Hacking Question I inject the payload, the TegraRcmGUI says is was successful and all I get is a black screen

LucasRibP

New Member
OP
Newbie
Joined
Jan 28, 2021
Messages
3
Trophies
0
Age
22
XP
25
Country
Brazil
Exactly what is in the title

The log says:
No RCM device detected
RCM Device detected
Invoking TegraRcmSmash.exe with args : "C:\Users\lrpes\Downloads\hekate_ctcaer_5.5.3.bin"
TegraRcmSmash (32bit) 1.2.1-3 by rajkosto
Opened USB device path \?\usb#vid_0955&pid_7321#5&2849dbb0&0&3#{aa0dbd45-3117-f331-5c49-76bf65225042}
RCM Device with id 40830318000000084116446401101062 initialized successfully!
Uploading payload (mezzo size: 92, user size: 110598, total size: 176814, total padded size: 180224)...
Switched to high buffer
Smashing the stack!
Smashed the stack with a 0x0000 byte SETUP request!
Payload successfully injected

I searched for a video of someone doing the full process and the only different thing that happened up to that point was the fact that the time it took for the TegraRcmGUI to inject the payload on my switch was extremely fast.

I suppose the switch is unpatched, as it was able to receive the payload

The firmware is on the latest version (11.0.1 as of creating this thread)

I already tried erasing the files and putting them on the MicroSD again.
I already tried formatting the microSD as Fat32 and as exFat (I have been using this MicroSD as exFat ever since I bought the console)
Tried to push the payload using 3 different USB cables, 2 from USB A to C, 1 from C to C.
Everything had the same result.

I don't know what to try now and all the threads I found with similar problems had no solutions. If anyone can give me a hand, I would be really grateful!
 

Lacius

Well-Known Member
Member
Joined
May 11, 2008
Messages
17,280
Trophies
2
XP
16,497
Country
United States
Exactly what is in the title

The log says:
No RCM device detected
RCM Device detected
Invoking TegraRcmSmash.exe with args : "C:\Users\lrpes\Downloads\hekate_ctcaer_5.5.3.bin"
TegraRcmSmash (32bit) 1.2.1-3 by rajkosto
Opened USB device path \?\usb#vid_0955&pid_7321#5&2849dbb0&0&3#{aa0dbd45-3117-f331-5c49-76bf65225042}
RCM Device with id 40830318000000084116446401101062 initialized successfully!
Uploading payload (mezzo size: 92, user size: 110598, total size: 176814, total padded size: 180224)...
Switched to high buffer
Smashing the stack!
Smashed the stack with a 0x0000 byte SETUP request!
Payload successfully injected

I searched for a video of someone doing the full process and the only different thing that happened up to that point was the fact that the time it took for the TegraRcmGUI to inject the payload on my switch was extremely fast.

I suppose the switch is unpatched, as it was able to receive the payload

The firmware is on the latest version (11.0.1 as of creating this thread)

I already tried erasing the files and putting them on the MicroSD again.
I already tried formatting the microSD as Fat32 and as exFat (I have been using this MicroSD as exFat ever since I bought the console)
Tried to push the payload using 3 different USB cables, 2 from USB A to C, 1 from C to C.
Everything had the same result.

I don't know what to try now and all the threads I found with similar problems had no solutions. If anyone can give me a hand, I would be really grateful!
What's your serial number, and what payload are you sending?
 
General chit-chat
Help Users
    Psionic Roshambo @ Psionic Roshambo: I have these giant bruises on my arms right now they hurt... Lady at the plasma place tore my...