Installing wads to USB and NAND??

Discussion in 'Wii - Hacking' started by DJlemon, Sep 2, 2010.

Sep 2, 2010
  1. DJlemon
    OP

    Newcomer DJlemon Newbie

    Joined:
    Sep 2, 2010
    Messages:
    3
    Country:
    United States
    Hi Guys

    New here, just some quick background. Wii 4.1E which I have used the Modmii procedure and works a treat, a BIG thanks to Xflak so a donation will be heading his way soon.

    Also a big thanks in advance to anyone that helps me.

    Im new to all this so sorry if I ask something stupid, I have tried to research as much as poss but there is a lot of info out there and just want to make sure I dont balls up my freshly modded Wii. Basically I wish to install some Wads on my USB hdd (Fat32). I have found a program called Wadmanager which apparantly will allow me to do this but it talks ofemulating NAND, now I remember in the process for Modmii I think I made a back up of the NAND and saved it on my PC ( I know that its internal memory where the operating for the wii is I think) but thats all I know about it. Basically I just want to install the wads on my hdd, will emulating the NAND cock anything I have done via the modmii process up? Do I need to emulate it etc. Any pit falls or advice would be greatly welcome.

    Thanks again
     
  2. DJlemon
    OP

    Newcomer DJlemon Newbie

    Joined:
    Sep 2, 2010
    Messages:
    3
    Country:
    United States
    Guys,

    Does no one know, or is it a stupid question or poorly worded?

    ta
     
  3. nIxx

    Member nIxx GBAtemp Maniac

    Joined:
    Sep 30, 2007
    Messages:
    1,459
    Location:
    Germany
    Country:
    Germany
    Well as first you could just have done everything without ModMii (i mean if you want to donate donate at least to the people that original wrote the used applications [​IMG] )

    And about emulating NAND take a look on triiforce it can load VC/Wiiware games from a USB Device or SD [​IMG].
     
  4. Pakatus

    Member Pakatus GBAtemp Advanced Fan

    Joined:
    Apr 13, 2009
    Messages:
    777
    Location:
    Portugal
    Country:
    Portugal
    lol...

    "Basically I just want to install the wads on my hdd, will emulating the NAND cock"

    1 - Get your post right.
    2 - Get Showmiiwads from Leathl
    3 - Extract your nand.bin (you should have done one in the bootmii process)
    4 - Get wads from the games, and extract them to nand on showmiiwads
    5 - Set triiforce_mrc
    6 - Get cIOS249 rev17 on slot 249
    7 - Launch triiforce_mrc
    8 - Play games
    9 - "NAND cock"... lol
     
  5. DJlemon
    OP

    Newcomer DJlemon Newbie

    Joined:
    Sep 2, 2010
    Messages:
    3
    Country:
    United States
    Cheers for your help guys, thanks a lot.
    @Pakatus
    9 - "NAND cock"... lol

    I didnt know what you ment by this, either Im being very thick or you have mis read, after the comma I wrote "will emulating the NAND cock anything I have done via the modmii process up?

    Not the best english in the world granted, but I did use the word 'up' at the end lol, anyways, thanks for the help guys.
     
  6. foolontehill

    Newcomer foolontehill Advanced Member

    Joined:
    Feb 11, 2010
    Messages:
    82
    Location:
    Illinois
    Country:
    United States

    Is your step 6 correct? I can install ciosr17 on slot 149? And triiforce will work?
     
  7. Pakatus

    Member Pakatus GBAtemp Advanced Fan

    Joined:
    Apr 13, 2009
    Messages:
    777
    Location:
    Portugal
    Country:
    Portugal
    ups my bad...249...fixed.
     

Share This Page