Freshly modded original Wii, errors when loading backups

Discussion in 'Wii - Hacking' started by DaveLinger, Mar 29, 2011.

  1. DaveLinger
    OP

    Newcomer DaveLinger Newbie

    Joined:
    Mar 29, 2011
    Messages:
    5
    Country:
    United States
    Hello everyone!

    I have an original US Wii (bought on release day), which I played occasionally and legitimately until yesterday. It was running menu version 4.3U, and I followed the guide here (using Smash Bros) to install HBC and everything else that is included as part of the tutorial. Everything went splendidly, and all of the homebrew apps work fine. I installed NeoGamma R9 b47 as a channel, and installed Darkcorp 1.1 Full.

    However, I can't get any game backups to run. I have four US Wii ISOs on my computer - I burned two of them to DVD+Rs, but the Disc channel cannot recognize them, even though Darkcorp installed fine ("Unable to read the disc"). When attempting to boot the DVD backups from NeoGamma (IOS249 Rev 21), I get "DVD Err(1208), Disc ID". I also tried NeoGamma R8, which did the same thing, although gave a slightly differently worded error and error number.

    Correct me if I'm wrong, but because I have an original, first-run, launch date Wii, I should be able to run DVD backups.

    So then I tried formatting a 16GB SDHC card as WBFS, and installing a couple of the ISOs on it. NeoGamma mounts the SDHC properly and detects the games, but as soon as a game is launched, I get the "An error has occurred. Press the Eject Button, remove the Game Disc, and turn the power OFF." message.

    Original games still work fine.

    here is my output from sysCheck 2.0.1:

    Code:
    sysCheck v2.1.0b5 by Double_AÂÂÂÂÂÂÂÂÂÂÂÂ
    ...runs on IOS58 (rev 65535).ÂÂÂÂÂÂÂÂÂÂÂÂ
    ÂÂÂÂÂÂÂÂÂÂÂÂ
    Region: NTSC-UÂÂÂÂÂÂÂÂÂÂÂÂ
    System Menu 4.3U (v513)ÂÂÂÂÂÂÂÂÂÂÂÂ
    Homebrew Channel 1.0.8 running on IOS58ÂÂÂÂÂÂÂÂÂÂÂÂ
    Hollywood v0x11ÂÂÂÂÂÂÂÂÂÂÂÂ
    Console ID: 34316XXXÂÂÂÂÂÂÂÂÂÂÂÂ
    Boot2 v4ÂÂÂÂÂÂÂÂÂÂÂÂ
    Found 91 titles.ÂÂÂÂÂÂÂÂÂÂÂÂ
    Found 48 IOS on this console. 4 of them are stub.ÂÂÂÂÂÂÂÂÂÂÂÂ
    ÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS4 (rev 65280): StubÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS9 (rev 65535): Trucha BugÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS10 (rev 768): StubÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS11 (rev 65535): Trucha BugÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS12 (rev 526): No PatchesÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS13 (rev 1032): No PatchesÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS14 (rev 1032): No PatchesÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS15 (rev 1032): No PatchesÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS16 (rev 512): StubÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS17 (rev 65535): Trucha BugÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS20 (rev 65535): Trucha BugÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS21 (rev 65535): Trucha BugÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS22 (rev 1294): No PatchesÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS28 (rev 65535): Trucha BugÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS30 (rev 65535): Trucha BugÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS31 (rev 3608): No PatchesÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS33 (rev 65535): Trucha BugÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS34 (rev 3608): No PatchesÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS35 (rev 65535): Trucha BugÂÂÂÂ ES IdentifyÂÂÂÂ NAND AccessÂÂÂÂ
    IOS36 (rev 65535): Trucha BugÂÂÂÂ ES IdentifyÂÂÂÂ NAND AccessÂÂÂÂ
    IOS37 (rev 65535): Trucha BugÂÂÂÂ NAND AccessÂÂÂÂÂÂÂÂ
    IOS38 (rev 65535): Trucha BugÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS40 (rev 65535): Trucha BugÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS41 (rev 65535): Trucha BugÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS43 (rev 65535): Trucha BugÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS45 (rev 65535): Trucha BugÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS46 (rev 65535): Trucha BugÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS48 (rev 65535): Trucha BugÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS50 (rev 65535): Trucha BugÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS51 (rev 4864): StubÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS52 (rev 65535): Trucha BugÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS53 (rev 65535): Trucha BugÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS55 (rev 65535): Trucha BugÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS56 (rev 65535): Trucha BugÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS57 (rev 65535): Trucha BugÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS58 (rev 65535): Trucha BugÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS60 (rev 65535): Trucha BugÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS61 (rev 5662): No PatchesÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS70 (rev 65535): Trucha BugÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS80 (rev 65535): Trucha BugÂÂÂÂÂÂÂÂÂÂÂÂ
    IOS202[57] (rev 65535): Trucha BugÂÂÂÂ NAND AccessÂÂÂÂ USB 2.0ÂÂÂÂ
    IOS222[38] (rev 65535): Trucha BugÂÂÂÂ ES IdentifyÂÂÂÂ NAND AccessÂÂÂÂ USB 2.0
    IOS223[37] (rev 65535): Trucha BugÂÂÂÂ NAND AccessÂÂÂÂ USB 2.0ÂÂÂÂ
    IOS224[57] (rev 65535): Trucha BugÂÂÂÂ NAND AccessÂÂÂÂ USB 2.0ÂÂÂÂ
    IOS236[36] (rev 65535): Trucha BugÂÂÂÂ ES IdentifyÂÂÂÂ NAND AccessÂÂÂÂ
    IOS249 (rev 21): Trucha BugÂÂÂÂ NAND AccessÂÂÂÂ USB 2.0ÂÂÂÂ
    IOS250 (rev 65535): Trucha BugÂÂÂÂ NAND AccessÂÂÂÂ USB 2.0ÂÂÂÂ
    IOS254 (rev 65281): BootMiiÂÂÂÂÂÂÂÂÂÂÂÂ
    BC v6ÂÂÂÂÂÂÂÂÂÂÂÂ
    MIOS v10ÂÂÂÂÂÂÂÂÂÂÂÂ
    ÂÂÂÂÂÂÂÂÂÂÂÂ
    Report generated on 2011/03/28.
    I've googled all of my errors and I've searched around for hours trying to get this stuff running, but I can't figure it out. Any ideas?
     
  2. ddetkowski

    Member ddetkowski GBAtemp Maniac

    Joined:
    Jun 15, 2009
    Messages:
    1,141
    Location:
    United States
    Country:
    United States
    switch to DVD-R's, much better compatibility with Wii's reading them.
    I had the same experience with +R's and switching to -R's played fine.
    Some Wii's read +R's fine, but its hit or miss.
     
  3. DaveLinger
    OP

    Newcomer DaveLinger Newbie

    Joined:
    Mar 29, 2011
    Messages:
    5
    Country:
    United States
    I see, I see - thanks! I will buy some DVD-R tomorrow.

    Any idea why SD loading isn't working?
     
  4. ddetkowski

    Member ddetkowski GBAtemp Maniac

    Joined:
    Jun 15, 2009
    Messages:
    1,141
    Location:
    United States
    Country:
    United States
    When you softmodded, what guide did you follow?
    I would re-mod it using modmii on your PC to re-mod, and yes, you can safely
    re-mod a modded wii with modmii, just follow the self-generated guide modmii
    outputs for you. click on my sig "modmii for windows".......
     
  5. Taleweaver

    Member Taleweaver Storywriter

    Joined:
    Dec 23, 2009
    Messages:
    5,127
    Location:
    Belgium
    Country:
    Belgium
    (yes, it's on the gamecube FAQ...but it applies to wii discs as well)


    I can't say much about the SDHC not working. It sounds like the classic #002 error (blue screen, white text, yes?). Isn't there an option in neogamma to set that option off? (like '002fix=on' or something).
    Neogamma is the best loader for what backup discs are concerned, but when it comes to loading from usb loading* then loaders like wiiflow or USB loader CFG offer better compatability.



    *while loading from sdhc is actually different, it falls in the same category
     
  6. DaveLinger
    OP

    Newcomer DaveLinger Newbie

    Joined:
    Mar 29, 2011
    Messages:
    5
    Country:
    United States
    I tried burning an ISO with the booktype set to DVD-ROM, same results. As for SDHC not working, it goes through a few different loading messages, then turns black, flashes green real quick, then it's white text on a black screen, and it's a Wii font (for the error).

    I used the guide stickied here to mod it (how to mod any wii), but I will try using ModMii.
     
  7. DaveLinger
    OP

    Newcomer DaveLinger Newbie

    Joined:
    Mar 29, 2011
    Messages:
    5
    Country:
    United States
    Okay, I've completely re-modded the Wii with ModMii. I did NOT re-install Darkcorp or anything after finishing ModMii.

    The NeoGamma B9 channel from before throws the same error. I put NeoGamma B8 on my SD card, and it gives the same DVD read error as before. Loading a game from SDHC gives the same error as before.

    I guess the only thing I have left to try is using real DVD-Rs (that is, not using DVD+Rs with the booktype set to DVD-ROM)?

    EDIT: WiiFlow works fine. That's odd. I guess I'll be using it.
     
  8. XFlak

    Member XFlak Wiitired but still kicking

    Joined:
    Sep 12, 2009
    Messages:
    9,122
    Location:
    Ontario
    Country:
    Canada
    your old version of neogamma isn't detecting the version of your cIOS249 (v21003) is a cIOS. Either use a different loader like cfg usb loader, or use ModMii's advanced downloads to change the version number of d2x base 56 cIOS to rev19-21.
     
  9. WiiPower

    Member WiiPower GBAtemp Guru

    Joined:
    Oct 17, 2008
    Messages:
    8,165
    Country:
    Germany
    NeoGamma only loads from discs or wbfs formatted devices. And the sd game loading code in NeoGamma might be broken, haven't tested it in ages.
     
  10. DaveLinger
    OP

    Newcomer DaveLinger Newbie

    Joined:
    Mar 29, 2011
    Messages:
    5
    Country:
    United States
    Well, my SD card is formatted as WBFS, and NeoGamma was detecting the games; they just wouldn't boot properly. But anyway, now that WiiFlow is working perfectly from my SD card (using a USB card reader in the USB port and it's treating it as a hard drive), I'll ditch NeoGamma and not worry about playing backup discs. I'll do original discs and USB backups.

    Still, thanks for the help XFlak. If I end up trying NeoGamma again I will keep this in mind.
     

Share This Page