I need help with chipset identification and what to buy to start hacking.

Discussion in 'Xbox 360 - Hacking & Homebrew' started by Katanira, Jan 28, 2016.

  1. Katanira
    OP

    Katanira Member

    Newcomer
    38
    1
    Jan 4, 2016
    United States
    Xbox 360 halo 4 slim (320gb)
    2012-09-05
    DVD-drive: 1532-16D5S Lite-On drive (Phillips)
    Dash: 2.0.17150.0

    My question: What version of the Corona Chipset do I have (I believe it's 4 or 5)?
    Another question: I will need a Cr4 XL and will get the QSB. Will I need a 4gb RW kit?

    Please let me know if any other information is needed. Thank you.
     

    Attached Files:



  2. DinohScene

    DinohScene Capture the Dino

    Member
    GBAtemp Patron
    DinohScene is a Patron of GBAtemp and is helping us stay independent!

    Our Patreon
    16,027
    12,544
    Oct 11, 2011
    Antarctica
    В небо
    It's a Corona V3.
    You don't need a 4GB SD R/W kit as it has a standard 16MB NAND.

    CR4XL is needed tho.
    As well as a JRunner programmer and POST fix adapter.
    (I assume those pics are yours so you already have the POST fix adapter)

    You got experience with soldering?
     
  3. Katanira
    OP

    Katanira Member

    Newcomer
    38
    1
    Jan 4, 2016
    United States

    Awesome, thanks. I have already ordered the CR4XL and I have the Jr programmer v2.
    The pics were taken of my 360, yes.
    I have some soldering experience, as well as all the necessary equipment.
     
  4. DinohScene

    DinohScene Capture the Dino

    Member
    GBAtemp Patron
    DinohScene is a Patron of GBAtemp and is helping us stay independent!

    Our Patreon
    16,027
    12,544
    Oct 11, 2011
    Antarctica
    В небо
    Then it shouldn't be to difficult.

    Use this thread to install FSD (once you hacked it)
    Download the latest Dashlaunch from Homebrew-connection.org.
    When the tut says you should get into Dashlaunch, just navigate to a USB containing the freshly downloaded Dashlaunch (install it to your harddrive from the program or copy it from USB)
     
  5. Katanira
    OP

    Katanira Member

    Newcomer
    38
    1
    Jan 4, 2016
    United States
    Thanks for all the help! Now to wait for the CR4XL to arrive.
     
  6. DinohScene

    DinohScene Capture the Dino

    Member
    GBAtemp Patron
    DinohScene is a Patron of GBAtemp and is helping us stay independent!

    Our Patreon
    16,027
    12,544
    Oct 11, 2011
    Antarctica
    В небо
    No prob~
    If there's thing you need help with, just ask~
     
  7. Katanira
    OP

    Katanira Member

    Newcomer
    38
    1
    Jan 4, 2016
    United States
    Will do, thanks.
     
  8. DinohScene

    DinohScene Capture the Dino

    Member
    GBAtemp Patron
    DinohScene is a Patron of GBAtemp and is helping us stay independent!

    Our Patreon
    16,027
    12,544
    Oct 11, 2011
    Antarctica
    В небо
    Welcomes~
    Good luck!
     
  9. Katanira
    OP

    Katanira Member

    Newcomer
    38
    1
    Jan 4, 2016
    United States
    I soldered everything and hooked up the jrunner 2 (and made sure that all the drivers were installed). The cr4 xl's green led flashed once then remains a solid green when the 360 boots up. I tried to dump the nand, but nothing happens. Not a word on screen or anything.
     
    Last edited by Katanira, Feb 5, 2016
  10. Katanira
    OP

    Katanira Member

    Newcomer
    38
    1
    Jan 4, 2016
    United States
    I took everything off and tried a re-solder, so I'll post the pics to see if it's good. I'll need to find another point to solder the 5v wire, because the cap popped off, as well.
     

    Attached Files:

  11. DinohScene

    DinohScene Capture the Dino

    Member
    GBAtemp Patron
    DinohScene is a Patron of GBAtemp and is helping us stay independent!

    Our Patreon
    16,027
    12,544
    Oct 11, 2011
    Antarctica
    В небо
    You need to dump the NAND whilst the 360 is off.
    You risk destroying your JRunner programmer if you keep it connected.
     
  12. Katanira
    OP

    Katanira Member

    Newcomer
    38
    1
    Jan 4, 2016
    United States
    So dump it while off but still plugged in?

    Good to know.
     
    Last edited by Katanira, Feb 5, 2016
  13. DinohScene

    DinohScene Capture the Dino

    Member
    GBAtemp Patron
    DinohScene is a Patron of GBAtemp and is helping us stay independent!

    Our Patreon
    16,027
    12,544
    Oct 11, 2011
    Antarctica
    В небо
    Yes.
    The 360's PSU needs to be connected but the 360 CANNOT be turned on.

    It should auto detect.
     
  14. Katanira
    OP

    Katanira Member

    Newcomer
    38
    1
    Jan 4, 2016
    United States
    Good to know. I hope nothing was fried with my earlier attempts.
     
  15. Katanira
    OP

    Katanira Member

    Newcomer
    38
    1
    Jan 4, 2016
    United States
    Nothing happens, again. Green light for jr v2, and the cr4 xl is being powered. The console is off, I started up jrunner 0.3 beta (8). I tried to read nand, and it gave me a "choose type". I put in Corona and nothing. (I discovered my dashboard is 17489.)
     
  16. Katanira
    OP

    Katanira Member

    Newcomer
    38
    1
    Jan 4, 2016
    United States
    Here are some pics.
     

    Attached Files:

  17. DinohScene

    DinohScene Capture the Dino

    Member
    GBAtemp Patron
    DinohScene is a Patron of GBAtemp and is helping us stay independent!

    Our Patreon
    16,027
    12,544
    Oct 11, 2011
    Antarctica
    В небо
    Remove the CR4 chip and the JRProgrammer.
    See if the console still boots.
     
  18. n00b2015

    n00b2015 GBAtemp Regular

    Member
    249
    37
    Oct 19, 2015
    Slovenia
    where can i buy r-jtag ultimate kit? in Europe please.
     
  19. Katanira
    OP

    Katanira Member

    Newcomer
    38
    1
    Jan 4, 2016
    United States
    The console still boots fine.
     
  20. n00b2015

    n00b2015 GBAtemp Regular

    Member
    249
    37
    Oct 19, 2015
    Slovenia
    nvm i found it.