Hekate won't let me use the touch screen.

SuperHans111 Sep 17, 2019.

  1. SuperHans111
    OP

    SuperHans111 Advanced Member

    Newcomer
    2
    Feb 2, 2019
    Australia
    I used minitool partition wizard to format it.

    I have a 64gb card I might test my switch on.
     
  2. MythicalData

    MythicalData GBAtemp Maniac

    Member
    7
    May 11, 2017
    United States
    try formatting the 64gb with guiformat to fat32 32kb, then test with the linked guide, then try again.

    — Posts automatically merged - Please don't double post! —

    the reason I say 64gb is that it would take a lot less time to test than the 400gb you have
     
  3. crazy_p

    crazy_p GBAtemp Regular

    Member
    5
    Sep 3, 2016
    Switzerland
    Are you sure you are injecting the latest Hekate Payload(5.0.2)? Have you tried to inject fusee-primary.bin?
     
  4. SuperHans111
    OP

    SuperHans111 Advanced Member

    Newcomer
    2
    Feb 2, 2019
    Australia
    Haven't tried Fusee-primary yet. I am definitely injecting the latest payload. Gonna try this 64gb card thing first and then I will try fusee-primary. Thanks for helping man.
     
    Last edited by SuperHans111, Sep 21, 2019
  5. SuperHans111
    OP

    SuperHans111 Advanced Member

    Newcomer
    2
    Feb 2, 2019
    Australia
    UPDATE: Okay. Fusee-Primary somehow fixed the touch screen not working on Hekate. I can boot into OFW, but when I try booting into CFW, my switch just crashes and gives me an Atmosphere crash report.
    Is there any reason this might be happening? I will look into it.
     
  6. crazy_p

    crazy_p GBAtemp Regular

    Member
    5
    Sep 3, 2016
    Switzerland
    Do you have any custom Theme (0100000000001000 Folder) in your Atmosphere Folder?
    If so try to delete them!

    If you have an Game Card in your Card Slot remove it temporary.

    To me it still sounds like you are trying to inject an old version of Hekate.. Whats the version Number in the upper left Corner?

    Best would be to start from Scratch, delete your Atmosphere , Sept and bootloader Folder from your Card and download these Files:

    Hekate
    Atmosphere
    Sigpatches Atmosphere
    Sigpatches Hekate

    Copy fusee-primary.bin to bootloader/payloads/ and hekate_ctcaer_5.0.2.bin to
    C:\Program Files (x86)\TegraRcmGUI\favorites\.

    Then inject either hekate_ctcaer_5.0.2.bin or fusee-primary.bin with TegraRcmGUI.

    Here's an premade hekate_ipl.ini File that you can copy into your Bootloader Folder.



     

    Attached Files:

    Last edited by crazy_p, Sep 21, 2019
  7. SuperHans111
    OP

    SuperHans111 Advanced Member

    Newcomer
    2
    Feb 2, 2019
    Australia
    Hekate is 5.0.2 and I deleted my custom themes. Still the same thing. I think I am booting an old fusee-primary or something. If that's even a thing.
    I'll try doing the fresh install. I'm also trying not to lose any of my digital games.
     
  8. SuperHans111
    OP

    SuperHans111 Advanced Member

    Newcomer
    2
    Feb 2, 2019
    Australia
    Okay I deleted absolutely everything and only put on the files you said to put on.
    This means I have no games or homebrew. I have made a backup and I will slowly put different things on to see what is causing the problem.

    Thanks for all the help. :)
     
    crazy_p likes this.
  9. SuperHans111
    OP

    SuperHans111 Advanced Member

    Newcomer
    2
    Feb 2, 2019
    Australia
    Okay so everything works. The only problem I have left is my Homebrew apps aren't working. For example, retroarch crashes, when I try downloading anything off the appstore, it crashes and when I try inserting a game card, my Switch says "Game card could not be read. Please remove and reinsert it".

    Maybe my sigpatches are wrong. You gave me two sigpatches. Which ones do I use? I tried both and that doesn't work. I am only using Atmosphere now. Not Kosmos.
     
  10. crazy_p

    crazy_p GBAtemp Regular

    Member
    5
    Sep 3, 2016
    Switzerland
    Your Apps are probably crashing cause you load HBLauncher in Applet Mode..
    Start any Game while holding the R Button to get full Ram.

    Your Card Slot is not Working cause you downgraded from 9.0.0 or you updated
    to 9.0.0 and set autorcm in ChoidujourNX.
    Hekate sets autonogc if your Fuse Count is lower than 11.

    Update back to 9.0.0 if you need your Card Slot, but before doing so
    create a new Nand Backup (RAW/Boot0/1) from your working System.

    If your'e already on 9.0.0 then probably autorcm is causing the Problem with your Card Slot.

    You can use both Sigpatches, depends on which Bootloader you select in Hekate.
    (Fusee-Primary or Hekate)
     
    Last edited by crazy_p, Sep 23, 2019
    ucef likes this.
  11. SuperHans111
    OP

    SuperHans111 Advanced Member

    Newcomer
    2
    Feb 2, 2019
    Australia
    Yeah I am on 9.0.0|AMS 0.9.4|S
    That's what it says my system version is.

    What do I do about auto-RCM? Simply disable it? and how can I change applet mode?

    Thanks for all your help man. I've never had to deal with this before until now.
     
  12. leerz

    leerz GBAtemp Advanced Fan

    Member
    5
    Jan 11, 2015
    Makati
    chipping in here, i've experienced this one as well, kinda weird tho, the touch is fine on the switch itself
    i noticed nand backup is quite slow, perhaps the sdcard slot missing bits (a similar bug prevents hekate from loading properly // cant detect sdcard) when ofw detects is just fine.

    perhaps this is related to it?

    ps. switch is 5x ofw - i rolled back AMS so i vol+ controls and manually update to 8x with latest ams
    touch is still not working
     
  13. tnt2005

    tnt2005 Member

    Newcomer
    2
    Aug 25, 2016
    i have the same issue, it only happened after opening my switch to change thermal paste and joycon rails, the fan not working after than :/

    anyway i can boot into hekate, i can not press launch but i can go to tools , only top of the screen working. let me know if you hvae the same issue and if you found a workaround. also happens in SX OS
     
  14. SuperHans111
    OP

    SuperHans111 Advanced Member

    Newcomer
    2
    Feb 2, 2019
    Australia
    Please try not to derail the thread. Maybe yours is caused by something different. I'm not sure.
     
  15. tnt2005

    tnt2005 Member

    Newcomer
    2
    Aug 25, 2016
    jeez... have all the attention you want princess.... just test the touch screen more, i did test mine it turns out the lft side, like 8% only, doesnt work...
     
  16. SuperHans111
    OP

    SuperHans111 Advanced Member

    Newcomer
    2
    Feb 2, 2019
    Australia
    I'm only level 1. I need more EXP than you.
     
Quick Reply
Draft saved Draft deleted
Loading...