying help me I can,t bear it plzzzzzz bro plzzzz

now that I've had some time to sleep on it I'm actually thinking less towards a loose ribbon Cable it seems more that your nand itself is failing to test for this we could create an emuNand (gm9 can do this) have you load that and see if the problem persist

--------------------- MERGED ---------------------------

Dude I was asleep. I do need that sometimes. I have a life outside and off this thread

 

[darkwolfyk9]

@wormdood i,m fuxked up so badly right now i can,t use my 3ds now it is not only blinking and flickering i,m getting an error occured message when i open eshop this happened when my stupid mind thought that by uninstalling my custom firmware my 3ds will not blink or flickers and i will reinstall my firmware afterward but as soon as i uninstall my firmware my 3ds works fine but the blinking and flickering problem still their plus i can,t use eshop it show me an has occured that annoying message now i can,t even install my firmware im fuxked up so badly((

--------------------- MERGED ---------------------------

now that I've had some time to sleep on it I'm actually thinking less towards a loose ribbon Cable it seems more that your nand itself is failing to test for this we could create an emuNand (gm9 can do this) have you load that and see if the problem persist

--------------------- MERGED ---------------------------

Dude I was asleep. I do need that sometimes. I have a life outside and off this thread

i,m sorry i over reacted a little but so much worried its k u can take u time i be waiting for ur solution

 

[wormdood]

fuxked up so badly right now i can,t use my 3ds now it is not only blinking and flickering i,m getting an error occured message when i open eshop this happened when my stupid mind thought that by uninstalling my custom firmware my 3ds will not blink or flickers and i will reinstall my firmware afterward but as soon as i uninstall my firmware my 3ds works fine but the blinking and flickering problem still their plus i can,t use eshop it show me an has occured that annoying message now i can,t even install my firmware im fuxked up so badly((

well that is an issue ... I'm going to say it getting rid of CFW is never the solution to an issue caused by CFW by the way as I was mentioning earlier I don't believe that your issue is even caused by CFW I believe it's a hardware issue their either way but we do need CFW back if we are to troubleshoot it what I want you to do is power off your device hold the select button and Power on tell me if the Luma settings menu still shows up

 

[darkwolfyk9]

well that is an issue ... I'm going to say it getting rid of CFW is never the solution to an issue caused by CFW by the way as I was mentioning earlier I don't believe that your issue is even caused by CFW I believe it's a hardware issue their either way but we do need CFW back if we are to troubleshoot it what I want you to do is power off your device hold the select button and Power on tell me if the Luma settings menu still shows up

but i need to a custom firmware for it which i lost i can,t even reinstall cuz it require eshop which show error while launching error like this
black screen pop up an error has occured as soon as this error is gone i will reinstall my custom firmware this firmware require the eshop app which is pokemon picross i guess but i don,t how to remove this error i search every where but can,t find the solution

 

[wormdood]

but i need to a custom firmware for it which i lost i can,t even reinstall cuz it require eshop which show error while launching error like this
black screen pop up an error has occured as soon as this error is gone i will reinstall my custom firmware this firmware require the eshop app which is pokemon picross i guess but i don,t how to remove this error i search every where but can,t find the solution

I realize you're concerned with your unusable eShop the eShop is not the only way to install custom firmware but first and foremost I want to test and see if it was removed properly which is why I want you to power down the console hold select and Power on the console if the luma settings screen still shows up then you do indeed still have CFW if it doesn't show up then we may need to try another method like in ntrboot compatible flash card and if I'm reading correctly one of the minor methods doesn't require the eShop either

 

[darkwolfyk9]

I realize you're concerned with your unusable eShop the eShop is not the only way to install custom firmware but first and foremost I want to test and see if it was removed properly which is why I want you to power down the console hold select and Power on the console if the luma settings screen still shows up then you do indeed still have CFW if it doesn't show up then we may need to try another method like in ntrboot compatible flash card and if I'm reading correctly one of the minor methods doesn't require the eShop either

k i have uninstalled my firmware cuz god mode and luma don,t show now when i press power+start or power+select it shows nothing i directly boot to the home menu

--------------------- MERGED ---------------------------

@wormdood do u know how to solve the error (an error has occurred hold down power button and try again)

 

[wormdood]

@wormdood do u know how to solve the error (an error has occurred hold down power button and try again)

honestly at this point I can't tell what's actually wrong with your eShop because the more detailed error message that Luma gives isn't there and any tools that would fix it would require custom firmware so we have to work on one problem at a time from reading it seems like you can use seedminer with Banner bomb in order to install CFW without actually owning a DSiware game as bannerbomb injects the modified dsiware game directly into your DS settings app and not into a previously existing dsiware game ... I've read the instructions twice and I can't find anywhere we're actually mentions the eShop or a DSI game to exploit so a non-functional eShop shouldn't be an issue

 

[darkwolfyk9]

honestly at this point I can't tell what's actually wrong with your eShop because the more detailed error message that Luma gives isn't there and any tools that would fix it would require custom firmware so we have to work on one problem at a time from reading it seems like you can use seedminer with Banner bomb in order to install CFW without actually owning a DSiware game as bannerbomb injects the modified dsiware game directly into your DS settings app and not into a previously existing dsiware game ... I've read the instructions twice and I can't find anywhere we're actually mentions the eShop or a DSI game to exploit so a non-functional eShop shouldn't be an issue

so right now i should install a custom firmware

 

[wormdood]

so right now i should install a custom firmware

Yes sir back To 3DS.Hacks.Guide for you

Edit: if seedminer and bannerbomb don't work for you then you'll probably have to get yourself a ntrboot compatible flash card because custom firmware is necessary to fix any of these issues

 

[darkwolfyk9]

Yes sir back To 3DS.Hacks.Guide for you

k im on it i will mention u when i,m done installing custom firmware

 

[The Real Jdbye]

Yeah the long-winded solution is your consoles nand store some of the power on there and what you're trying to do is desync the battery and remove all the power that's currently in the console and to do that you have to try to power it on without any power source connected to it so pop out the battery don't plug in the console and try to power it on about 5 or 6 times this should get all the residual energy out of the nand then when you put the battery back in and power it on the problem will seem to have resolved itself

Pretty sure it's got nothing to do with the NAND as there are no facilities in the NAND chip for storing power, however capacitors can store power after the console has been turned off so maybe that was the issue. Weird issue for sure though, never heard of symptoms like that being caused by weirdness with capacitors.

 

[wormdood]

Pretty sure it's got nothing to do with the NAND as there are no facilities in the NAND chip for storing power, however capacitors can store power after the console has been turned off so maybe that was the issue. Weird issue for sure though, never heard of symptoms like that being caused by weirdness with capacitors.

well I also did mention that when it comes to Hardware I'm sort of poking around in the dark it's not my best subject anyway thanks for the correction

 

[darkwolfyk9]

i

Pretty sure it's got nothing to do with the NAND as there are no facilities in the NAND chip for storing power, however capacitors can store power after the console has been turned off so maybe that was the issue. Weird issue for sure though, never heard of symptoms like that being caused by weirdness with capacitors.

idk get that cuz i don,t know about software or hardware thingy still gonna like

 

[darkwolfyk9]

@wormdood i successfully installed custom firmware now to the main thing which was blinking and flickering is still their any idea to solve it