Hacking [Help] Atmosphere 0.17.0 for Mariko

[k1ng_f1sh]

Sorry to hijack this thread, I think the question i need to ask is related to the topic. So i migrated SXOS to Atmosphere using the https://rentry.co/mys8q. Everything went smoothly including restoring boot0 and boot1 for my hidden emuNAND. Except i am not able to boot into Stock sysNAND. I updated my hekate_ipl.ini but that take me straight to emuNAND without asking.

post your current hekate_ipl. mine can boot into sysnand through hekate so i assume yours should be able to do it too if its setup correctly

 

[dragon184]

post your current hekate_ipl. mine can boot into sysnand through hekate so i assume yours should be able to do it too if its setup correctly

Hey k1ng_f1sh,

Pretty much just copied and pasted from the guide. Prior to creating the hekate_ipl, where we have to manually tap payload and select the "fusee-primary.bin", i have noticed that "fusee-secondary.bin" doesn't show up. Not too sure if that is a possible issue. Whereas, I've noticed that both your payloads is ins the atmosphere folder. Do you see both payloads in yours when you're in Hekate?

===================
[config]
autoboot=1
autoboot_list=0
bootwait=3
backlight=100
autohosoff=0
autonogc=1
updater2p=0
bootprotect=0

[Atmosphere CFW]
payload=bootloader/payloads/fusee-primary.bin

[Stock SYS]
fss0=atmosphere/fusee-secondary.bin
stock=1
emummc_force_disable=1
icon=bootloader/res/stock_boot.bmp
===================

 

[k1ng_f1sh]

Hey k1ng_f1sh,

Pretty much just copied and pasted from the guide. Prior to creating the hekate_ipl, where we have to manually tap payload and select the "fusee-primary.bin", i have noticed that "fusee-secondary.bin" doesn't show up. Not too sure if that is a possible issue. Whereas, I've noticed that both your payloads is ins the atmosphere folder. Do you see both payloads in yours when you're in Hekate?

===================
[config]
autoboot=1
autoboot_list=0
bootwait=3
backlight=100
autohosoff=0
autonogc=1
updater2p=0
bootprotect=0

[Atmosphere CFW]
payload=bootloader/payloads/fusee-primary.bin

[Stock SYS]
fss0=atmosphere/fusee-secondary.bin
stock=1
emummc_force_disable=1
icon=bootloader/res/stock_boot.bmp
===================

Wait so at the moment what error does it give when you try to boot sysnand through hekate?

 

[dragon184]

Wait so at the moment what error does it give when you try to boot sysnand through hekate?

No errors, using the hekate_ipl from the guide I get booted straight into Atmosphere. No errors or options to select sysnand. Tried looking everywhere but i don't know how to boot into sysnand at all using Hekate.

If i remove hekate_ipl i get into the Hekate, then select payload and select fusee primary to boot into emunand.

 

[k1ng_f1sh]

No errors, using the hekate_ipl from the guide I get booted straight into Atmosphere. No errors or options to select sysnand. Tried looking everywhere but i don't know how to boot into sysnand at all using Hekate.

If i remove hekate_ipl i get into the Hekate, then select payload and select fusee primary to boot into emunand.

thats because its set on autoboot?

when you press the power button to start the console press volume down as well and it should boot into hekate

 

[dragon184]

thats because its set on autoboot?

when you press the power button to start the console press volume down as well and it should boot into hekate

When I'm in Hekate, under launch i don't have any boot options.

 

[k1ng_f1sh]

When I'm in Hekate, under launch i don't have any boot options.

you definetly patched your boot.dat with the sxgear one right?

 

[kerelenko]

When I'm in Hekate, under launch i don't have any boot options.

You need to add those via hekate_ipl.ini file

 

[dragon184]

you definetly patched your boot.dat with the sxgear one right?

Yeap, just checked. if i didn't, it wouldn't boot into Hekate?

 

[k1ng_f1sh]

Yeap, just checked. if i didn't, it wouldn't boot into Hekate?

can you post a screenshot of your hekate_ipl im pretty sure its not done correctly which is why there's no boot options

 

[dragon184]

You need to add those via hekate_ipl.ini file

OMG! So, what i did now is edited the hekate_ipl.ini to not auto boot.

autoboot=1 to autoboot=0

I think I'm pretty good with this option.

Thanks everyone for the help!

Noob question, since this is the first time I'm using Atmosphere/Hekate.
I should be able to pop back online now right after updating to 11.0.1?

 

[tinnie]

Thanks for the help guys, the guide worked for me and I got back into my Switch super easily. One more question though. Do I need to reinstall all my games again? Because I installed them through Tinfoil from my PC back on SX OS but now they're on the home screen but I can't run them from there. It says the software data is not downloaded.

edit: I thought it would be the sigpatches but that doesn't seem to be it because I downloaded the newest ones and all but 2 games won't run. Also I guess I should mention that I didn't have emunand before so I created it in the portion of the guide where it said to migrate emuMMC (for some reason in my mind I thought that if I don't have it I just create it and go on with the guide) so I guess it's like the games didn't transfer? But I tried to reinstall two of the games I wanted to play and it didn't do anything.

edit 2: so with one game I was able to fix it by uninstalling and installing again rather than just installing over it. I'll see whether that works for all of them

 

[Darkfella]

Hello guys, i got my Mariko Switch an SX Core modchip installed today on it. I had fw 11.0.1 from before that and i see that SX OS dont support that version. I got told that i can run Atmosphere on EmuNAND 11.0.1 and then downgrade the emunand so i can use SX OS. Im really having trouble putting all the information together cos im new into this. Could someone point me in the right direction plese ? I havent done anything with the SX OS yet, only did a NAND dump and generating the license file, but havent started the CFW. What steps do i need to take to downgrade an Emunand to 11.0.0 ?

 

[TheyKilledKenny]

Hello guys, i got my Mariko Switch an SX Core modchip installed today on it. I had fw 11.0.1 from before that and i see that SX OS dont support that version. I got told that i can run Atmosphere on EmuNAND 11.0.1 and then downgrade the emunand so i can use SX OS. Im really having trouble putting all the information together cos im new into this. Could someone point me in the right direction plese ? I havent done anything with the SX OS yet, only did a NAND dump and generating the license file, but havent started the CFW. What steps do i need to take to downgrade an Emunand to 11.0.0 ?

if you follow the steps of the linked guide (https://rentry.co/mys8q), you will end up booting into Atmosphere. From Atmosphere you can use Daybreak to downgrade your emunand to whatever fw version you prefer.
After the downgrade you can restore your original boot.dat on sd root and use sxos as before.

Ciao!

 

[tebyw]

Hello,

I have a switch lite (Sysnand ofw 11.0.1 and Emunand SXOS 3.1 on fw 11.0).
After following the guide, I wanted to launch Atmosphere 0.17 witch Hekate but I get the following error message:
Failed to apply 'nosigchk'.

Which meaning has the error and how can I fix it to start Atmosphere on my Emunand?

Edit: When I am ignoring the message and continue the switch lite get stucked on the switch boot logo.

 

[izy]

Hello,

I have a switch lite (Sysnand ofw 11.0.1 and Emunand SXOS 3.1 on fw 11.0).
After following the guide, I wanted to launch Atmosphere 0.17 witch Hekate but I get the following error message:
Failed to apply 'nosigchk'.

Which meaning has the error and how can I fix it to start Atmosphere on my Emunand?

Edit: When I am ignoring the message and continue the switch lite get stucked on the switch boot logo.

You get that error if you don't have sigpatches installed which are required to run homebrew play backups

 

[Darkfella]

Ty for the answer. I managed to downgrade a few days back, tho i had a problem cos i didnt format the sd card to fat32, but i figured it out Now i am at the stage of figuring out how to make my xbox one controller wirelessly on the switch .

 

[Kaein]

Ty for the answer. I managed to downgrade a few days back, tho i had a problem cos i didnt format the sd card to fat32, but i figured it out Now i am at the stage of figuring out how to make my xbox one controller wirelessly on the switch .

Check this one, not all Xbox one controllers are supported (oldest ones) but maybe yours is good to go, pretty nice hb app btw

https://gbatemp.net/threads/mission...other-consoles-natively-via-bluetooth.572645/

 

[joetancy]

Hi all,

SXOS 3.1.0
iPatched Erista
FAT32 SD Card

I've followed the guide to the tee, but everytime i launch atmos, the screen just turns blank, not even with the backlight. I've reformatted my card to FAT32 too.

so what i did was to format my sd card to FAT32, boot hekate with sx gear, used hekate to format the card to FAT, created a emummc with it as a file based one. But i still cant get it to boot. not even the nintendo switch logo turns up

Please help me! thank you!

 

[joetancy]

Sorry for double posting. My switch booted up after I’ve updated my sysnand to 11.0.1.

I’m now running on FAT32 with sysnand on 11.0.1 and emunand on 11.0.0 with atmosphere 17.0.1 and hekate 5.5.3.