HENkaku Enso for 3.65 Released

Discussion in 'PS Vita - Hacking & Homebrew' started by Lia, Mar 11, 2018.

  1. fille

    fille GBAtemp Regular

    Member
    2
    Mar 28, 2014
    Belgium
    somewhere
    Ok,but this vpk install sd2vita and do everything automatic,i'm struggling with those config editing.
    I tryed 1x to install it,but gave it up,i'm having it here for 6months,but it isnt that easy as for exapmle a 3ds.
    But give it another shot,i wanted it to work.
    I updated succesfully from enso 3.60 to enso 3.65 cfw,so its not that i'm not capable,but its a little more time consuming then a 3ds.
     
    Last edited by fille, Mar 13, 2018
  2. Lia
    OP

    Lia GBAtemp Advanced Maniac

    Member
    10
    GBAtemp Patron
    Lia is a Patron of GBAtemp and is helping us stay independent!

    Our Patreon
    Jan 29, 2016
    United Kingdom
    USBMC for 3.65 has not been officially released either
     
  3. wakabayashy

    wakabayashy GBAtemp Fan

    Member
    3
    Dec 25, 2014
    France
    France
    i'll wait to update pstv then...

    feedback :

    works > noavls, retroarch, vitamin, maidumptool, pfba, accountswitcher,enable package installer & vita homebrew browser
     
    Last edited by wakabayashy, Mar 13, 2018
  4. Something whatever

    Something whatever Gazer of the East

    Member
    2
    Sep 1, 2015
    United States
    Is it ok to update my vitatv with a USB memory card? Will all my apps work?
     
  5. wakabayashy

    wakabayashy GBAtemp Fan

    Member
    3
    Dec 25, 2014
    France
    France
    same answer here, usbmc & antiblacklist is very important to pstv, but if they don't work...

    so, if anyone have tried... ?
     
    Something whatever likes this.
  6. Lia
    OP

    Lia GBAtemp Advanced Maniac

    Member
    10
    GBAtemp Patron
    Lia is a Patron of GBAtemp and is helping us stay independent!

    Our Patreon
    Jan 29, 2016
    United Kingdom
    [​IMG]
    Replaced the near app on vs0 with VitaShell. This means, when formatting, VitaShell is kept.
    Don't try to attempt this unless you know what you're doing. Messing up vs0 on 3.65 could leave you without a way to run homebrew.
     
    Last edited by Lia, Mar 13, 2018
  7. Ryccardo

    Ryccardo WiiUaboo

    Member
    10
    Feb 13, 2015
    Italy
    Imola
    Yes and no (especially if you try on 3.60 which can be jailbroken starting from a clean system), you only need os0 to boot recovery and reinstall from USB ;)
     
    Lia likes this.
  8. wakabayashy

    wakabayashy GBAtemp Fan

    Member
    3
    Dec 25, 2014
    France
    France
    usmbc doesn't work but antiblacklist works
     
  9. joex11

    joex11 GBAtemp Regular

    Member
    2
    Dec 2, 2013
    San Marino
    just when i sold my sony 32gb card to use the sd2vita...
    has anyone found a solution for those who only have sd2vita and no sony card? on the fat ps vita...
     
  10. Lia
    OP

    Lia GBAtemp Advanced Maniac

    Member
    10
    GBAtemp Patron
    Lia is a Patron of GBAtemp and is helping us stay independent!

    Our Patreon
    Jan 29, 2016
    United Kingdom
    No, you need a memory card.
     
    joex11 likes this.
  11. wakabayashy

    wakabayashy GBAtemp Fan

    Member
    3
    Dec 25, 2014
    France
    France
    wait, some guys are currently trying to get usmbc to works on 3.65, so maybe...
     
    joex11 likes this.
  12. joex11

    joex11 GBAtemp Regular

    Member
    2
    Dec 2, 2013
    San Marino

    thank you both, better wait a little then.
     
    wakabayashy likes this.
  13. yeshuachrist

    yeshuachrist GBAtemp Fan

    Member
    3
    Sep 1, 2010
    United States
    (i think someone already mentioned that if your vita has the 1 gig internal memory that you don't need a official card, because, ux0 is created in that location ................ however .............. without performing a "RESTORE TO FACTORY DEFAULT" entire wipe of the vita memory on 3.60 firmware, I don't see that happening because of the way henkaku and enso have already formatted the ur0 and ux0 .............. so I guess your told to put a official card in there to avoid a BRICK, if your not going to "RESTORE TO FACTORY DEFAULT", before going from 3.60 to 3.65 following the guide)

    (btw, its totally worth upgrading to 3.65, but the creator of that said his goal was 3.67, if your really smart you should just wait a few months, if the new install method is more complicated or requires 3.60, then with confidence its case closed on that issue, not to mention at present, most of the over clocking pluggins don't work, so remember how awful the gameplay would be)

    (I can imagine the sony sharks also peddling out a new series of updates for the vita, in addition to a ban hammer and perhaps a crackdown on the nopaystation, this maybe your only chance to download and play 3.65 games on your hacked vita, just tossing that out there ............... remember how sad it was when sony released a firmware update for the psp after its games were no longer being made and there was no psn services, just to show us what it was capable of having done, so a few strikes, on their part, this would be strike two)

    (in the very least you need to immediately raid the 3.65 games on nopaystation before that is shutdown!)

    (EDIT)

    (restore to factory defaults, but first "unlink" and remove the sd2vita memory card, doesn't matter if your on "mlthaku" use the sd2vita plugin and remove all the "mlthaku" plugins and entries, then update then add your new plugins and your sd2vita card, nothing is deleted or loss, plugins are read from ur0 and your sd2vita card with data is ux0 .......... forget the rest but the guide says it all!) (if your completely unsure like me, just follow the guide go to 3.65 add plugins, add your sd2vita, then update your apps, anything installed new from ur0 should just be transferred to memory card, etc.)
     
    Last edited by yeshuachrist, Mar 13, 2018
  14. Ryccardo

    Ryccardo WiiUaboo

    Member
    10
    Feb 13, 2015
    Italy
    Imola
    Buy a near-free 2 or 4 GB card? :)
     
  15. Something whatever

    Something whatever Gazer of the East

    Member
    2
    Sep 1, 2015
    United States
    So wait? Or is it ok to upgrade via USB?
     
  16. fille

    fille GBAtemp Regular

    Member
    2
    Mar 28, 2014
    Belgium
    somewhere
    So i get my sdcard recognised by my vita.
    Its ux0:16gb sony memorycard and um0:32gb kingston sdcard.
    But if i switch with sd2vita ux0:32gb sdcard,my vitashell will not work,probably cause the pad where vitashell installed is to sony 16gb card instead of 32gb sdcard.
    So is it needed to install vitashell again then?
    I copied my 16 gb sony card over to my 32 gb sdcard.
    In vitashell i can see ux0:16gb and um0:32gb,but i think if i install a game,it will be installed to ux0: instead of um0:
    Im on enso 3.65,henkaku doesnt work,so how can vitashell istalled on 3.65 enso.
    Its strange that when i change in sd2vita my 32gb sdcard to ux0: that my game resogun worked and vitashell dont.
    Like i said before,copied the 16 gb sony card over to the 32gb sdcard.
     
    Last edited by fille, Mar 13, 2018
  17. Lemmingz

    Lemmingz Member

    Newcomer
    1
    Jan 17, 2017
    United States
    My sd2vita v5.0 was delivered today & my microsd should be here tomorrow.

    I want to install sd2vita & henkaku enzo 3.65, should I install henkaku enzo 3.65 first or sd2vita?
     
  18. Lia
    OP

    Lia GBAtemp Advanced Maniac

    Member
    10
    GBAtemp Patron
    Lia is a Patron of GBAtemp and is helping us stay independent!

    Our Patreon
    Jan 29, 2016
    United Kingdom
    henkaku enso 3.65 first
    remember you must have an official memory card to install enso 3.65
     
    Lemmingz likes this.
  19. Lemmingz

    Lemmingz Member

    Newcomer
    1
    Jan 17, 2017
    United States
    Thanks, I've got an official memory card that I've already been using
     
  20. djricekcn

    djricekcn GBAtemp Maniac

    Member
    3
    May 29, 2009
    United States
    I'm stuck on ENSO logo screen, i can get bypass it if i rebuild databse and what not but i can't get sd2vita to load as well (after downloading the 2 days old one). Any tips?
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice