Tutorial [HOW-TO] Have a homemade Streetpass Relay
- Thread starter dicamarques
- Start date
- Views 1,936,392
- Replies 7,502
- Likes 27
- Status
I've had the power management disabled, but it didn't seem to make a difference. It's okay. I have an Intel 7260 card just sitting around that I'll switch in at some point. Thanks for your help!
you're more than likely right on the bridged setup. in telnet i can't ping outside (just get no response to the command) wget --help returns nothing, but i get invalid arguments or other stuff that makes me think it's there when i give it --h or -O and whatnot. I'm screwing something up in the basic networking.
----
After a bit more fiddling, i can connect to the router outside of telnet or puTTy and get to the internet fine, but i still cannot install netzone.sh. It always responds with this error: /bin/sh: eval: line 1: /tmp/nzone.sh: not found
--I have no idea what I did but i got streetpasses. still am unable to install your script.
haha damn it. can't even WinSCP into it... Guess I need to manually input the cron job. Do you happen to have the info i'd need to input? or would i be SOL without the macs.sh file?
Day 3 on trying to set up homepass. As I have no router with mac spoofing and trying to setup a working homepass on my android and a usb wifi dongle both failed (and yes, I've tried every hint I found) I wanted to try to use my notebook. Setting up the hotspot with spoofed mac worked and my 3DS found and connected to it (so it already worked "better" than everything else I tried), but it fails in the second step to connect to the internet. Yes I checked the "Allow other network users to connect through this computer's Internet connection" option and on my notebook it also says it has internet connection. Any ideas what else I could try to get my homepass to work?
Note: Ethernet is disabled and the hotspot and my 3DS have static ip addresses.
Note: Ethernet is disabled and the hotspot and my 3DS have static ip addresses.
ItsAllParticles just try
it should return the install script availability and file size if there are wget command and DNS settings available at the router.
Groovy93 Have you tried "Before trying anything else" reciepe in the first post?
Code:
wget --spider http://nintendozone.no-ip.org/installGroovy93 Have you tried "Before trying anything else" reciepe in the first post?
I've got one of those old nintendo wifi connectors and I've got the drivers set up so it's recognized as a Buffalo WLI-U2-KG54-YB (what the adapter is when all of Nintendos stuff isn't installed). I know it's possible for linux users to set up a soft access point, and it can apparently be done on windows 200/xp, but I'm on 8 for school related reasons. As outdated as this guide is, I've followed it up until the configuration of the ASUS software, where it can't find a dll that was removed after xp. I've given it a copy, but it can't find ordinal 1000 inside, so that looks like a dead end. I tried with the official software for the base hardware, but it doesn't seem to support creating soft APs. My next thought was setting up an ad-hoc network, but that's been removed in win 8. I'll keep trying with similar approaches, but if anyone has got homepass running on this hardware already could you let me know how?
Just a follow up; I managed to get homepass working with the official Nintendo Wi-fi USB connector on Windows 8. After the driver modifications I noted in my above post I created a hosted network with the netsh windows commands. After I got that working, it was a simple matter of using the utility created by N3evin that I found in this Reddit thread. Happy homepassing to anybody with the adapter.
it's GOT to be DNS... nslookup returns my second router's IP address (the one i'm trying to do all this with) so i'm not getting out of the router from within the admin/telnet/shell programs.
thanks. digging now. killed DNSMasq just to be sure. I appreciate the point in the right direction.
Seeing as using Google didn't help me much, I'll directly ask here.
I've followed multiple guides multiple times to make sure everything is set up right. I have Windows 7 and a hosted network called "[email protected]" with an assigned IP.
It connects to the internet via my main wireless by sharing. The adapter for main wireless is called "Wi-Fi" and am using MACycle to cycle through the MAC-addresses. I can see the MAC-address is actually changing each time.
On my 3DS I can connect to the internet via "[email protected]" and it has the assigned IP and DNS. It shows it's connected to a Nintendo Zone but other than 1 hit the very first time, I haven't been getting any Streetpass hits when I put it in sleep mode.
Seems to me I've set up everything right, otherwise it wouldn't be connecting and shouldn't even get that single hit. But nothing's happening now.
Should add that I didn't see it flashing green the first time either. So I'm doubting if I actually got a hit and not just "connected".
I've followed multiple guides multiple times to make sure everything is set up right. I have Windows 7 and a hosted network called "[email protected]" with an assigned IP.
It connects to the internet via my main wireless by sharing. The adapter for main wireless is called "Wi-Fi" and am using MACycle to cycle through the MAC-addresses. I can see the MAC-address is actually changing each time.
On my 3DS I can connect to the internet via "[email protected]" and it has the assigned IP and DNS. It shows it's connected to a Nintendo Zone but other than 1 hit the very first time, I haven't been getting any Streetpass hits when I put it in sleep mode.
Seems to me I've set up everything right, otherwise it wouldn't be connecting and shouldn't even get that single hit. But nothing's happening now.
Should add that I didn't see it flashing green the first time either. So I'm doubting if I actually got a hit and not just "connected".
Any idea why nzone.vbs would work perfectly fine on windows 7 and then fail to change the MAC after rebooting? At first, it changed my mac just fine, but now it fails. It does still disable & enable the adapter. Meanwhile, MACycle, which did not work before this reboot, is now the only method that works.
- Status
Similar threads
-
-
-
-
-
-
-
-
-
-
-
-
A @ abraarukuk:guys i hacked my nintendo , only pixel shop is available? any other repo shop recommend please?
-
-
-
-
-
-
-
-
-
-
-
-
-
