Hacking Homebrew Entry on 5.1.0-11J

[Hayato213]

How do I enter homebrew on 5.1.0-11J, I tried Browserhax and it crash

 

[Davidosky99]

Try the following with the browser data cleared and a boot.3dsx file on the root of the sd

• https://dukesrg.github.io/?Decrypt9WIP.dat
• http://go.gateway-3ds.com/
• http://www.reboot.ms/3ds/load.html?Launcher.dat
• http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat
• If you get an error, follow this troubleshooting guide

 

[Ryccardo]

Which browserhax? The .3dsx loading one requires 9.0+, the .dat loaders will work, with which you can easily set up a full A9LH+CFW setup that will give you... everything!

 

[Lacius]

If your goal is to install A9LH and update your system, which is very highly recommended, follow this guide: https://github.com/Plailect/Guide/wiki/Decrypt9-(Browser)

 

[gkoelho]

Doesn't cubic ninja work on such a low firmware?
If not, what's the lowest firmware that Cubic Ninja works on?

Ninjahax is a 1.0 entrypoint. He can use it to get to HBL.

 

[Hayato213]

Try the following with the browser data cleared and a boot.3dsx file on the root of the sd

• https://dukesrg.github.io/?Decrypt9WIP.dat
• http://go.gateway-3ds.com/
• http://www.reboot.ms/3ds/load.html?Launcher.dat
• http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat
• If you get an error, follow this troubleshooting guide

Thanks I got in

 

[Hayato213]

@Davidosky99 thanks again, I managed to install A9LH and Luma CFW on my Eevee 3DS that I recently bought