Hacking how to softmod nintendo wii black need help.

Duke Shirehill

Active Member
OP
Newcomer
Joined
Jan 23, 2015
Messages
31
Trophies
0
Age
43
XP
73
Country
how to softmod nintendo wii black need help.
have searched the web for a good instruction tuturiol and good program, but it seems were as many as there are users. so want someone omniscient guru. for wii black. can show how to do and where to find programs, links to downloading page.
wii black have motion + control, and I can not find an Old
Feel free to add programs needed if I missed some important for my goal.

hold discussion to a minimum so it does not clutter as in many other threads

the only way is to use a white control without motion +. and use this program or newer ModMii6.3.1 and USB Loder gx
and follow the wizard
  • Your chosen options

This guide was generated using the following parameters:
  • Install and\or update all recommended softmods
  • Current System Menu is 4.3E
  • Desired System Menu is 4.3E
  • Update active IOSs (can be disabled in options)
  • Do not Install a cMIOS (can be enabled in options)
  • Install a USB-Loader Forwarder Channel (can be disabled in options)
  • External Hard Drive to be Formatted as FAT32
  • Download Configurable USB-Loader and WiiFlow
  • USB-Loader Settings and config files saved to USB Hard Drive

  • Important Notes

  • This guide does NOT require a Wifi connection on your Wii.
  • An SD card formatted to FAT32 required (best results are with SD cards, SDHC cards will only work on System Menu's 4.0 or above).
  • If you get errors during any of the steps reformat your SD card as FAT or FAT32
  • Turn off WiiConnect24 and take out all gamecube memory cards/controllers when modding the Wii (unless instructed otherwise).
  • If your Wii ever freezes, hold the power button on the Wii for 5 seconds to power it off then try again.
  • Don’t ever accept a new Nintendo update without first googling to see if it’s safe. The last update (to 4.3) was released in late June 2010. If you accept an official Nintendo update after modding the Wii, you may lose some or all of your modifications.
  • Never uninstall a system menu or IOS.
  • Do not install untested WADs/themes without Bootmii or Priiloader installed.
  • This custom guide is great start, but Wii modding is always evolving. Check for updates online, and remember, google is your friend.
  • Not all external hard drive's are compatible with the Wii, for a list of which USB hard drive's are compatible, see this webpage:http://wiki.gbatemp.net/wiki/USB_Devices_Compatibility_List
  • If you have questions, a more detailed guide can be found at www.sites.google.com/site/completesg/

  • Hacking your Wii


  • Installing The Homebrew Channel (HBC) and Bootmii


Note:

    1. if this Wii was previously modified, and it has either the HBC, BootMii as Boot2, or a Forwarder Channel installed, you can use that instead of an exploit.



    1. If using BootMii as Boot2 to install the HBC, turn on your Wii with the SD Card inserted and BootMii will load. Go To the SD menu and load bootmini.elf. This will load the Hackmii Installer allowing you to reinstall the HBC.



    1. If using a Forwarder Channel, just save the boot.elf/dol from the app you want to load (ie. SD:\apps\hackmii_installer\boot.elf or SD:\apps\MMM\boot.dol) to the location used by your
specific

    1. Forwarder Channel (ie. SD:\apps\usbloader\boot.dol). Then start the channel and the Hackmii Installer will load allowing you to reinstall the HBC. Note, if your forwarder channel only loads dol's and not elf's, launch MMM's boot.dol, then use its "App Manager" to load the Hackmii Installer.


Wilbrand
Wilbrand.gif


    1. Requirements: an SD or SDHC card


    1. Go to the "Messageboard" on your Wii and navigate to Yesterday. Click on the envelope with the pink Bomb icon.


HackMii.gif


    1. This runs the Hackmii Installer. Use the installer to install the Homebrew Channel (HBC) and Bootmii as IOS and Bootmii as Boot2 (if possible).

Note:

    1. If you get a "no vulnerable IOS" error message, run ModMii again and this time select the "Hackmii Solutions" option and follow the new instructions before continuing this guide.



  • Making a NAND backup

NANDBackup.gif


    1. While inside the Homebrew Channel, load BootMii by pressing home and clicking Launch Bootmii.


    1. Press the power button on the Wii 3 times to get to the last option, then press the reset button (you can also navigate with a Gamecube controller).


    1. Press reset to choose the first option, then follow the directions on the screen to make your NAND backup (bad blocks are no problem).


    1. Backup the Bootmii folder, nand.bin, and keys.bin elsewhere and erase from the SD card (or rename it). You'll need these in case of emergencies, so don't lose them.


    1. Go back to The Homebrew Channel.

Note:

    1. if Bootmii was installed as boot2, then it will show up as soon as the Wii is turned on AS LONG AS it finds the bootmii folder (mentioned above) on the root of the SD card.



  • Install a patched IOS236



    1. Start the Homebrew Channel.


VERY IMPORTANT!

    1. In the Homebrew channel, if you do not have a working internet connection already set up, you will see an icon flashing in the bottom right corner of the screen indicating its inability to initialize the network. You should wait for the icon to stop flashing OR let it flash for 30-60 seconds before proceeding otherwise these apps may error shortly after being launched. If you encounter this harmless error, power off the Wii and repeat this step from the beginning. To increase your chances of success, add a working internet connection to your Wii via the official Wii Settings Menu, but be sure to say "No" when asked to perform an update.



    1. You only need to perform ONE of the below methods.


    1. Once either method successfully installs IOS236, you can move onto the next step.


      • Method A: Using IOS236 Installer

IOS236Installer.gif


      • After waiting 30-60 seconds for the HBC to attempt to initialize the network, launch "IOS236 Installer v5 MOD".

Note:

      • This app must be launched using HBC v1.0.7 or higher in order to work properly.


      • It should say "IOS236 installation is complete!" and return to The Homebrew Channel.



      • If you experience errors, keep trying and it should eventually work.


      • If you continue to experience errors you can try using Simple IOS Patcher instead.


      • Method B: Using Simple IOS Patcher

SimpleIOSPatcher.gif


      • After waiting 30-60 seconds for the HBC to attempt to initialize the network, launch "Simple IOS Patcher".

Note:

      • This app must be launched using HBC v1.0.7 or higher in order to work properly.


      • Choose "IOS36" (already selected by default) and push A, then select "Install IOS to slot" and choose 236. Select "Install patched IOS36" leaving the 4 patches set to "yes" and press A, then choose "Load IOS from SD card". Confirm your choice with the A button and, when prompted, push A to continue the installation. When the installation is finished press the B button to exit the Main Menu.



      • If you experience errors, keep trying and it should eventually work.


      • If you continue to experience errors you can try using IOS236 Installer instead.


  • Install Priiloader

Priiloader.gif


    1. Launch "Priiloader 236 Mod" via the Homebrew Channel


    1. After the Priiloader Installer loads, press + to install it.


    1. After successfully installing Priiloader, access it by powering off the Wii, then powering it back on while holding reset until you see the Priiloader menu.


    1. You should install some system menu hacks now (by going to System Menu hacks option).


RECOMMENDED HACKS
      • Block Disc Updates
      • Block Online Updates
      • Replace Health Screen
      • Move Disc Channel


    1. The priiloader menu is white by default, you can change it to black in the Priiloader settings if you prefer.



    1. One of the special functions of Priiloader is that it can autoboot any app/file instead of the system menu. Some apps (like crazyIntro) can't be used without it.


    1. For details on how to do so, visit
www.sites.google.com/site/completesg/system-hacks/priiloader


  • Install WADs

WADs.gif


    1. Load Multi-Mod Manager (MMM) via the HomeBrew Channel.


    1. If IOS236 is not already loaded, select "Load another IOS", then select IOS236

Note:

    1. If this step fails with error -ret 2011 or other, you may need to retry patching IOS236. If the Wii was previously softmodded, you can try loading cIOS250 (or others like 202,222,223,224,236,249)



    1. In Multi-Mod Manager's main menu, go down to select "WAD Manager".


    1. Install the following WADs from the WAD folder (this list of WADs is unique to the information you provided ModMii).


    1. Be careful not to install any additional WADs that may have been previously saved in this folder (they may be safe, but I cannot say for sure).



    1. Mark each of the following WADs for installation by navigating to each WAD and hitting "+"


    1. Alternatively, you can hold "+" for 2 seconds to select all the WADs in the folder.


    1. After you've marked all the WADs listed below, press 'A' twice to install them.



    1. If any files fail to install properly, they will remain marked for installation, so just retry installing those files.


Your unique list of WADs to install are as follows:
      • IOS11v16174(IOS60v6174[FS-ES-NP-VP-DIP])
      • IOS20v16174(IOS60v6174[FS-ES-NP-VP-DIP])
      • IOS30v16174(IOS60v6174[FS-ES-NP-VP-DIP])
      • IOS40v16174(IOS60v6174[FS-ES-NP-VP-DIP])
      • IOS50v16174(IOS60v6174[FS-ES-NP-VP-DIP])
      • IOS52v16174(IOS60v6174[FS-ES-NP-VP-DIP])
      • IOS60v16174(IOS60v6174[FS-ES-NP-VP-DIP])
      • IOS70v16174(IOS60v6174[FS-ES-NP-VP-DIP])
      • IOS80v16174(IOS60v6174[FS-ES-NP-VP-DIP])
      • cIOS202[60]-v5.1R
      • cIOS222[38]-v4
      • cIOS223[37-38]-v4
      • cIOS224[57]-v5.1R
      • cIOS249[56]-d2x-v8-final
      • cIOS250[57]-d2x-v8-final
      • RVL-mios-v10
      • IOS9-64-v1034
      • IOS12-64-v526
      • IOS13-64-v1032
      • IOS14-64-v1032
      • IOS15-64-v1032
      • IOS17-64-v1032
      • IOS21-64-v1039
      • IOS22-64-v1294
      • IOS28-64-v1807
      • IOS31-64-v3608
      • IOS33-64-v3608
      • IOS34-64-v3608
      • IOS35-64-v3608
      • IOS36-64-v3608
      • IOS37-64-v5663
      • IOS38-64-v4124
      • IOS41-64-v3607
      • IOS43-64-v3607
      • IOS45-64-v3607
      • IOS46-64-v3607
      • IOS48-64-v4124
      • IOS53-64-v5663
      • IOS55-64-v5663
      • IOS56-64-v5662
      • IOS57-64-v5919
      • IOS58-64-v6176
      • IOS61-64-v5662
      • IOS62-64-v6430
      • USBLoader(s)-ahbprot58-SD-USB-v11b-IDCL


    1. The above underlined forwarder channel will load the first file it finds from the following list:

      • SD+USB:\apps\usbloader\boot.dol
      • SD+USB:\apps\usbloader\boot.elf
      • SD+USB:\apps\usb-loader\boot.dol
      • SD+USB:\apps\usb-loader\boot.elf
      • SD+USB:\apps\usbloader_cfg\boot.dol
      • SD+USB:\apps\usbloader_cfg\boot.elf
      • SD+USB:\apps\WiiFlow\boot.dol
      • SD+USB:\apps\WiiFlow\boot.elf
      • SD+USB:\apps\usbloader_gx\boot.dol
      • SD+USB:\apps\usbloader_gx\boot.elf

Note:

    1. IOS58 is required for the forwarder to launch apps from an SD Card and hard drives formatted as FAT32, NTFS, ext2, ext3 and ext4. It also supports meta.xml arguments and is able to launch apps with direct hardware access.



  • Reinstall the Homebrew Channel (if applicable)

HBCIOS.gif



    1. In the HomeBrew Channel, hit the "home" button. In the top right corner you will see the IOS used by the HBC.


    1. If the HBC is using IOS58 and your HBC is not upside-down, you can skip this step.



    1. If the HBC is not using IOS58 or it is upside-down, you should continue with this step to reinstall it.


ReinstallHBC.gif


    1. Launch the HackMii_Installer via the HBC.


    1. Use the Hackmii Installer to fix/re-install the HBC (using IOS58). Once you've successfully reinstalled the HBC, you can move onto the next step of the guide.


    1. If the HBC is failing to load the HackMii_Installer (just blackscreens), instead launch the Hackmii Installer using the method described in the first Step.


  • USB Loader and Hard Drive setup

The rest of the guide is performed on your computer in order to set up your USB-Loader

  • Partition and Format the External Hard Drive for FAT32

Partition.gif


    1. First check if your drive needs to be formatted by checking the current Format\File-System of the drive.


    1. Open "My Computer", right-click the external hard drive you want to use, then select "properties".


    1. Make note of the Drive Letter of the external hard drive as this will be important later.


    1. If the "File-System" is already FAT32, you can skip this step.



    1. If you have anything saved on the hard drive, you should back it up now as all the data will be lost once you format it.


FAT32.gif


    1. Launch FAT32 GUI Formatter from shortcuts on your Start Menu or Desktop



    1. Make sure you select the drive letter corresponding to your external hard drive.


    1. You may optionally uncheck the "Quick Format" box, then click start.



  • Copy Files to the Hard Drive


    1. Copy everything inside the C:\Users\Shiressen\Desktop\ud folder to the root of your FAT32 hard-drive\partition.



  • Manage Wii backups using Wii Backup Manager (optional)


    1. Launch WiiBackupManager from shortcuts on your Start Menu or Desktop


    1. You can use this program to manage/transfer your electronic backups of Wii Games.


    1. It is very simple to use, but a detailed tutorial on using Wii Backup Manager can be found here:
www.sites.google.com/site/completesg/backup-launchers/iso/wbfs-managers/wii-backup-manager

Note:

    1. Original Wii Discs cannot be read/copied using a computer (unless you have one of the rare LG Drives that is capable of doing so).


    1. To copy
original

    1. Wii Disc's, insert the disc into your Wii and Launch Configurable USB-Loader, and hit the plus sign "+".


    1. To copy
original

    1. Wii Disc's, insert the disc into your Wii and Launch WiiFlow, go to page 2 of WiiFlow's Settings and select "Install", then select "Go".



  • Configure/Customize Configurable USB-Loader (optional)


    1. To Configure/Customize your USB-Loader, use the Configurator for Configurable USB-Loader found here: C:\Users\Shiressen\Desktop\ud\usb-loader\CfgLoaderConfigurator.exe


    1. Optional: additional themes can be found here:
http://wii.spiffy360.com/themes.php

Important notes on default settings:

    1. Two potentially dangerous features have been locked:

      • The ability to remove/delete games
      • The ability to format a hard drive
      To unlock these features, while in the configurable USB-Loader menu, hold "1" for 5 seconds, then enter the password to unlock these features. The password is "AAAA", you can change the password/settings by using the Configurator for Configurable USB-Loader. Hold "1" again for 5 seconds to lock the USB-Loader again (or it will lock automatically again once you exit the USB-Loader).


  • After modding your Wii

After you are done modding your Wii, you can optionally delete any unnecesarry files by using ModMii's "File Cleanup" Feature.

If you used Bannerbomb and choose not to use the File Cleanup feature, in order to avoid having your Wii freeze when accessing the SD Card Menu, you should delete the "aktn" folder where bannerbomb is saved (SD:\private\wii\title\aktn), or rename the entire "private" folder.

At this point you're practically done.
Now you should be downloading the latest homebrew applications and setting them up on your SD Card (or FAT32 USB Hard Drive) so they can be launched via the HBC.

For playing your backups off a USB hard drive, run the USB-Loader Setup feature from ModMii's Main Menu.

For downloading applications, you should:
  • Check out ModMii's batch download pages as it has many popular apps available for download.
  • Download Homebrew Browser via ModMii to get many popular apps, but this is an online only Wii application.
  • For those without internet on their Wii, check out this list of Homebrew applications.
Another great resource is webrewwii.blogspot.com

After getting whatever apps you want, you should get a boot.dol file and possibly a icon.png and meta.xml.
For HBC to read your SD/USB correctly, your card must be structured SD:/apps/application name/boot.dol
If you have a *.dol not named boot.dol, rename it boot.dol, otherwise it will not be recognized by the HBC.
(optional: the icon.png and meta.xml should be saved in the same place as the boot.dol)

  • Credits, Supporting Apps, and Sources

ModMii was written entirely by me, XFlak; however, without the help of many other very talented people ModMii would not exist.
Some people have contributed supporting files or programs, others have shared their knowledge, some have provided ideas and others have given their time.
I have tried my best to recognize everyone's contribution to ModMii regardless of how big or small it is. If I've forgotten someone, please notify me and I'll add them to the credits as quickly as possible.
 

Duke Shirehill

Active Member
OP
Newcomer
Joined
Jan 23, 2015
Messages
31
Trophies
0
Age
43
XP
73
Country
Are you using a Wii Remote not made by Nintendo? Seems unlikely to be a problem, but I suppose we can't rule out the chance some aren't 100% homebrew compatible.


yes totally secure. it is the original controller to the black wii
i gladly takes suggestions on programs that work for others. with a link to the program
 

Duke Shirehill

Active Member
OP
Newcomer
Joined
Jan 23, 2015
Messages
31
Trophies
0
Age
43
XP
73
Country
I still can not get usb Loder GX to find HDD or USB stick.
what I have done now.
installed The Homebrew Channel (HBC)
installed Bootmii
installed Install a patched IOS236
installed Priiloader

tried installe Multi-Mod Manager (MMM) , but controlen shuts off. it asks for another ios current iso 236 (v65535)
tried installe YAWMM but controlen shuts off.
it asks for ios 249, ( or it says , select the iOS version to use ios 249) will install it installe it If i have a white controller, or do i install it myself if so, where can I find a safe download of it, and how do i installe It and the best to do it .

My USB Loader GX can not find the hard drive, have been trying all the suggestions here on the forum . is there someone who is intiligent enough to resolve this.
it's a dell disk that is formatted to FAT32 and have used WiiBackupManager_Win32 and put some games on it in iso format


I have now read and been looking for about 50 hours,

I have a black wii with motion + Control

This is my SysCheckHDE

SysCheck v2.3.2 HacksDen Edition by JoostinOnline, Double_A, R2-D2199, and Nano
...runs on vIOS58 (rev 6432).

Region: PAL
System Menu 4.3E (v514)
Priiloader installed
Drive date: 12.18.2008
Homebrew Channel 1.1.2 running on IOS58

Hollywood v0x21
Console ID: 159058837
Console Type: Wii
Shop Channel Country: Sweden (107)
Boot2 v5
Found 91 titles.
Found 48 IOS on this console. 17 of them are stub.

IOS3 (rev 65280): Stub
IOS4 (rev 65280): Stub
IOS9 (rev 1290): No Patches
IOS10 (rev 768): Stub
IOS11 (rev 256): Stub
IOS12 (rev 782): No Patches
IOS13 (rev 1288): No Patches
IOS14 (rev 1288): No Patches
IOS15 (rev 1288): No Patches
IOS16 (rev 512): Stub
IOS17 (rev 1288): No Patches
IOS20 (rev 256): Stub
IOS21 (rev 1295): No Patches
IOS22 (rev 1550): No Patches
IOS28 (rev 2063): No Patches
IOS30 (rev 2816): Stub
IOS31 (rev 3864): No Patches
IOS33 (rev 3864): No Patches
IOS34 (rev 3864): No Patches
IOS35 (rev 3864): No Patches
IOS36 (rev 3864): No Patches
IOS37 (rev 5919): No Patches
IOS38 (rev 4380): No Patches
IOS40 (rev 3072): Stub
IOS41 (rev 3863): No Patches
IOS43 (rev 3863): No Patches
IOS45 (rev 3863): No Patches
IOS46 (rev 3863): No Patches
IOS48 (rev 4380): No Patches
IOS50 (rev 5120): Stub
IOS51 (rev 4864): Stub
IOS52 (rev 5888): Stub
IOS53 (rev 5919): No Patches
IOS55 (rev 5919): No Patches
IOS56 (rev 5918): No Patches
IOS57 (rev 6175): No Patches
IOS58 (rev 6432): USB 2.0
IOS60 (rev 6400): Stub
IOS61 (rev 5918): No Patches
IOS62 (rev 6430): No Patches
IOS70 (rev 6912): Stub
IOS80 (rev 7200): No Patches
IOS222 (rev 65280): Stub
IOS223 (rev 65280): Stub
IOS236[36] (rev 65535, Info: rev 3351): Trucha Bug, ES Identify, NAND Access
IOS249 (rev 65280): Stub
IOS250 (rev 65280): Stub
IOS254 (rev 65281): BootMii
BC v6
MIOS v10
Report generated on 02/19/2012.
 

jonthedit

Well-Known Member
Member
Joined
May 30, 2011
Messages
1,682
Trophies
0
XP
1,009
Country
Bangladesh
The problem is just the Wii Mote is not the RVL-001 version.
I checked your sysCheck. Not related to your issue, though you are missing 42 cIOS that you could use to have optimal experience.
PM me if you want a personalized pack [ ill show you where to go ]
or just use ModMii

Edit: your USB loaders will not work until you update your cIOS. I sent you a PM explaining.
 

Duke Shirehill

Active Member
OP
Newcomer
Joined
Jan 23, 2015
Messages
31
Trophies
0
Age
43
XP
73
Country
The problem is just the Wii Mote is not the RVL-001 version.
I checked your sysCheck. Not related to your issue, though you are missing 42 cIOS that you could use to have optimal experience.
PM me if you want a personalized pack [ ill show you where to go ]
or just use ModMii

Edit: your USB loaders will not work until you update your cIOS. I sent you a PM explaining.



I looked at your wad pack, it contained the same as in my pack, except that I had 2 more.
the problem is that there seems to be no way to instal Multi-Mod Manager (MMM),
or YAWMM with motion + controler .. but only with the Old controler.


it should surely not bee so hard to get the drivers in a letter bomb in a usb Loder package with auto loding propertys .
 

jonthedit

Well-Known Member
Member
Joined
May 30, 2011
Messages
1,682
Trophies
0
XP
1,009
Country
Bangladesh
I looked at your wad pack, it contained the same as in my pack, except that I had 2 more.
the problem is that there seems to be no way to instal Multi-Mod Manager (MMM),
or YAWMM with motion + controler .. but only with the Old controler.


it should surely not bee so hard to get the drivers in a letter bomb in a usb Loder package with auto loding propertys .

Hmm... Any way you can use a GC controller?
 

Duke Shirehill

Active Member
OP
Newcomer
Joined
Jan 23, 2015
Messages
31
Trophies
0
Age
43
XP
73
Country
the only way is to use a white control without motion +. and use this program or newer ModMii6.3.1 and USB Loder gx
and follow the wizard
  • Your chosen options

This guide was generated using the following parameters:
  • Install and\or update all recommended softmods
  • Current System Menu is 4.3E
  • Desired System Menu is 4.3E
  • Update active IOSs (can be disabled in options)
  • Do not Install a cMIOS (can be enabled in options)
  • Install a USB-Loader Forwarder Channel (can be disabled in options)
  • External Hard Drive to be Formatted as FAT32
  • Download Configurable USB-Loader and WiiFlow
  • USB-Loader Settings and config files saved to USB Hard Drive

  • Important Notes

  • This guide does NOT require a Wifi connection on your Wii.
  • An SD card formatted to FAT32 required (best results are with SD cards, SDHC cards will only work on System Menu's 4.0 or above).
  • If you get errors during any of the steps reformat your SD card as FAT or FAT32
  • Turn off WiiConnect24 and take out all gamecube memory cards/controllers when modding the Wii (unless instructed otherwise).
  • If your Wii ever freezes, hold the power button on the Wii for 5 seconds to power it off then try again.
  • Don’t ever accept a new Nintendo update without first googling to see if it’s safe. The last update (to 4.3) was released in late June 2010. If you accept an official Nintendo update after modding the Wii, you may lose some or all of your modifications.
  • Never uninstall a system menu or IOS.
  • Do not install untested WADs/themes without Bootmii or Priiloader installed.
  • This custom guide is great start, but Wii modding is always evolving. Check for updates online, and remember, google is your friend.
  • Not all external hard drive's are compatible with the Wii, for a list of which USB hard drive's are compatible, see this webpage: http://wiki.gbatemp.net/wiki/USB_Devices_Compatibility_List
  • If you have questions, a more detailed guide can be found at www.sites.google.com/site/completesg/

  • Hacking your Wii


  • Installing The Homebrew Channel (HBC) and Bootmii

Note:

    1. if this Wii was previously modified, and it has either the HBC, BootMii as Boot2, or a Forwarder Channel installed, you can use that instead of an exploit.



    1. If using BootMii as Boot2 to install the HBC, turn on your Wii with the SD Card inserted and BootMii will load. Go To the SD menu and load bootmini.elf. This will load the Hackmii Installer allowing you to reinstall the HBC.



    1. If using a Forwarder Channel, just save the boot.elf/dol from the app you want to load (ie. SD:\apps\hackmii_installer\boot.elf or SD:\apps\MMM\boot.dol) to the location used by your
specific

    1. Forwarder Channel (ie. SD:\apps\usbloader\boot.dol). Then start the channel and the Hackmii Installer will load allowing you to reinstall the HBC. Note, if your forwarder channel only loads dol's and not elf's, launch MMM's boot.dol, then use its "App Manager" to load the Hackmii Installer.


Wilbrand
Wilbrand.gif


    1. Requirements: an SD or SDHC card


    1. Go to the "Messageboard" on your Wii and navigate to Yesterday. Click on the envelope with the pink Bomb icon.


HackMii.gif


    1. This runs the Hackmii Installer. Use the installer to install the Homebrew Channel (HBC) and Bootmii as IOS and Bootmii as Boot2 (if possible).

Note:

    1. If you get a "no vulnerable IOS" error message, run ModMii again and this time select the "Hackmii Solutions" option and follow the new instructions before continuing this guide.



  • Making a NAND backup
NANDBackup.gif


    1. While inside the Homebrew Channel, load BootMii by pressing home and clicking Launch Bootmii.


    1. Press the power button on the Wii 3 times to get to the last option, then press the reset button (you can also navigate with a Gamecube controller).


    1. Press reset to choose the first option, then follow the directions on the screen to make your NAND backup (bad blocks are no problem).


    1. Backup the Bootmii folder, nand.bin, and keys.bin elsewhere and erase from the SD card (or rename it). You'll need these in case of emergencies, so don't lose them.


    1. Go back to The Homebrew Channel.

Note:

    1. if Bootmii was installed as boot2, then it will show up as soon as the Wii is turned on AS LONG AS it finds the bootmii folder (mentioned above) on the root of the SD card.



  • Install a patched IOS236


    1. Start the Homebrew Channel.


VERY IMPORTANT!

    1. In the Homebrew channel, if you do not have a working internet connection already set up, you will see an icon flashing in the bottom right corner of the screen indicating its inability to initialize the network. You should wait for the icon to stop flashing OR let it flash for 30-60 seconds before proceeding otherwise these apps may error shortly after being launched. If you encounter this harmless error, power off the Wii and repeat this step from the beginning. To increase your chances of success, add a working internet connection to your Wii via the official Wii Settings Menu, but be sure to say "No" when asked to perform an update.



    1. You only need to perform ONE of the below methods.


    1. Once either method successfully installs IOS236, you can move onto the next step.


      • Method A: Using IOS236 Installer

IOS236Installer.gif


      • After waiting 30-60 seconds for the HBC to attempt to initialize the network, launch "IOS236 Installer v5 MOD".

Note:

      • This app must be launched using HBC v1.0.7 or higher in order to work properly.


      • It should say "IOS236 installation is complete!" and return to The Homebrew Channel.



      • If you experience errors, keep trying and it should eventually work.


      • If you continue to experience errors you can try using Simple IOS Patcher instead.


      • Method B: Using Simple IOS Patcher

SimpleIOSPatcher.gif


      • After waiting 30-60 seconds for the HBC to attempt to initialize the network, launch "Simple IOS Patcher".

Note:

      • This app must be launched using HBC v1.0.7 or higher in order to work properly.


      • Choose "IOS36" (already selected by default) and push A, then select "Install IOS to slot" and choose 236. Select "Install patched IOS36" leaving the 4 patches set to "yes" and press A, then choose "Load IOS from SD card". Confirm your choice with the A button and, when prompted, push A to continue the installation. When the installation is finished press the B button to exit the Main Menu.



      • If you experience errors, keep trying and it should eventually work.


      • If you continue to experience errors you can try using IOS236 Installer instead.


  • Install Priiloader
Priiloader.gif


    1. Launch "Priiloader 236 Mod" via the Homebrew Channel


    1. After the Priiloader Installer loads, press + to install it.


    1. After successfully installing Priiloader, access it by powering off the Wii, then powering it back on while holding reset until you see the Priiloader menu.


    1. You should install some system menu hacks now (by going to System Menu hacks option).


RECOMMENDED HACKS
      • Block Disc Updates
      • Block Online Updates
      • Replace Health Screen
      • Move Disc Channel


    1. The priiloader menu is white by default, you can change it to black in the Priiloader settings if you prefer.



    1. One of the special functions of Priiloader is that it can autoboot any app/file instead of the system menu. Some apps (like crazyIntro) can't be used without it.


    1. For details on how to do so, visit
www.sites.google.com/site/completesg/system-hacks/priiloader


  • Install WADs
WADs.gif


    1. Load Multi-Mod Manager (MMM) via the HomeBrew Channel.


    1. If IOS236 is not already loaded, select "Load another IOS", then select IOS236

Note:

    1. If this step fails with error -ret 2011 or other, you may need to retry patching IOS236. If the Wii was previously softmodded, you can try loading cIOS250 (or others like 202,222,223,224,236,249)



    1. In Multi-Mod Manager's main menu, go down to select "WAD Manager".


    1. Install the following WADs from the WAD folder (this list of WADs is unique to the information you provided ModMii).


    1. Be careful not to install any additional WADs that may have been previously saved in this folder (they may be safe, but I cannot say for sure).



    1. Mark each of the following WADs for installation by navigating to each WAD and hitting "+"


    1. Alternatively, you can hold "+" for 2 seconds to select all the WADs in the folder.


    1. After you've marked all the WADs listed below, press 'A' twice to install them.



    1. If any files fail to install properly, they will remain marked for installation, so just retry installing those files.


Your unique list of WADs to install are as follows:
      • IOS11v16174(IOS60v6174[FS-ES-NP-VP-DIP])
      • IOS20v16174(IOS60v6174[FS-ES-NP-VP-DIP])
      • IOS30v16174(IOS60v6174[FS-ES-NP-VP-DIP])
      • IOS40v16174(IOS60v6174[FS-ES-NP-VP-DIP])
      • IOS50v16174(IOS60v6174[FS-ES-NP-VP-DIP])
      • IOS52v16174(IOS60v6174[FS-ES-NP-VP-DIP])
      • IOS60v16174(IOS60v6174[FS-ES-NP-VP-DIP])
      • IOS70v16174(IOS60v6174[FS-ES-NP-VP-DIP])
      • IOS80v16174(IOS60v6174[FS-ES-NP-VP-DIP])
      • cIOS202[60]-v5.1R
      • cIOS222[38]-v4
      • cIOS223[37-38]-v4
      • cIOS224[57]-v5.1R
      • cIOS249[56]-d2x-v8-final
      • cIOS250[57]-d2x-v8-final
      • RVL-mios-v10
      • IOS9-64-v1034
      • IOS12-64-v526
      • IOS13-64-v1032
      • IOS14-64-v1032
      • IOS15-64-v1032
      • IOS17-64-v1032
      • IOS21-64-v1039
      • IOS22-64-v1294
      • IOS28-64-v1807
      • IOS31-64-v3608
      • IOS33-64-v3608
      • IOS34-64-v3608
      • IOS35-64-v3608
      • IOS36-64-v3608
      • IOS37-64-v5663
      • IOS38-64-v4124
      • IOS41-64-v3607
      • IOS43-64-v3607
      • IOS45-64-v3607
      • IOS46-64-v3607
      • IOS48-64-v4124
      • IOS53-64-v5663
      • IOS55-64-v5663
      • IOS56-64-v5662
      • IOS57-64-v5919
      • IOS58-64-v6176
      • IOS61-64-v5662
      • IOS62-64-v6430
      • USBLoader(s)-ahbprot58-SD-USB-v11b-IDCL


    1. The above underlined forwarder channel will load the first file it finds from the following list:

      • SD+USB:\apps\usbloader\boot.dol
      • SD+USB:\apps\usbloader\boot.elf
      • SD+USB:\apps\usb-loader\boot.dol
      • SD+USB:\apps\usb-loader\boot.elf
      • SD+USB:\apps\usbloader_cfg\boot.dol
      • SD+USB:\apps\usbloader_cfg\boot.elf
      • SD+USB:\apps\WiiFlow\boot.dol
      • SD+USB:\apps\WiiFlow\boot.elf
      • SD+USB:\apps\usbloader_gx\boot.dol
      • SD+USB:\apps\usbloader_gx\boot.elf

Note:

    1. IOS58 is required for the forwarder to launch apps from an SD Card and hard drives formatted as FAT32, NTFS, ext2, ext3 and ext4. It also supports meta.xml arguments and is able to launch apps with direct hardware access.



  • Reinstall the Homebrew Channel (if applicable)
HBCIOS.gif



    1. In the HomeBrew Channel, hit the "home" button. In the top right corner you will see the IOS used by the HBC.


    1. If the HBC is using IOS58 and your HBC is not upside-down, you can skip this step.



    1. If the HBC is not using IOS58 or it is upside-down, you should continue with this step to reinstall it.


ReinstallHBC.gif


    1. Launch the HackMii_Installer via the HBC.


    1. Use the Hackmii Installer to fix/re-install the HBC (using IOS58). Once you've successfully reinstalled the HBC, you can move onto the next step of the guide.


    1. If the HBC is failing to load the HackMii_Installer (just blackscreens), instead launch the Hackmii Installer using the method described in the first Step.


  • USB Loader and Hard Drive setup

The rest of the guide is performed on your computer in order to set up your USB-Loader

  • Partition and Format the External Hard Drive for FAT32
Partition.gif


    1. First check if your drive needs to be formatted by checking the current Format\File-System of the drive.


    1. Open "My Computer", right-click the external hard drive you want to use, then select "properties".


    1. Make note of the Drive Letter of the external hard drive as this will be important later.


    1. If the "File-System" is already FAT32, you can skip this step.



    1. If you have anything saved on the hard drive, you should back it up now as all the data will be lost once you format it.


FAT32.gif


    1. Launch FAT32 GUI Formatter from shortcuts on your Start Menu or Desktop



    1. Make sure you select the drive letter corresponding to your external hard drive.


    1. You may optionally uncheck the "Quick Format" box, then click start.



  • Copy Files to the Hard Drive

    1. Copy everything inside the C:\Users\Shiressen\Desktop\ud folder to the root of your FAT32 hard-drive\partition.



  • Manage Wii backups using Wii Backup Manager (optional)

    1. Launch WiiBackupManager from shortcuts on your Start Menu or Desktop


    1. You can use this program to manage/transfer your electronic backups of Wii Games.


    1. It is very simple to use, but a detailed tutorial on using Wii Backup Manager can be found here:
www.sites.google.com/site/completesg/backup-launchers/iso/wbfs-managers/wii-backup-manager

Note:

    1. Original Wii Discs cannot be read/copied using a computer (unless you have one of the rare LG Drives that is capable of doing so).


    1. To copy
original

    1. Wii Disc's, insert the disc into your Wii and Launch Configurable USB-Loader, and hit the plus sign "+".


    1. To copy
original

    1. Wii Disc's, insert the disc into your Wii and Launch WiiFlow, go to page 2 of WiiFlow's Settings and select "Install", then select "Go".



  • Configure/Customize Configurable USB-Loader (optional)

    1. To Configure/Customize your USB-Loader, use the Configurator for Configurable USB-Loader found here: C:\Users\Shiressen\Desktop\ud\usb-loader\CfgLoaderConfigurator.exe


    1. Optional: additional themes can be found here:
http://wii.spiffy360.com/themes.php

Important notes on default settings:

    1. Two potentially dangerous features have been locked:

      • The ability to remove/delete games
      • The ability to format a hard drive
      To unlock these features, while in the configurable USB-Loader menu, hold "1" for 5 seconds, then enter the password to unlock these features. The password is "AAAA", you can change the password/settings by using the Configurator for Configurable USB-Loader. Hold "1" again for 5 seconds to lock the USB-Loader again (or it will lock automatically again once you exit the USB-Loader).


  • After modding your Wii

After you are done modding your Wii, you can optionally delete any unnecesarry files by using ModMii's "File Cleanup" Feature.

If you used Bannerbomb and choose not to use the File Cleanup feature, in order to avoid having your Wii freeze when accessing the SD Card Menu, you should delete the "aktn" folder where bannerbomb is saved (SD:\private\wii\title\aktn), or rename the entire "private" folder.

At this point you're practically done.
Now you should be downloading the latest homebrew applications and setting them up on your SD Card (or FAT32 USB Hard Drive) so they can be launched via the HBC.

For playing your backups off a USB hard drive, run the USB-Loader Setup feature from ModMii's Main Menu.

For downloading applications, you should:
  • Check out ModMii's batch download pages as it has many popular apps available for download.
  • Download Homebrew Browser via ModMii to get many popular apps, but this is an online only Wii application.
  • For those without internet on their Wii, check out this list of Homebrew applications.
Another great resource is webrewwii.blogspot.com

After getting whatever apps you want, you should get a boot.dol file and possibly a icon.png and meta.xml.
For HBC to read your SD/USB correctly, your card must be structured SD:/apps/application name/boot.dol
If you have a *.dol not named boot.dol, rename it boot.dol, otherwise it will not be recognized by the HBC.
(optional: the icon.png and meta.xml should be saved in the same place as the boot.dol)

  • Credits, Supporting Apps, and Sources

ModMii was written entirely by me, XFlak; however, without the help of many other very talented people ModMii would not exist.
Some people have contributed supporting files or programs, others have shared their knowledge, some have provided ideas and others have given their time.
I have tried my best to recognize everyone's contribution to ModMii regardless of how big or small it is. If I've forgotten someone, please notify me and I'll add them to the credits as quickly as possible.
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
  • ZeroT21 @ ZeroT21:
    it wasn't a question, it was fact
  • BigOnYa @ BigOnYa:
    He said he had 3 different doctors apt this week, so he prob there. Something about gerbal extraction, I don't know.
    +1
  • ZeroT21 @ ZeroT21:
    bored, guess i'll spread more democracy
  • LeoTCK @ LeoTCK:
    @K3Nv2 one more time you say such bs to @BakerMan and I'll smack you across the whole planet
  • K3Nv2 @ K3Nv2:
    Make sure you smack my booty daddy
    +1
  • LeoTCK @ LeoTCK:
    telling him that my partner is luke...does he look like someone with such big ne
    eds?
  • LeoTCK @ LeoTCK:
    do you really think I could stand living with someone like luke?
  • LeoTCK @ LeoTCK:
    I suppose luke has "special needs" but he's not my partner, did you just say that to piss me off again?
  • LeoTCK @ LeoTCK:
    besides I had bigger worries today
  • LeoTCK @ LeoTCK:
    but what do you know about that, you won't believe me anyways
  • K3Nv2 @ K3Nv2:
    @BigOnYa can answer that
  • BigOnYa @ BigOnYa:
    BigOnYa already left the chat
  • K3Nv2 @ K3Nv2:
    Biginya
  • BigOnYa @ BigOnYa:
    Auto correct got me, I'm on my tablet, i need to turn that shit off
  • K3Nv2 @ K3Nv2:
    With other tabs open you perv
  • BigOnYa @ BigOnYa:
    I'm actually in my shed, bout to cut 2-3 acres of grass, my back yard.
  • K3Nv2 @ K3Nv2:
    I use to have a guy for that thanks richard
  • BigOnYa @ BigOnYa:
    I use my tablet to stream to a bluetooth speaker when in shed. iHeartRadio, FlyNation
  • K3Nv2 @ K3Nv2:
    While the victims are being buried
  • K3Nv2 @ K3Nv2:
    Grave shovel
  • BigOnYa @ BigOnYa:
    Nuh those goto the edge of the property (maybe just on the other side of)
  • K3Nv2 @ K3Nv2:
    On the neighbors side
    +1
  • BigOnYa @ BigOnYa:
    Yup, by the weird smelly green bushy looking plants.
    K3Nv2 @ K3Nv2: https://www.the-sun.com/news/10907833/self-checkout-complaints-new-target-dollar-general-policies...