Hacking Games Freezing

krismason

Member
OP
Newcomer
Joined
Aug 31, 2010
Messages
10
Trophies
0
XP
12
Country
Hi All,

Sorry to be a douche bag however I have modded my sis's wii following the softmod guide HBC with USBLoaderGX all up and running no problems!

I have just bought a Wii and ran the same procedure, this time I have done it with some newer software from the softmod guide (HBC has a black background v.nice!)

http://gbatemp.net/t171901-modify-any-wii-4-2-below

So I updated to 4.2E with MMM

Installed HBC and BootMii

Bought a GC controller from EBAY as the power,reset buttons didnt work and made a NAND backup

Removed TruchaBug, StubIOS, Installed CIOS and patched the system menu

Installed priiloader and enabled the suggested

Put USBLoaderGX on my SD card, hooked up hard drive to USB port and can see all the games!
I have tried about 3 other USB loaders which all load the games

The 2 most important games Super Mario Galaxy and More both freeze!

I cannot understand why and am not sure what I have done wrong any suggestions/help/advice or any info you need to help me please just ask!

I have tried 3 different external hard drives all with only a WBFS partition.

Please help!
hate2.gif
 

krismason

Member
OP
Newcomer
Joined
Aug 31, 2010
Messages
10
Trophies
0
XP
12
Country
Thanks for the fast reply Riley.

This rip definetly works as It is being used on 2 other consoles!

BootMii could not be installed as an IOS.

How do I get the latest CIOS?
frown.gif
(sorry)
 

krismason

Member
OP
Newcomer
Joined
Aug 31, 2010
Messages
10
Trophies
0
XP
12
Country
Thanks again Riley
I should also mention im not connected to the NET
And in frustation I ran the whole modify process again not the update to 4.2 process just the modify part.

All goes as described in the guide.

However with Priiloader

I get a screen with Yellow text that say

ES_identity failed, error 4294966279. ios58 not patched with ES_DIVerfify? using ciso (holding b and then pressing + or - ) will probably solve this. Note you need CIOS for this.
Do you wish to continue?
A = YES B = No Home/Start = Exit

When I hold B and minus or plus it says aborting mission
 

mike333

Well-Known Member
Member
Joined
Aug 30, 2010
Messages
718
Trophies
0
XP
258
Country
Poland
krismason said:
However with Priiloader
I get a screen with Yellow text that say
ES_identity failed, error 4294966279. ios58 not patched with ES_DIVerfify? using ciso (holding b and then pressing + or - ) will probably solve this. Note you need CIOS for this.
Do you wish to continue?
A = YES B = No Home/Start = Exit
When I hold B and minus or plus it says aborting mission
New priiloader installer (v0.5) does not care about or need patched IOSes or other crap like that.
https://code.google.com/p/priiloader/
It only needs new/updated HBC.
 

mike333

Well-Known Member
Member
Joined
Aug 30, 2010
Messages
718
Trophies
0
XP
258
Country
Poland
krismason said:
Bought a GC controller from EBAY as the power,reset buttons didnt work and made a NAND backup
Do You know that lots of cIOS installers requires You to have all GC stuff unplugged?
Just reinstall cIOSes again without controller plugged.
 

krismason

Member
OP
Newcomer
Joined
Aug 31, 2010
Messages
10
Trophies
0
XP
12
Country
mike333 said:
krismason said:
Bought a GC controller from EBAY as the power,reset buttons didnt work and made a NAND backup
Do You know that lots of cIOS installers requires You to have all GC stuff unplugged?
Just reinstall cIOSes again without controller plugged.

Yeh the gc controller was detached straight after I made a nandbackup.
Will try reinstall the cIOS is this the same as IOS?
 

mike333

Well-Known Member
Member
Joined
Aug 30, 2010
Messages
718
Trophies
0
XP
258
Country
Poland
krismason said:
Ok cios is custom ios doh! Anyways
So your saying I should run the update to 4.2 again and modify section for 4.2 of this http://gbatemp.net/index.php?showtopic=171901
As I have only reran the modify bit
Maybe I'm lu64?
No.
I'm saying that GC issue might be good cause of problems.
You said that controller was disconnected so we need another idea.
 

krismason

Member
OP
Newcomer
Joined
Aug 31, 2010
Messages
10
Trophies
0
XP
12
Country
mike333 said:
krismason said:
Ok cios is custom ios doh! Anyways
So your saying I should run the update to 4.2 again and modify section for 4.2 of this http://gbatemp.net/index.php?showtopic=171901
As I have only reran the modify bit
Maybe I'm lu64?
No.
I'm saying that GC issue might be good cause of problems.
You said that controller was disconnected so we need another idea.

Im pretty sure i disconnected it!
Will try some other games tonight.
Thanks for the help so far
 

dn_angel000

Phantom User
Member
Joined
Apr 27, 2010
Messages
592
Trophies
0
XP
224
Country
United States
Try using cIOS250 4 SMG in USB Loader GX game settings! I have the retail version and it didn't work on 249 but when I used 250 it worked!! lol
 

krismason

Member
OP
Newcomer
Joined
Aug 31, 2010
Messages
10
Trophies
0
XP
12
Country
dn_angel000 said:
Try using cIOS250 4 SMG in USB Loader GX game settings! I have the retail version and it didn't work on 249 but when I used 250 it worked!! lol

Thanks, Will try it tonight and get back to you
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
    Veho @ Veho: The cybertruck is a death trap.