Getting purple screen whatever i do on switch lite picofly rp2040

[Foxy223344]

Hello guys,

Took me some time to come post, dont know why i didnt earlier. I installed picofly aliexpress on my switch lite with a very professional installer shop, it booted to hekate the first time but couldnt read the emmc, then it purple screen everytime to ofw. After troubleshooting it and resoldering, it just boots to purple screen even with or without chip. We got the emmc out and read the dump, it was locked and we couldnt reflash it, so we got a new emmc, installed it and filled it with dump, but it would stuck on nintendo logo. I saw the video about guide 1 unbrick on youtube and thought lets do it, so we reinstalled the chip and now its back to purple screen again. What can i do in this case? We checked the soldering points and there isnt a short anywhere. Any advice on what to do? We are super lost and i really dont know what else to try. Pics included are the install:

 

[leerz]

this is not an ok install, looking at zoomed in flex installation on the emmc points, the cmd and clk pads are barely making contact.
on oled a purple screen means bad cmd resistor
on other switches a purple screen can be corrupt boot0/boot1 or even corrupt emmc (even bluescreen )
why mess around with replacing emmc?