Hardware Guys please help, i dont know what happen whit my 3ds

[Jona0500]

Yesterday i was playing on my 3ds like always, but few weeks ago it started to shutdown sometimes, but i just turn it on and it was okay, today i was going to play but when i turn it on it gives me this screen :C what can i do ?

 

[proflayton123]

Yesterday i was playing on my 3ds like always, but few weeks ago it started to shutdown sometimes, but i just turn it on and it was okay, today i was going to play but when i turn it on it gives me this screen :C what can i do ?

You've somehow bricked.

 

[Jona0500]

Really ?, could it by becasuse when i installer arm9lh it was trough disamble and soldering, i leaved the 3 solder points inside, :c this is so sad :c i dont did it anything strange :'c

 

[dAVID_]

Poor you.
Lo lamento mucho, amigo.

 

[Jona0500]

Poor you.
Lo lamento mucho, amigo.

Thank you :'c, espero poder solucionarlo, i have a copy of my nand that i did last week

 

[proflayton123]

@gamesquest1 @vb_encryption_vb hardmodding problem~

 

[vb_encryption_vb]

Check the wifi.

 

[Jona0500]

The wi-fi ?, how plug or inplug ?

--------------------- MERGED ---------------------------

@gamesquest1 @vb_encryption_vb hardmodding problem~

Thank you <3 very much

 

[The Real Jdbye]

Really ?, could it by becasuse when i installer arm9lh it was trough disamble and soldering, i leaved the 3 solder points inside, :c this is so sad :c i dont did it anything strange :'c

It could be, maybe the wires are touching something inside the 3DS. Try removing the hardmod and see if the 3DS will boot normally.

 

[Jona0500]

It could be, maybe the wires are touching something inside the 3DS. Try removing the hardmod and see if the 3DS will boot normally.

Sorry for the late response i will check the wifi card, for the hardmod i only leave the a little bit of soldering iron in the contacts, there are no cables

 

[gamesquest1]

Pictures tell a thousand words, without seeing exactly what you have done with your motherboard it would be very hard to try guess what's wrong with it

 

[Jona0500]

Let me take a photo tonigh and i upload it, so you can see what i have done

 

[Jona0500]

Pictures tell a thousand words, without seeing exactly what you have done with your motherboard it would be very hard to try guess what's wrong with it

My 3ds sudenly turns on normal i was going to disamble and puff it turns on normally what it can be ?

 

[The Real Jdbye]

My 3ds sudenly turns on normal i was going to disamble and puff it turns on normally what it can be ?

Maybe the leftover soldering tin was touching something inside the 3DS, but due to you moving the 3DS around the internals got moved just enough so that the leftover soldering tin is no longer being bridged. That's just a guess though.

 

[Jona0500]

Maybe the leftover soldering tin was touching something inside the 3DS, but due to you moving the 3DS around the internals got moved just enough so that the leftover soldering tin is no longer being bridged. That's just a guess though.

I think so too, i hope it never happen again, now i can continue my game , but still i wonder what can be the cause?

 

[The Real Jdbye]

I think so too, i hope it never happen again, now i can continue my game , but still i wonder what can be the cause?

If my guess is right then it'll probably happen again sooner or later, next time it happens open it up and remove the excess solder with some solder wick.

 

[Jona0500]

Thank you if it happen's, i will do that

 

[Jona0500]

Pictures tell a thousand words, without seeing exactly what you have done with your motherboard it would be very hard to try guess what's wrong with it

It was workinkg for one day, and then again that error apear :C, this is what i have inside

 

[gamesquest1]

those 3 points aren't the issue, firstly try to clean off what looks like flux you used, it's possible you used plumbing flu which is very corrosive, I have seen stuff in the past where people have used plumbing flux and the left over residue corroded traces a few months down the line, so that would explain it working for a while afterwards then suddenly failing

see if the residue comes off with a greeny tint, this would indicate it was an acidic flux and it's probably corroded some traces or something

 

[fatsquirrel]

Really ?, could it by becasuse when i installer arm9lh it was trough disamble and soldering, i leaved the 3 solder points inside, :c this is so sad :c i dont did it anything strange :'c

You didnt do anything strange but you disassembled it, soldered it and left some kind of 3 points inside ?
Id say thats damn strange