Hey, I recently ordered some parts to make a NAND mod. It was cheaper to order multiples of the connectors and SD adapters than it was to buy just one. I ordered 20 sets of connectors/cables and 10 SD adapters. Is there any market for "kits" The wires will be presoldered to the female connectors, and a piece of paper that is labeled as to witch pin (GND, Dat0, ect..) each wire needs to be soldered too. The SD adapters would also come presoldered to the male connector. All you would have to do solder 4 pins, and you would not have to worry about getting the connections mixed up, and it would save you the trouble and time of the SD adapter. I would also use a continuity tester to make sure that every connection works, and there is nothing shorting. I could also include a little solder if that would be wanted. I just wanted a little community feedback on the idea. Would anyone be interested in this, and does $10-$15 sound like a good price? Here is a picture as an example: Warning: Spoilers inside!