Hacking Luma3DS - Noob-proof 3DS Custom Firmware

[RealityNinja]

Do I have to remove ARM to install the edited one?

Use the SafeA9LHInstaller with a full install (otp not needed because you have already installed arm9loaderhax.)

 

[UranusDarkness]

Use the SafeA9LHInstaller with a full install (otp not needed because you have already installed arm9loaderhax.)

When i press select says: secret_sector.bin doesn't exist or has a wrong size

 

[RealityNinja]

When i press select says: secret_sector.bin doesn't exist or has a wrong size

sha-256 of the secret_sector.bin
82F2730D2C2DA3F30165F987FDCCAC5CBAB24B4E5F65C981CD7BE6F438E6D9D3

Did you read the OP(how to use)? http://gbatemp.net/threads/safea9lhinstaller.419577/

 

[astronautlevel]

When i press select says: secret_sector.bin doesn't exist or has a wrong size

Does your secret_sector.bin exist?

 

[UranusDarkness]

yes. But how can I check sha-256?

 

[astronautlevel]

yes. But how can I check sha-256?

http://hash.online-convert.com/sha256-generator

 

[laharl22]

there are recent stage 2 payload for update A9LH?

 

[astronautlevel]

there are recent stage 2 payload for update A9LH?

Only update if there are features that you can't live without. Right now, there's been nothing major besides screen init, which you probably already have.

 

[UranusDarkness]

sha-256 of the secret_sector.bin
82F2730D2C2DA3F30165F987FDCCAC5CBAB24B4E5F65C981CD7BE6F438E6D9D3

Did you read the OP(how to use)? http://gbatemp.net/threads/safea9lhinstaller.419577/

the sha-256 is correct. Can you send me your secret_sector.bin please?

 

[RealityNinja]

the sha-256 is correct. Can you send me your secret_sector.bin please?

google it ("Part 5 (arm9loaderhax & AuReiNAND)") the data_input...

 

[UranusDarkness]

google it ("Part 5 (arm9loaderhax & AuReiNAND)") the data_input...

I did it but the brightness didn't change

 

[astronautlevel]

I did it but the brightness didn't change

Can I see a picture? Which fork of a9lh did you use?

 

[RealityNinja]

Can I see a picture? Which fork of a9lh did you use?

He uses delebile's one.

 

[astronautlevel]

He uses delebile's one.

I had that problem on delebile's fork, switching to Aurora Wright's fork fixed it.

 

[RealityNinja]

I had that problem on delebile's fork, switching to Aurora Wright's fork fixed it.

same

 

[wiiuser2]

Update your armips and make sure you have bin2c.

Thanks a lot. Working fine now.
Both versions of armips and bin2c were outdated.

 

[astronautlevel]

Thanks a lot. Working fine now.
Both versions of armips and bin2c were outdated.

Glad I could help out

 

[Argentlan]

I'm on Ubuntu 15.10 but i'm not able to compile anymore for some reason
I have bin2c and lastest armips
@Aurora Wright What am I doing wrong?

Spoiler: Terminal

argentlan@ubuntunote:~$ armips
ARMIPS64 Assembler v0.8.0 (Mar 23 2016 23:17:27) by Kingcom
Usage: armips file.asm [-temp temp.txt] [-sym symfile.sym]

argentlan@ubuntunote:~$ bin2c --version
bin2c: NVIDIA (R) File to C data converter
Copyright (c) 2005-2014 NVIDIA Corporation
Built on Thu_Jul_17_21:41:11_CDT_2014
Cuda compilation tools, release 6.5, V6.5.12


argentlan@ubuntunote:~$ git clone --recursive http://github.com/AuroraWright/AuReiNand.git
Cloning into 'AuReiNand'...
remote: Counting objects: 1062, done.
remote: Compressing objects: 100% (13/13), done.
remote: Total 1062 (delta 6), reused 0 (delta 0), pack-reused 1049
Receiving objects: 100% (1062/1062), 4.55 MiB | 1.14 MiB/s, done.
Resolving deltas: 100% (613/613), done.
Checking connectivity... done.
Submodule 'CakeBrah' (https://github.com/mid-kid/CakeBrah) registered for path 'CakeBrah'
Submodule 'CakeHax' (https://github.com/mid-kid/CakeHax) registered for path 'CakeHax'
Cloning into 'CakeBrah'...
remote: Counting objects: 514, done.
remote: Total 514 (delta 0), reused 0 (delta 0), pack-reused 514
Receiving objects: 100% (514/514), 393.28 KiB | 282.00 KiB/s, done.
Resolving deltas: 100% (283/283), done.
Checking connectivity... done.
Caminho do sub-módulo 'CakeBrah': confirmado '42ebe0d0bc075ba98fa631441590de9bd2733d2b'
Submodule 'source/libkhax' (git://github.com/Myriachan/libkhax) registered for path 'source/libkhax'
Cloning into 'source/libkhax'...
remote: Counting objects: 115, done.
remote: Total 115 (delta 0), reused 0 (delta 0), pack-reused 115
Receiving objects: 100% (115/115), 74.63 KiB | 0 bytes/s, done.
Resolving deltas: 100% (63/63), done.
Checking connectivity... done.
Caminho do sub-módulo 'CakeBrah/source/libkhax': confirmado 'e9771d8d0b23c4a8f988760b931746a4018fbf97'
Cloning into 'CakeHax'...
remote: Counting objects: 314, done.
remote: Total 314 (delta 0), reused 0 (delta 0), pack-reused 314
Receiving objects: 100% (314/314), 139.31 KiB | 0 bytes/s, done.
Resolving deltas: 100% (170/170), done.
Checking connectivity... done.
Caminho do sub-módulo 'CakeHax': confirmado '6b8fca0b37a370a605f76b34b133da91a0b40f5e'
Submodule 'rop3ds' (https://github.com/dukesrg/rop3ds) registered for path 'rop3ds'
Cloning into 'rop3ds'...
remote: Counting objects: 408, done.
remote: Total 408 (delta 0), reused 0 (delta 0), pack-reused 408
Receiving objects: 100% (408/408), 70.80 KiB | 0 bytes/s, done.
Resolving deltas: 100% (249/249), done.
Checking connectivity... done.
Caminho do sub-módulo 'CakeHax/rop3ds': confirmado 'cbbc255b4182866849f3ea42b54441157be7c41b'

argentlan@ubuntunote:~$ cd AuReiNand

argentlan@ubuntunote:~/AuReiNand$ make
arm-none-eabi-gcc -Wall -Wextra -MMD -MP -marm -mlittle-endian -mcpu=arm946e-s -march=armv5te -fno-builtin -fshort-wchar -std=c11 -Wno-main -O2 -ffast-math -c -mthumb -mthumb-interwork -Wno-unused-function -o build/fatfs/sdmmc/sdmmc.o source/fatfs/sdmmc/sdmmc.c
make: arm-none-eabi-gcc: Comando não encontrado
Makefile:96: recipe for target 'build/fatfs/sdmmc/sdmmc.o' failed
make: *** [build/fatfs/sdmmc/sdmmc.o] Error 127

argentlan@ubuntunote:~/AuReiNand$

To be more specific, add it near the front of your path on Windows. DevkitPro does not like spaces and such in your path so adding it after a 'Program Files (x86)' entry might not help you much.

i'm not in Windows, it's all ok with my PATH, I was compiling fine before that bin2c requiriment update

 

[nooby89]

IDK if it's with the AuReiNAND, but with a9lh, the EUR games dosen't appear, do you have any solution?

 

[Aurora Wright]

Since I'm going to change the combo to load payloads and I'd rather make button changes all at once, do you think start or select are better to call the config menu?