[No longer maintained] RajNX - starter pack for Nintendo Switch

Discussion in 'Switch - Exploits, Custom Firmwares & Soft Mods' started by rajkosto, Aug 4, 2018.

  1. Don Jon

    Don Jon GBAtemp Maniac

    Member
    7
    Nov 20, 2015
    United States
    so if im on 4.01
    for exfat do i first use chahohanx and than update to latest
    or do i update first and than run chahohanx?
     
  2. Lacius

    Lacius GBAtemp Legend

    Member
    18
    May 11, 2008
    United States
    You don't have to update for exFAT. If you do want to update, you can do both at the same time using ChoiDujourNX.
     
  3. rajkosto
    OP

    rajkosto GBAtemp Advanced Fan

    Member
    11
    Apr 6, 2017
    just install 4.1.0 (exFAT) via ChoiDujourNX if you want exFAT and you're on 4.x
     
    Last edited by rajkosto, Aug 13, 2018
  4. raphamotta

    raphamotta GBAtemp Advanced Fan

    Member
    6
    Jul 12, 2013
    Hi Raj, today one of my friends tried to connect to Internet when I went out. Luckily he couldn't.

    What do you think for an option to disable wifi from NS? That way we can avoid kinds and friends to connect to Internet and ban.
     
    suzsuzuki and SaffronXL like this.
  5. omgwtfuuu

    omgwtfuuu Newbie

    Newcomer
    1
    Aug 13, 2018
    Canada
    Hi!
    New to the Switch scene. Using RajNX 072 and can't get NSP to load properly. Using 4nxci for my xci conversion. Tried adding newest tinfoil.nro. Tried my original FW 4.1 and also on 5.1. Have read through this thread without finding the answer.
    Keep getting an error when I try to load from the home menu. "The software was closed because an error occurred".
    I'm probably missing something basic and still figuring it out.
    Any insight would be appreciated. Thanks in advance
    Also, thanks for ChoiDuJourNX, solved my exfat problem easily.
     
  6. Serfrost

    Serfrost GBAtemp Fan

    Member
    3
    Jan 7, 2015
    United States
    Tell your friends that internet access will brick the Switch and they'll have to pay you for it. There's no decisive permanent Wifi disabling at this time.

    If there were, I'd use it myself. I'm sure it's been brought up, nothing has been done. Unless it's just a sysmodule / service that needs blocked.
     
  7. Mr. Wizard

    Mr. Wizard Ending the spread of bullshit one thread at a time

    Member
    8
    Mar 20, 2015
    Canada
    E8 lattice
    Open it up and disconnect the wifi. Only takes a couple minutes.
     
    Quantumcat likes this.
  8. Dfroberts86

    Dfroberts86 Advanced Member

    Newcomer
    3
    Jun 27, 2018
    United States
    Nsps from 4nxci do not currently work with rajnx. I'm not sure if that will be added in the future. Reinx does work with those.

    Sent from my BND-L24 using Tapatalk
     
  9. vastrolorde

    vastrolorde Advanced Member

    Newcomer
    5
    Mar 22, 2015
    United States
    my firmware is 5.1.0 is there any easy way to add exfat support. im sorry for my newbie question:shy:, but when i download the hactool gui. seems it only works on x64 based system. just like hacdiskmount. i already have an xci file game to extract the update. thanks in advance..:):)
     
  10. xabier

    xabier GBAtemp Fan

    Member
    5
    Dec 10, 2006
    United States
    Just insert an exfat card and let it update officially.
     
    Last edited by xabier, Aug 13, 2018
  11. Mr. Wizard

    Mr. Wizard Ending the spread of bullshit one thread at a time

    Member
    8
    Mar 20, 2015
    Canada
    E8 lattice
    ChoiDujourNX, the homebrew one that runs on the switch. Not the PC version.

    https://switchtools.sshnuke.net/
     
    Last edited by Mr. Wizard, Aug 13, 2018
  12. Benjay

    Benjay Hardstyle Addict

    Member
    4
    May 25, 2009
    France
    Amiens
    Believe me, you're wasting your time with this so called Switch scene.
    Most of the people and devs here are just a bunch of 10 years old children with over inflated egos spending their time feeding dramas...
    I'm pretty sure none of them do know you, where I can clearly remember you from the good old Wii days and everything you've contributed to.
    I was part of the WiiFlow team at that time, and I truly wish the Switch scene could be as to what the Wii scene was, with devs from different USBLoaders helping each others bringing new features to their respective loaders.
    But I've been lurking this section for a long time now and I can clearly see it will never happen sadly...
    GBATemp has become just a giant kindergarten over the years.

    PS: yeah, I know I'm OT but I really don't care ;-)
     
    DarthDub and Slimmmmmm like this.
  13. xabier

    xabier GBAtemp Fan

    Member
    5
    Dec 10, 2006
    United States
    That's an overkill, it doesn't make any sense to update using homebrew and risking a ban when you are already running latest OFW
     
  14. Mr. Wizard

    Mr. Wizard Ending the spread of bullshit one thread at a time

    Member
    8
    Mar 20, 2015
    Canada
    E8 lattice
    I think you mean this is the easiest and best way to NOT get banned, considering homebrew and xci have already been used. Upgrading officially online would most likely get you banned, not choidujoirnx.

    What are you rambling about?
     
  15. omgwtfuuu

    omgwtfuuu Newbie

    Newcomer
    1
    Aug 13, 2018
    Canada
    Thanks, thought I saw that somewhere in the thread, but no mention of which nsps DO work? Or which xci converter to use?

    As above, I'd say use ChoiDuJournx, it worked like a charm for me.
     
  16. xabier

    xabier GBAtemp Fan

    Member
    5
    Dec 10, 2006
    United States
    From what I read he has the hacks PC side but he can't run them because of being x64, no mention of homebrew in switch.

    I m just pointing that he doesn't need any hack. It s a 30 seconds job that can be done the official way, it would be a different situation on older firmware but he is using latest.

    Mind your manners please, don't be so aggressive.
     
  17. Mr. Wizard
    This message by Mr. Wizard has been removed from public view by x65943, Aug 13, 2018, Reason: Needlessly inflammatory.
    Aug 13, 2018
  18. Serfrost

    Serfrost GBAtemp Fan

    Member
    3
    Jan 7, 2015
    United States
    If you haven't ran any CFW or Homebrew, and your Switch is clean on 5.1.0 by normal update -- Update for exfat the normal way.

    If you have already started messing around with CFW and whatnot, then download ChoiDujourNX (not ChoiDujour) and put it into your SD:\switch\ folder, then grab the respective update for your console from xbins, using their handy autoxbins program to use their FTP server. After you download what firm you wish to be using, drop it into a folder on your SD Card, then open ChoiDujourNX and navigate to that firmware folder. Select it. On the next screen you'll be asked if you want the exFat version or not; of course, select it.

    ChoiDujourNX will also install AutoRCM. If you don't know what that's about, please look it up and study.

    After it updates you should be fine.
     
    Last edited by Serfrost, Aug 13, 2018
    XaneTenshi likes this.
  19. Dfroberts86

    Dfroberts86 Advanced Member

    Newcomer
    3
    Jun 27, 2018
    United States
    You will need to download actual nsp backups, not converted ones. The best ways I've found to download them are using Bob's cdnsp gui on the Pc.

    EDIT: actually , I just saw that a new version of 4nxci was just released that is supposed to work with rajnx or any other custom firmware. You may want to try reconverting an xci with the newest release and see if that works.
     
    Last edited by Dfroberts86, Aug 13, 2018
  20. Codiox

    Codiox GBAtemp Regular

    Member
    5
    Jan 19, 2016
    South Africa
    Can I make a NAND backup with this? Or do I need hekate?
     
  21. Serfrost

    Serfrost GBAtemp Fan

    Member
    3
    Jan 7, 2015
    United States
    You can make a NAND backup in the Tools section after you boot into the Boot Menu.
     
Loading...