Try other cables and/or ports.Did you manage to fix this issue please let me know
This happened to me to so I swapped to my chromebook using https://fusee-gelee.firebaseapp.com/# It works for me (DOoesn't work on windows cause of lack of usb support)I tested installing TegraRCMGui drivers and using Zadig but TegraRCM cannot detect it.
View attachment 136472
Well this is a thread for Windows devices but if your Mac is not detecting your console is in RCM, then it is most likely not in RCM.help me I have MacBook Pro M1 this is work?
APX is the name the console displays when its in RCM and plugged into your computer via USB. If its not displayed as an APX device, try using other USB ports and/or cables.Hello, I have this problem that the RCM does not connect me, I already used the zadig and I did not find that version, the closest thing was libusb-win32 (v1.2.6.0)
it didn't work and then I used libusbK (v3.1.0.0) as close as possible.
and I don't know where the APX comes out? were can I see them? I have no knowledge of anywhere something called APX appears so when choosing point 2. I put nintenod switch
hello at the end delete all the folders except nintendo and emmc and did the update again without putting the firmware folderAPX is the name the console displays when its in RCM and plugged into your computer via USB. If its not displayed as an APX device, try using other USB ports and/or cables.
Have you tried with another cable ? I know for a fact that somehow sometimes a cable that can be used with a controller or anything else just won't work the Switch, idk why but it just won't. Had to buy a very very rigid amazon basics cable to be SURE this one works all the timeI have a similar problem. I have an unpatched Switch (XAJ700144...), and when I place the jig, it goes into RCM, but when I connect it to the computer, TegraRCM does not detect it, nor does Windows make the sound it makes when a device is connected. I have already ruled out these possibilities:
- The switch displays the image on the TV, so it does not have a defective USB port and it is transferring data.
- I have checked the serial number in the console settings and it is the one mentioned above, which belongs to the vulnerable consoles.
- Other consoles do recognize them but this one doesn't. I reinstalled the drivers just in case but it's still the same.
- I also tried with the NX loader app and the same thing, the other console recognizes it as RCM but this one does not.
It seems very strange to me because the console is one of the 100% unpatched batches (which is not one of those that is in a limbo) and everything seems to be in order, but I still can't get it to be detected... It occurs to them any solution?
Yes, I have a couple of good quality cables and through none of them is detected. anyway, it's strange because my other console is detected but this one specifically not...Have you tried with another cable ? I know for a fact that somehow sometimes a cable that can be used with a controller or anything else just won't work the Switch, idk why but it just won't. Had to buy a very very rigid amazon basics cable to be SURE this one works all the time