NTR CFW Video Streaming - Higher FPS Custom Settings VS Stock Settings

Discussion in '3DS - Flashcards & Custom Firmwares' started by TCPixel, Oct 11, 2016.

  1. TCPixel
    OP

    TCPixel Advanced Member

    Newcomer
    63
    261
    Nov 2, 2015
    United States
    One of the most important features that modded 3DS allow is video streaming to a computer via NTR Cfw. Using the stock settings and the latest version can yield decent results, but with a bit of tweaking you can get increases of 10+ frames consistently depending on your wireless setup.

    First of all start NTR Debugger and use the connect command to connect to your IP
    connect('192.168.0.XXX', 8000)

    Here is the default settings for NTR
    remoteplay(priorityFactor = 5, quality = 90, qosValue = 20)

    And my modified settings
    remoteplay(priorityFactor = 2, quality = 80, qosValue = 100)

    It reduced the quality just a bit, almost not even noticeable. The bottom screen also benefits from this as it is much smoother than stock settings.
    My wireless setup is pretty simple, I have an old dual band router, am about 5-7 feet away from it, and used my laptop on the 5 Ghz network.

    Here is the results, the difference is actually pretty incredible
     
    dmc310, Queno138 and LinkSoraZelda like this.
  2. Majickhat55

    Majickhat55 Jabberwocky Slayer

    Member
    2,840
    1,324
    Mar 28, 2016
    United States
    Underland
    There is an entire thread dedicated to this here.