1. moriczgergo

    OP moriczgergo Lil' Buffer Overflow
    Member

    Joined:
    Dec 28, 2016
    Messages:
    160
    Country:
    Hungary
    fusée (à la) framboise
    A portable RPi Fusée Gelée rig.
    .​
    About
    fusée framboise is a custom bare-bones Raspbian image that has a systemd Unit that loops modshipd.sh of fusee-launcher.

    How-to

    Ingredients
    • A Raspberry Pi Zero (any RPi works, but the Zero tends to run off of any power bank)
    • A power bank (for powering the RPi)
    • A non-powered USB hub (why?)
    • A USB-A to C cable (don't get a no-brand one: it may not have a needed resistor, and it may wreck your Switch or your USB source)
    • A USB-A to Micro cable (for RPi power)
    • A USB Micro to USB-A Female cable (only for the RPi Zero: for plugging in the USB hub)

    SD Setup
    1. Download a fusee-framboise image.
    2. Flash it to your RPi's SD card. (If you don't have a flasher software installed, I recommend Etcher.)

    Cables!
    • Plug the USB Micro to USB-A Female cable into the RPi. (only for RPi Zero)
    • Plug in the USB hub into the USB-A Female cable.
    • Plug in the USB-A to C cable into the USB hub.
    • Plug in the USB-A to Micro cable into the USB hub, and into the RPi.

    Usage
    You should just be able to plug in your Switch, put it into RCM, and the payload should automatically launch.

    Replacing the payload
    To replace the payload, you have two methods: (both need sudo)
    • Replace fusee.bin in /etc/fusee-launcher/ with another payload. (recommended)
    • Copy another payload into /etc/fusee-launcher/, change modchipd.sh to point to it, and restart the fusee-launcher service, or reboot.

    Networking
    You can change the payload over the air. Here's how to do it: (your RPi needs wireless, and you'll need a mobile/normal hotspot to do this)
    • Set a root password with "sudo passwd", and take note of it.
    • Change your default pi user's password from "raspberry". (optional, recommended)
    • Turn on SSH: it's in Interfacing Options of raspi-confiig.
    • Configure your Pi to connect to your phone's network.
    • Reboot to connect to it, run ifconfig, and take note of the settings.
    • Set a static IP based on your ifconfig data.
    • Take note of your static IP. (you should probably take note of it on your phone)
    • Use an app that supports SFTP to connect to your RPi with the new root password. (iOS)

     
    Last edited by moriczgergo, Apr 30, 2018 - Reason: Added a networking tutorial.
    pilas188, mdmachine, Y0shII and 27 others like this.
  2. Taffy

    Taffy jdfiehgvrhfvhfjkvgrjhfejvgrjkbjvr
    Member

    Joined:
    Mar 3, 2017
    Messages:
    617
    Country:
    United States
    we are out of the age of *hax names

    we have entered the realm of "everything is french" names

    I like it. We have various ways of both entering RCM AND doing things with it.


    giant fucking robot made from rcm jigs labo and launchers when
     
    Last edited by Taffy, Apr 30, 2018
  3. moriczgergo

    OP moriczgergo Lil' Buffer Overflow
    Member

    Joined:
    Dec 28, 2016
    Messages:
    160
    Country:
    Hungary
    SwitchX Bot :kappa:
     
    CatmanFan and Taffy like this.
  4. aut0mat3d

    aut0mat3d GBAtemp Regular
    Member

    Joined:
    Mar 15, 2017
    Messages:
    212
    Country:
    Australia
    will try that the next days, thanks a lot!
    Probably we could have a workaround for the need of the usb hub by direct soldering a usb socket with a current limiting resistor (100 ohm would do its job) in series to 5V....
     
  5. nmkd

    nmkd GBAtemp Advanced Fan
    Member

    Joined:
    Oct 25, 2016
    Messages:
    554
    Country:
    Germany
    Nah, we gotta combine french and *hax

    BaguetteDuFromageHax
     
  6. moriczgergo

    OP moriczgergo Lil' Buffer Overflow
    Member

    Joined:
    Dec 28, 2016
    Messages:
    160
    Country:
    Hungary
    Yeah, that would work, but this is a guide specifically made to not require soldering.
     
    aut0mat3d likes this.
  7. jakkal

    jakkal GBAtemp Addict
    Member

    Joined:
    Apr 27, 2018
    Messages:
    2,284
    Country:
    United States
    I'm gonna make a hax called fusee jelly donut

    Or fusee beigbet de gelee
     
    Taffy likes this.
  8. normal19

    normal19 GBAtemp Regular
    Member

    Joined:
    Aug 23, 2014
    Messages:
    125
    Country:
    Afghanistan
    Would it be possible to have /boot host the payload file? This would make it easier to change the payload from Windows
     
    XxBLUExX and aut0mat3d like this.
  9. H1B1Esquire

    H1B1Esquire RxTools, the ultimate CFW machine.
    Member

    Joined:
    Nov 2, 2016
    Messages:
    3,556
    Country:
    United States
    We need: Omele du formage, Royale du formage/with cheese, FiFi BonBon, Oui G. numba un, and [​IMG] .
     
  10. aut0mat3d

    aut0mat3d GBAtemp Regular
    Member

    Joined:
    Mar 15, 2017
    Messages:
    212
    Country:
    Australia
    Or replace it via samba share
     
  11. normal19

    normal19 GBAtemp Regular
    Member

    Joined:
    Aug 23, 2014
    Messages:
    125
    Country:
    Afghanistan
    I would like a "portable" fusee trigger to have its payload easily changed wherever I go, and most places don't have a Linux box to change files with or a way to connect Rpi to screen and keyboard
     
  12. moriczgergo

    OP moriczgergo Lil' Buffer Overflow
    Member

    Joined:
    Dec 28, 2016
    Messages:
    160
    Country:
    Hungary
    well, i just ripped network out from the kernel...
    but /boot may work.

    — Posts automatically merged - Please don't double post! —

    lemme test boot speeds w/o network, and then I'll decide the method of implementation.
     
    normal19 likes this.
  13. aut0mat3d

    aut0mat3d GBAtemp Regular
    Member

    Joined:
    Mar 15, 2017
    Messages:
    212
    Country:
    Australia
    totally right, you want to have it booted up as quick as possible i guess ;)
     
  14. Joxley192

    Joxley192 Advanced Member
    Newcomer

    Joined:
    Feb 22, 2018
    Messages:
    75
    Country:
    United Kingdom
    Will this work on raspberry pi 2 or 3 as well o is it just for raspberry zero and the first raspberry pi
     
  15. moriczgergo

    OP moriczgergo Lil' Buffer Overflow
    Member

    Joined:
    Dec 28, 2016
    Messages:
    160
    Country:
    Hungary
    Turns out that I can't rip out networking fully, and the boot time doesn't really change, so I'm going to open an FTP share to the directory.

    — Posts automatically merged - Please don't double post! —

    It works on all RPis.
     
    aut0mat3d likes this.
  16. Joxley192

    Joxley192 Advanced Member
    Newcomer

    Joined:
    Feb 22, 2018
    Messages:
    75
    Country:
    United Kingdom
    Nice I will try in about half anhour cause I have been trying to set fusee launcher up on my raspberry pi 2 its just wasn't working right so I hope this works or the new android app
     
  17. guily6669

    guily6669 GbaTemp is my Drug
    Member

    Joined:
    Jun 3, 2013
    Messages:
    1,909
    Country:
    United States
    What about just using your phone and a simple cable, press a button and its all done in like a minute...
     
  18. moriczgergo

    OP moriczgergo Lil' Buffer Overflow
    Member

    Joined:
    Dec 28, 2016
    Messages:
    160
    Country:
    Hungary
    This is for the people who want a "modchip", but don't want to open their Switch, (like me)
     
  19. VinsCool

    VinsCool Persona Secretiva Felineus
    Moderator

    Joined:
    Jan 7, 2014
    Messages:
    13,969
    Country:
    Canada
    That name is great hahaha :D

    It sounds like a fancy cake shaped as a rocked, with raspberries on top with chantilly cream.
     
    Cyan likes this.
  20. guily6669

    guily6669 GbaTemp is my Drug
    Member

    Joined:
    Jun 3, 2013
    Messages:
    1,909
    Country:
    United States
    You dont need to open it anyway... buy a 3D printed jig and its the same or easier than connecting a joy-con to the Switch... I will probably add a button on my right joy-con or solder a simple magnetic switch in it and just passing a magnet like TheCyberQuake did.

    My phone is a way better modchip as its pocket size, has its own battery that last like a week in standby and already goes everywhere with me all the time...
     
Draft saved Draft deleted
Loading...

Hide similar threads Similar threads with keywords - framboise, portable, fusée