Hacking Question FW 1.0 Pegaswitch won't load using puyo puyo

[Ryu009]

Followed this guide to the t: https://switch.hacks.guide/homebrew-launcher-(pegaswitch)
Under Option i - Firmware Version 1.0.0 Step 10 - Launch the albumn applet

I get error code 2162-0002
"An error has occorred. Please hold the POWER button for 12 seconds and turn off the console"

v1.0 of hbm was renamed to hbl.nsp and placed on the sd root
I was able to see the pegaswitch logo screen after using puyo puyo tetris s
I ran the evalfile usefulscripts/nsp.js

Any suggestions? Thanks

 

[designgears]

Just use hekate or reinx from RCM mode, much easier than dealing with pegaswitch.

edit: forgot reinx doesn't work on 1.0.0.

Guide: https://gbatemp.net/threads/switch-hacking-101-how-to-launch-the-homebrew-menu-on-all-fw.504012/

Run thru that and get your backups and everything squared away. (expect to use around 30GB of space on your SD Card)

From there, assuming you want to install NSPs or use SX OS to launch XCIs. Continue reading

-----------------------

This will allow you to update to 5.1.0 without burning fuses (read: you can downgrade back to 1.0.0)
https://gbatemp.net/threads/choiduj...ller-homebrew-for-the-nintendo-switch.513416/

Spoiler

My hekate_ipl.ini to properly launch into 1.0.0 so choidujournx will load, select the option under my name to boot.
Based on tumGER's sdfiles.

[config]
autoboot=0
bootwait=5
customlogo=1
verification=2
{ }
{Launch Homebrew Menu by pressing}
{"R" while launching the album}
{ }
{-- Custom Firmwares --}
[CFW]
kip1=modules/newfirm/loader.kip
kip1=modules/newfirm/sm.kip
[CFW for Firmware 1.0]
kip1=modules/oldfirm/loader.kip1
kip1=modules/oldfirm/sm.kip1
{ }

{-- DesignGears --}
[CFW 1.0.0 +debugmode +fullsvcperm]
kip1=modules/oldfirm/loader.kip1
kip1=modules/oldfirm/sm.kip1
debugmode=1
fullsvcperm=1
{ }

{----- LayeredFS ------}
[LayeredFS]
kip1=modules/newfirm/loader.kip
kip1=modules/newfirm/sm.kip
kip1=modules/newfirm/fs_mitm.kip
atmosphere=1
{ }

{-------- Stock -------}
[Stock]
[Clear Log]
kip1=modules/nx-dreport.kip
{ }

{----- FTP-Server -----}
{Port: 5000}
{ }
{Dont use SDFilesUpdater with this!}
{It will corrupt your SD!}
{ }
[FTP + CFW]
kip1=modules/sys-ftpd.kip
kip1=modules/newfirm/loader.kip
kip1=modules/newfirm/sm.kip
[FTP + LayeredFS]
kip1=modules/sys-ftpd.kip
kip1=modules/newfirm/loader.kip
kip1=modules/newfirm/sm.kip
kip1=modules/newfirm/fs_mitm.kip
atmosphere=1
{ }

{---- Experimental ----}
[Atmosphere]
secmon=modules/atmosphere/exosphere.bin
kip1=modules/atmosphere/loader.kip
kip1=modules/atmosphere/sm.kip
kip1=modules/atmosphere/fs_mitm.kip
kip1=modules/atmosphere/pm.kip
logopath=modules/atmosphere/atmosphere.bmp
atmosphere=1
{ }

{---- Sig Patches -----}
{ }
{Requires the sigpatchpayload.bin}
{That comes with this ZIP}
{ }
[CFW + Signature Patches]
kip1=modules/newfirm/loader.kip
kip1=modules/newfirm/sm.kip
kip1patch=nosigchk
[CFW for fw 1.0 + Signature Patches]
kip1=modules/oldfirm/loader.kip1
kip1=modules/oldfirm/sm.kip1
kip1patch=nosigchk
[LayeredFS + Signature Patches]
kip1=modules/newfirm/loader.kip
kip1=modules/newfirm/sm.kip
kip1=modules/newfirm/fs_mitm.kip
atmosphere=1
kip1patch=nosigchk
[Stock + Signature Patches]
kip1patch=nosigchk
[FTP + CFW + Signature Patches]
kip1=modules/sys-ftpd.kip
kip1=modules/newfirm/loader.kip
kip1=modules/newfirm/sm.kip
atmosphere=1
kip1patch=nosigchk
{ }

{----------------------}
{ }
{Running v6.1 of tumGER/SDFilesSwitch}
{By: tomGER(@tumGER)}
{StevenMattera, WerWolv}
{ }
{------ Thanks to -----}
{ }
{Reswitched Team, CTCaer}
{Thog, vgmoose, Brawl345}
{GGLinnk, jpe230, Adubbz}
{thomasnet, TheDgtl, Rei}
{jakibaki, rajkosto,}
{mariogamer2 and many more}
{ }
{----------------------}

if you want to install NSPs (eshop dumps, free), continue over to the ReiNX guide found here:
https://gbatemp.net/threads/official-reinx-thread.512203/

Or you can use SX OS if you want to use XCIs (not free)
https://sx.xecuter.com/