Tutorial  Updated

How to install Android 8.1(LineageOS) to your Nintendo Switch

Before following this guide. Please note that you will need to have some prior experience with both Switch Hacking, and Android in order to install this properly. As this guide will assume you already know how to enter RCM mode and push payloads, and do basic recovery mode tasks

Requirements:
  • A hackable Nintendo Switch(Non iPatched Unit) To check if your Nintendo Switch is hackable. Please follow Step 2 on this page
  • A dedicated SD card(16gb minimum)
  • A way to push access RCM mode and push Payloads(Hekate)
These are not my screenshots. These have been taken from the XDA Thread
https%3A%2F%2Fpbs.twimg.com%2Fmedia%2FD9HtBVIWwAAaQ_Z.jpg%3Alarge

https%3A%2F%2Fpbs.twimg.com%2Fmedia%2FD9Lf0aJWwAAelCo.jpg%3Alarge
https%3A%2F%2Fpbs.twimg.com%2Fmedia%2FD9NEUN6W4AEySOS.jpg%3Alarge

Download and install BalenaEtcher to set up your SD card. Click here to download BalenaEtcher

Go to XDA release thread here, and download the image for your SD card size. For example, I am using a 32gb SD Card so I will need to download the 32GB Image. DO NOT EXTRACT THE DOWNLOADED IMAGE!

Open BalenaEtcher, and select the image you just downloaded. Once the image is selected, go ahead and select your SD card if it was not automatically selected. Please double check that the correct drive is selected before clicking "Flash" as this will erase whatever drive is selected. Once you have confirmed that the correct drive is selected click "Flash"

k0vgWsA.png


Once you click flash you will need to wait upwards to an hour and a half for the image to flash and validate. If this process takes longer than an hour something may have gone wrong. Please start from step 1 and try again. Sometimes changing SD cards will help. You may also have a window pop up asking to format one of your disks. Just close out of these windows.

Once the flash is complete navigate to this XDA release thread again and download the "shield-ifier" zip file and place this zip file on the first partition of the now flashed SD card. For me, this was located at "F:/"

Next, you will need to Download GApps for Android 8.1, with Arm64 from here. Once this file is downloaded. Place this on your SD Cards first partition right alongside your "Sheild-ifier" zip file. Like I did below. Once again for me, this directory was "F:/"

Now close this spoiler and move onto Section 2!

Requirements:
Learn how to access and use RCM Mode. To learn about RCM mode, how to access it please check out this page here.
Hekate Payload
A way to push the hekate payload. To learn how to go about this, please check out this page

Now that the most difficult part of the process is complete, we can now learn how to both boot into our new Android installation, but what we need to do to set it up before it will work properly!

If you have not already, please take your SD card out of your PC and insert it into your Nintendo Switch. From here you will now need to access RCM mode and push the Hekate payload.

Once Hekate launches on your Nintendo Switch. Select Launch by scrolling with the volume buttons, and selecting it by pressing the power button. Then scroll and select "More Configs..."

Before you scroll and select "Switchroot Android" on this screen, get ready to hold your "volume up" button as you will need to press and hold this, the same time that you select "Switchroot Android" Once you're ready. Do this and wait until you see the TWRP menu. Once you see this you can let go of "volume up" Please note, that if you do not enter this TWRP menu first. You may need to reset up your SD Card as GAPPs need to be installed prior to first boot since this is a Beta release. Otherwise, you may not be able to complete the setup.

Once in TWRP you will receive a message asking you to allow TWRP to keep the system as read only or not. Swipe right to allow TWRP to make it's modifications

From here select Mount by touching it on the touchscreen, and check the checkbox next too "system" it may take a few seconds for any paritions to appear. Once the box is selected tap the back button. If this step is not done you will be unable to install Open GAPPS

Now select install, and navigate up a lever in the folder selection on the page, then scroll down and select "external_SD"

From here you will see your two ZIP files from the previous selection. Please select these zip files one at a time starting with "open_gapps" and install each of them. If the system asks you to swipe prior to installation. Go ahead and do so. You will also be asked to wipe the cache/dalvik after installation. Again go ahead and do so. Once complete you can go ahead and click the back button to both leave the installation screen for the next step. Or install the "shield-ify" zip if you choose to use it.


Once you go back to the main menu, you may be asked to install TWRP. If you are asked to do so, go ahead and install it, and wipe the cache/dalvik. Otherwise, go ahead and reboot your system into Hekate and select "Switchroot Android" like before. However this time you will not need to hold "Volume-up" unless you want to access the TWRP menu again. If you're not asked to install TWRP you will need to do so manually if you want root access on your device. Otherwise go back to the Main Menu, select reboot, and tap the "Power off button"

Now enter RCM mode and boot into Hekate again

Once in Hekate, navigate too "Switchroot Android" again and select it without holding "Volume up". Once this is complete, you will begin to boot into LineageOS. Because this is your first boot it may take upwards to 10min for it to boot completely and allow you to set up the android system. Reboots after this initial setup will be faster.

Once booted and setup, you should now have a fully functional Android Tablet! You can now go ahead and set up any emulators or apps as you would normally on a normal Android device. You may even update and use the Nvidia app for in-home streaming if you installed the "Shield-ifier" zip file!

First, download the latest stable build of MAGISK from their XDA Thread here

Then transfer the magisk zip file, too the first partition of your SD Card. For me, this was "F:/"

Insert the SD card back into your Switch, and boot into the TWRP recovery menu by holding "Volume up" while Android is booting

Now mount your system partition as you've done before, navigate to the install menu and install your MAGISK zip file. Much like you did with the GApps zip file when you installed Android. If asked to wipe the cache/dalvik go ahead and do so.

Once MAGISK is installed, boot into Android like normal and download the Magisk Manager APK found here using your internet browser of choice and install it from Android. You may need to enable Unkown sources from within your Device settings before you can install this.

Once this APK has been installed go ahead and open your newly installed Magisk Manager app to verify that you have successfully obtained root access. If you see 4 green checkmarks than that means you've successfully rooted your device!

  • LineageOS 15.1 - Android 8.1 Oreo
  • Based on the Nvidia Shield TV trees
  • TWRP pre-installed
  • CPU and GPU performance profiles
  • Works in handheld and docked mode
  • Audio is supported
  • Joycons connect via Bluetooth, also in handheld mode
Known bugs:
  • Deep sleep, so battery life is not great
  • Auto rotation as we haven't figured out how to talk to the sensor yet
  • Screen off in dock
  • Charging is not detected, but console still charges
  • Some apps don't handle joycon inputs correctly
  • The touchscreen sometimes detects touches even when your finger is just floating over the screen
  • There is a system process ANR on boot. Just click „Wait“ and it won’t happen again until next boot
  • Screenshots do not work
  • WiFi may randomly stop working. If this happens just reboot
  • If TV looks odd and grainy when docking then redock a few times.
  • No TV keyboard that can be used with gamepad
  • SELinux is disabled
  • You can’t access the FAT32 partition of the SD card on macOS. Windows and Linux works.

Credits for part of this FAQ goes to the original XDA thread about this release. As I ammended the end of it with new questions moving forward.

Q: How to switch performance profiles?
A: Go to Settings -> Battery -> Power Profiles. The options are Balanced = 1 GHz CPU / 468 MHz GPU, Quick = 1.4 GHz CPU / 768 MHz GPU and Performance = 1.7 GHz CPU / 920 MHz GPU. Keep in mind that the high-performance profiles use MUCH more battery.

Q: How will updates be done?
A: For updates, flashable zips will be released.

Q: Can we use TV mode?
A: Use HAL launcher from the Play Store to run apps in TV mode.

Q: Nvidia GameStream doesn’t perform well, what to do?
A: Try using Moonlight instead.

Q: Does Magisk work?
A: Yes, just flash it in TWRP

Q: I get an error about „invalid architecture“ when trying to flash GApps
A: Make sure you mounted System in TWRP

Q: Does this work on any Switch?
A: You will need to be able to boot into hekate. If you can do that, your Switch is compatible.

Q: I get a blank notification window saying "Process system isn't responding" that looks like this
YekiGOt.png

A: This is normal, tap the "wait" button

Q: Does the "Pro controller" or other bluetooth controllers work?
A: Yes they do, simply open the bluetooth settings and connect them like any other bluetooth device!

Of course, if there is anything that I should elaborate on, or if you have any questions/concerns in regards to this process. Please do not hesitate to ask or reach out.
 
Last edited by ,

SexiestManAlive

The key that lights the dark
Member
Joined
Apr 18, 2016
Messages
617
Trophies
0
Age
22
XP
2,457
Country
United States
im using a class 4 16gb micro sd lol, its been on the blue loading screen for like 10 minutes
wouldve used my 128gb but im using that for cfw
and it froze and is loading again lol, gonna use the sd card i have in my switch lite, i think its class 10
 
Last edited by SexiestManAlive,

konamicode89

Well-Known Member
Member
Joined
Mar 13, 2018
Messages
142
Trophies
0
Age
34
XP
757
Country
United States
I have issues with the installation speed as well, but everything runs fine after it's installed. Just be real patient, I tried downloading 4 apps at once and with the slow download and installation speed it takes awhile for them to pop up so it's best to install one app at a time unless you give it a half hour to do its thing
 

jimlaman8

Well-Known Member
Newcomer
Joined
Apr 30, 2020
Messages
86
Trophies
0
Age
48
XP
211
Country
United States
I tried with a 400gb sd card, followed the guides, everything looked good after gparted, i used the 16gb android image, maybe the issue. I resized the user to be 128gb for android, in the end in windows i had a gpt protected partion, 30gb raw (emummc) and 131gb unallocated, so something was amiss; edit redid with the 128gb image, this time all was good
 
Last edited by jimlaman8,

FalcoDash107

Member
Newcomer
Joined
May 1, 2020
Messages
14
Trophies
0
Age
18
XP
58
Country
United States
Maybe the switch itself?
Well if ur talkin bout the switch android emulation
Than i think it is the switch causin teh problem
 

bravvv

New Member
Newbie
Joined
Jun 5, 2020
Messages
1
Trophies
0
Age
36
XP
43
Country
France
Hi, I have a firmware > 4.1.0... But I have a SX Pro.
With SX Pro I can launch Hekate, but when I select "Switchroot Android" I have a black screen.

Edit : I had not read page 8 :blush:, I testing with Hekate 5.0.1 and it's OK
 
Last edited by bravvv,

TheMongoStomp

Member
Newcomer
Joined
Dec 30, 2016
Messages
8
Trophies
0
Age
34
XP
70
Country
United States
Hi, I have a firmware > 4.1.0... But I have a SX Pro.
With SX Pro I can launch Hekate, but when I select "Switchroot Android" I have a black screen.

Edit : I had not read page 8 :blush:, I testing with Hekate 5.0.1 and it's OK
are you able to switch back and fourth between sxos and android?
 

skins20

Well-Known Member
Newcomer
Joined
Aug 5, 2016
Messages
96
Trophies
0
Age
34
XP
289
Country
Argentina
Has anyone currently been able to log into the Nvidia games application?

I was able to install it successfully but I cannot log in, when I enter the login section, the browser opens and the page is not displayed, and it gives an error.

Do I have to do something special to be able to log in to the nvidia app.?
 

pernale_06

Member
Newcomer
Joined
Mar 28, 2020
Messages
11
Trophies
0
Age
22
XP
109
Country
Italy
when I try to install gapps it gives me an error that says that the architecture is wrong.
yes, I have selected ARM64 and Android 8.1. Can anyone help me?
 
Last edited by pernale_06,

evil_santa

Well-Known Member
Member
Joined
Jan 15, 2020
Messages
377
Trophies
1
Age
38
XP
1,799
Country
Germany
Hello guys
I made a pre installed android 16 GB image with OpenGApps, Shield-ifier, Joycon Fix, reboot to Payload and Magisk.
I need a tester.
Flash the image to your SD card, send hekate payload 5.3.3 and start dont go into twrp.
https://drive.google.com/file/d/1_xeNiOairi0KsCIt6EgJxd3bndl3L9mj/view?usp=sharing

Please report whether WLAN and Bluetooth and everything else works.
Please connect WLAN only after the initial setup!
 
Last edited by evil_santa,
  • Like
Reactions: VaiCorinthians

pernale_06

Member
Newcomer
Joined
Mar 28, 2020
Messages
11
Trophies
0
Age
22
XP
109
Country
Italy
hello guys
I made a pre installed android image white gaps and all the other stuff.
I need a tester.
Flash the image send hekate payload 5.3.3 and start dont go into twrp.

Please report whether WLAN and Bluetooth and everything else works.
Please connect WLAN only after the initial setup!
I'll try as soon as possible, as i have trouble installing gapps,
 
  • Like
Reactions: evil_santa

pernale_06

Member
Newcomer
Joined
Mar 28, 2020
Messages
11
Trophies
0
Age
22
XP
109
Country
Italy
Hello guys
I made a pre installed android 16 GB image with OpenGApps, Shield-ifier, Joycon Fix, reboot to Payload and Magisk.
I need a tester.
Flash the image to your SD card, send hekate payload 5.3.3 and start dont go into twrp.
https://drive.google.com/file/d/1_xeNiOairi0KsCIt6EgJxd3bndl3L9mj/view?usp=sharing

Please report whether WLAN and Bluetooth and everything else works.
Please connect WLAN only after the initial setup!
Ehy, i'm back. I tried your image and from what i have seen it seems working fine. Bluetooth works fine too, but i didn't check WLAN. You've done a great job
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • SylverReZ @ SylverReZ:
    Communism lol
  • SylverReZ @ SylverReZ:
    OUR products
  • The Real Jdbye @ The Real Jdbye:
    @LeoTCK actually good quality products are dying out because they can't compete with dropshipped chinese crap
    +2
  • BakerMan @ BakerMan:
    @LeoTCK is your partner the sascrotch or smth?
  • Xdqwerty @ Xdqwerty:
    Good morning
  • Xdqwerty @ Xdqwerty:
    Out of nowhere I got several scars on my forearm and part of my arm and it really itches.
  • AdRoz78 @ AdRoz78:
    Hey, I bought a modchip today and it says "New 2040plus" in the top left corner. Is this a legit chip or was I scammed?
  • Veho @ Veho:
    @AdRoz78 start a thread and post a photo of the chip.
    +2
  • Xdqwerty @ Xdqwerty:
    Yawn
  • S @ salazarcosplay:
    and good morning everyone
    +1
  • K3Nv2 @ K3Nv2:
    @BakerMan, his partner is Luke
  • Sicklyboy @ Sicklyboy:
    Sup nerds
    +1
  • Flame @ Flame:
    oh hi, Sickly
  • K3Nv2 @ K3Nv2:
    Oh hi flame
  • S @ salazarcosplay:
    @K3Nv2 what was your ps4 situation
  • S @ salazarcosplay:
    did you always have a ps4 you never updated
  • S @ salazarcosplay:
    or were you able to get new ps4 tracking it \
    as soon as the hack was announced
  • S @ salazarcosplay:
    or did you have to find a used one with the lower firm ware that was not updated
  • K3Nv2 @ K3Nv2:
    I got this ps4 at launch and never updated since 9.0
  • K3Nv2 @ K3Nv2:
    You got a good chance of buying a used one and asking the seller how often they used or even ask for a Pic of fw and telling them not to update
  • RedColoredStars @ RedColoredStars:
    Speaking of PLaystation. I see Evilnat put out a beta for PS3 CFW 4.91.2 on the 22nd.
  • K3Nv2 @ K3Nv2:
    Don't really see the point in updating it tbh
    K3Nv2 @ K3Nv2: Don't really see the point in updating it tbh