Hacking Luma3DS - Noob-proof 3DS Custom Firmware

[Argentlan]

where can I find bin2c for linux?

 

[Doopl]

No useless menus, please. This should be kept as simple as possible.

Useless? It would save the effort of memorising a bunch of button combinations, which I think would be valuable to a lot of users.

 

[Rohul1997]

where can I find bin2c for linux?

nvm

 

[Aurora Wright]

where can I find bin2c for linux?

Take the .c file and do: cc bin2c.c -o bin2c

 

[Argentlan]

Take the .c file and do: cc bin2c.c -o bin2c

oh Thx!

 

[Supster131]

oh Thx!

Take the .c file and do: cc bin2c.c -o bin2c

What distro do you guys use?
I've been trying to get into using Linux, but 2 distros I used were trash and didn't work.
(Sorry that this is off topic, just wanna ask, since I want to hear some opinions.)

 

[Ifury]

Quick question, how can I update from 3.11 to 3.12 aureinand cfw while in A9LH? It's just like emunand were you just replace the folders, or there is more to it... I am on sysnand 10.7 A9LH. Thx in advance.

 

[EmuAGR]

Quick question, how can I update from 3.11 to 3.12 aureinand cfw while in A9LH? It's just like emunand were you just replace the folders, or there is more to it... I am on sysnand 10.7 A9LH. Thx in advance.

Just replace the files and folders.

 

[Februarysn0w]

Quick question, how can I update from 3.11 to 3.12 aureinand cfw while in A9LH? It's just like emunand were you just replace the folders, or there is more to it... I am on sysnand 10.7 A9LH. Thx in advance.

loader.bin not need! If you use amr9payload put payload folder.

 

[Ifury]

Thx for fast response, highly appreciated.

 

[Deleted User]

So bit confused on the new build. I have updatedsysnand on 10.7, have the UpdatedSysnand and pre-patched firm selected. However holding L/key or L+R/key never boots payloads. Just gives the "no emunand detected" error. Did I miss something? Was working fine on 3.12

 

[EmuAGR]

So bit confused on the new build. I have updatedsysnand on 10.7, have the UpdatedSysnand and pre-patched firm selected. However holding L or L+R/key never boots payloads. Just gives the "no emunand detected" error. Did I miss something? Was working fine on 3.12

That was a test build for some users to try. Stick with 3.12, which is the last official release at the moment.

 

[Deleted User]

That was a test build for some users to try. Stick with 3.12, which is the last official release at the moment.

Oh I'm aware. Apparently everything works except Uncart, but I'm assuming its something to do with backlighting. D9/E9/A9Installer work fine with L+button.

Edit: Yea something with Uncart, if I swap to a screen-init A9LH, I can see it fine. When on a non-screen init, nothing shows up. D9/A9Installer screen init though (tried setting uncart to B and Y, but no dice)

 

[Argentlan]

What distro do you guys use?
I've been trying to get into using Linux, but 2 distros I used were trash and didn't work.
(Sorry that this is off topic, just wanna ask, since I want to hear some opinions.)

I'm on Ubuntu 15.10 but i'm not able to compile anymore for some reason
I have bin2c and lastest armips
@Aurora Wright What am I doing wrong?

Spoiler: Terminal

argentlan@ubuntunote:~$ armips
ARMIPS64 Assembler v0.8.0 (Mar 23 2016 23:17:27) by Kingcom
Usage: armips file.asm [-temp temp.txt] [-sym symfile.sym]

argentlan@ubuntunote:~$ bin2c --version
bin2c: NVIDIA (R) File to C data converter
Copyright (c) 2005-2014 NVIDIA Corporation
Built on Thu_Jul_17_21:41:11_CDT_2014
Cuda compilation tools, release 6.5, V6.5.12


argentlan@ubuntunote:~$ git clone --recursive http://github.com/AuroraWright/AuReiNand.git
Cloning into 'AuReiNand'...
remote: Counting objects: 1062, done.
remote: Compressing objects: 100% (13/13), done.
remote: Total 1062 (delta 6), reused 0 (delta 0), pack-reused 1049
Receiving objects: 100% (1062/1062), 4.55 MiB | 1.14 MiB/s, done.
Resolving deltas: 100% (613/613), done.
Checking connectivity... done.
Submodule 'CakeBrah' (https://github.com/mid-kid/CakeBrah) registered for path 'CakeBrah'
Submodule 'CakeHax' (https://github.com/mid-kid/CakeHax) registered for path 'CakeHax'
Cloning into 'CakeBrah'...
remote: Counting objects: 514, done.
remote: Total 514 (delta 0), reused 0 (delta 0), pack-reused 514
Receiving objects: 100% (514/514), 393.28 KiB | 282.00 KiB/s, done.
Resolving deltas: 100% (283/283), done.
Checking connectivity... done.
Caminho do sub-módulo 'CakeBrah': confirmado '42ebe0d0bc075ba98fa631441590de9bd2733d2b'
Submodule 'source/libkhax' (git://github.com/Myriachan/libkhax) registered for path 'source/libkhax'
Cloning into 'source/libkhax'...
remote: Counting objects: 115, done.
remote: Total 115 (delta 0), reused 0 (delta 0), pack-reused 115
Receiving objects: 100% (115/115), 74.63 KiB | 0 bytes/s, done.
Resolving deltas: 100% (63/63), done.
Checking connectivity... done.
Caminho do sub-módulo 'CakeBrah/source/libkhax': confirmado 'e9771d8d0b23c4a8f988760b931746a4018fbf97'
Cloning into 'CakeHax'...
remote: Counting objects: 314, done.
remote: Total 314 (delta 0), reused 0 (delta 0), pack-reused 314
Receiving objects: 100% (314/314), 139.31 KiB | 0 bytes/s, done.
Resolving deltas: 100% (170/170), done.
Checking connectivity... done.
Caminho do sub-módulo 'CakeHax': confirmado '6b8fca0b37a370a605f76b34b133da91a0b40f5e'
Submodule 'rop3ds' (https://github.com/dukesrg/rop3ds) registered for path 'rop3ds'
Cloning into 'rop3ds'...
remote: Counting objects: 408, done.
remote: Total 408 (delta 0), reused 0 (delta 0), pack-reused 408
Receiving objects: 100% (408/408), 70.80 KiB | 0 bytes/s, done.
Resolving deltas: 100% (249/249), done.
Checking connectivity... done.
Caminho do sub-módulo 'CakeHax/rop3ds': confirmado 'cbbc255b4182866849f3ea42b54441157be7c41b'

argentlan@ubuntunote:~$ cd AuReiNand

argentlan@ubuntunote:~/AuReiNand$ make
arm-none-eabi-gcc -Wall -Wextra -MMD -MP -marm -mlittle-endian -mcpu=arm946e-s -march=armv5te -fno-builtin -fshort-wchar -std=c11 -Wno-main -O2 -ffast-math -c -mthumb -mthumb-interwork -Wno-unused-function -o build/fatfs/sdmmc/sdmmc.o source/fatfs/sdmmc/sdmmc.c
make: arm-none-eabi-gcc: Comando não encontrado
Makefile:96: recipe for target 'build/fatfs/sdmmc/sdmmc.o' failed
make: *** [build/fatfs/sdmmc/sdmmc.o] Error 127

argentlan@ubuntunote:~/AuReiNand$

 

[nwhiteman42]

I formatted to my sd card. I backed it up before hand. I copied the data back over. My 3DS will turn on and then turn off half a second later. Even if i take out the sd card. Is this because it is trying to boot the emunand that is no longer there? If this is true can I have someones config file in the aurei folder that boots straight to Sysnand? Thanks

 

[pbanj]

I formatted to my sd card. I backed it up before hand. I copied the data back over. My 3DS will turn on and then turn off half a second later. Even if i take out the sd card. Is this because it is trying to boot the emunand that is no longer there? If this is true can I have someones config file in the aurei folder that boots straight to Sysnand? Thanks

You could just delete ur config file

 

[matpower]

I formatted to my sd card. I backed it up before hand. I copied the data back over. My 3DS will turn on and then turn off half a second later. Even if i take out the sd card. Is this because it is trying to boot the emunand that is no longer there? If this is true can I have someones config file in the aurei folder that boots straight to Sysnand? Thanks

If it turns half-second later, it isn't reading the A9LH file and it automatically shuts down(Unless the fork that you're using doesn't have it) because of that. How big is your SD? Also if you plan on using your sysNAND as your main NAND, you should transfer it over to sysNAND.
Also try to delete your config like pbanj said.

 

[nwhiteman42]

If it turns half-second later, it isn't reading the A9LH file and it automatically shuts down(Unless the fork that you're using doesn't have it) because of that. How big is your SD? Also if you plan on using your sysNAND as your main NAND, you should transfer it over to sysNAND.
Also try to delete your config like pbanj said.

Deleting config doesn't change anything. I will be transferring everything to my sysnand. My SD card is 64gb. Do you mean arm9loaderhax.bin when you say "A9LH file'?

 

[Gcentrex]

Deleting config doesn't change anything. I will be transferring everything to my sysnand. My SD card is 64gb. Do you mean arm9loaderhax.bin when you say "A9LH file'?

What version are you using?

Current version you hold Select when booting and make sure (Updated sysNAND mode) is ticked then your able to boot directly to sysNAND

 

[matpower]

Deleting config doesn't change anything. I will be transferring everything to my sysnand. My SD card is 64gb. Do you mean arm9loaderhax.bin when you say "A9LH file'?

Yes, well, I guess you formatted it using Windows' built-in tool, right? Well, Windows only allows you to format it to exFAT or NTFS, but the 3DS doesn't recognize those file systems. You'll need a tool like MiniTool Partition Wizard Free to format it in FAT32.
Also don't flash your emuNAND directly into your sysNAND via Decrypt9. Dump the CTRNAND partition, and maybe the TWL-related partitions and flash them instead. Do not mess with the FIRM0/FIRM1 partitions, else you'll lose A9LH.