Emunand Switcher - Multitool for SXOS and Atmosphere - With Mariko and AULA OLED support

Emunand Switcher 3.60 Multitool for SXOS and Atmosphere

Introduction:

After an idea, I started to develop this payload app. The app is rather for developers and testers thought but who can use it, with pleasure... This can simultaneously operate a maximum of three Emunands on the SD card per CFW and be changed with a few clicks. The Emunands and the content installed on SD are all separate and can be updated with different system software versions.

At the moment this is for SXOS and Atmosphere SD Emunand/Emummc. It works on all system software versions (payload) because it is an RCM app and will run before any CFW or Nintendo code follows.

screen_1A8D0168.jpg screen_1AEA5F90.jpg screen_186C43F8.jpg screen_0D7968E5.jpg scr20210321_161104.jpgscr20210321_161128.jpgscr20220405_162612.jpgscr20220405_165448.jpgscr20220407_003415.jpgscr20220406_164513.jpg


New Features 3.6:

- New feature: Ability to load a custom splash for each payload
- The image must have a resolution of 1280x720px and format ARGB32, like background.bmp
- The image must have the same name as the payload and be located in the "argon/payloads" folder, e.g. at fusee.bin = fusee.bmp


New Features 3.5:

- File manager, copy file and folder added percentage display, autoclose info window after copying
- Updated to 3.5
- General bug fixes and stability fixes


New Features 3.4:

- Menu colors can now be set arbitrarily:
- Textcolor
- Tab Textcolor
- Standard Payload Icon color

- Updated to 3.4
- General bug fixes and stability fixes

Thanks https://gbatemp.net/members/twocool4life86.591345/ for the color settings test.


New Features 3.3:

- Update to hekate bdk 5.7.2
- AULA OLED Switch support
- Hardware Info Page revised
- Payload ATM changed to fusee.bin, it is also possible with fusee-primary.bin but fusee.bin is preferred
- Fix slider brightness value for AULA
- Updated to 1.4
- General bug fixes and stability fixes

Thanks @dezem und @twocool4life86 for the AULA OLED tests, without them this version would not have been possible!


New Features 3.2:
  • Typo fixed
  • Tools Tab: Choose language switch added Deutsch / Englisch
  • Selected language is saved in lang.ini GER / ENG
  • Update zu v 3.2

New Features 3.1:

- Build with newest hekate HW Libs 5.5.7
- ATM Tab first
- Some Buttons Theme fix
- Fixed a Error after autoclosing a window with X Button (Close Filemanager and other Windows)

New in Emunandswitcher 3.00: Only German Text
  • Build with newest hekate HW Libs
  • Mariko Support
  • Joycon Mouse
  • UMS SD Card
  • Hardware info Page
  • Reload Menu
  • Added Filemanager for Argon and Emunandswitcher
  • Added Reboot Menu with Power Button
  • Forwarder and Reboot to Payload files fixed for Atmosphere 19+
  • Partition or SD Files Switcher*
Key assignment usage Filemanager:
  • Touch screen as usual
  • Joycon Mouse, A = Enter folder / Choose Buttons, B = Back Folder, X = Close Window
  • Joypad up / down Filelist navigation, A = Enter folder, B = Back Folder, X = Close Window
*If SD files works (emummc.ini of SD files is in the folder "emummc"), the emummc.ini of a partition emummcs can be copied / renamed to "emunandswitcher/folders atm/emummc/emummc_part.ini". You can now switch between partition and SD files... The contents are temporarily in "emunandswitcher/folders atm/contentsPA" for partition or "emunandswitcher/folders atm/contentsSD" for SD files.


Release 2.11 changes: Mini update

- Reload button in "Edit Config" to see the saved entries immediately

- Since the SD Files Emummc from Atmosphere now works correctly with the latest system software, "titles" folder changed to "contents"

New in Emunandswitcher 2.1:

- Reconstruction of the Tools tab because of additional functions

- CPU temperature display

- Current consumption in mA and battery voltage in V, display green when charging, red when discharging

- Possibility to adjust the brightness of the display using the slider, the set brightness is saved and automatically loaded when the app is restarted.

- Edit the Config.ini directly in the app, after a software update of an Emunand the text can be changed directly before booting.

- Set RTC time and date!!! The time of the real-time clock can be set so that the date is displayed correctly in the Emunandswitcher and hekate. Attention: The time in the home menu of the switch must then be adjust. Afterwards the same time and date will be shown in the RCM and switch menu!

Update to 2.11:

For users of version 2.0, simply replace the "logos" and "sys" folders in the Emunandswitcher folder.


Release 2.0 changes:

- Completely new GUI, with live update for theme info, installed emunand display, battery, date and time display.

- Time and date come from the RTC and can be wrong! With Ubuntu the RTC could be set, works then also in Hekate correctly. Fix GMT + 1h and with summer time switching.

- Emunand switcher for SXOS and Atmosphere with the usual functions, switchable via tabs.

- Ability to delete theme before booting for both CFWs under Tools.

- Update possibility for SXOS, copy boot.dat e.g. with nxmtp on the SD, then in the RCM update, reboot

- Payload Loader Argon compatible, displays the payloads from the argon folder, two rows of payloads per tab


Installation guide SXOS:

Before installation, an Emunand must be created by SXOS and also work!

The installation should be made on the PC, console off, SD in the PC (important because of the Emutendo folder, otherwise there are errors) So not with NXShell or something ...

1. Copy folder emunandswitcher to root SD

An Emunand must already be installed sxos/emunand = Emunand 1

2. Copy desired Emunandbackup into emunandswitcher/folders sx/emutmp01 = Emunand 2
3. Copy desired emunandbackup into emunandswitcher/folders sx/emutmp02 = Emunand 3

4. Copy Emuntendo folder content in emunandswitcher/folders sx/emutendo01 = Emunand 2 Emutendo
5. Copy Emuntendo folder content in emunandswitcher/folders sx/emutendo02 = Emunand 3 Emutendo

Optional for Themes and LayeredFS:

- Copy titles folder content in emunandswitcher/folders sx/titles01 = Emunand 2 Titles
- Copy titles folder content in emunandswitcher/folders sx/titles02 = Emunand 3 Titles

The folder structure will change if an emunand is being switched, please do not change it. The app orientate on the folder which Emunand is installed, etc. If the original state is to be established, install Emunand 1. Then everything is in the state as only one Emunand would be installed.

6. Edit config.ini in the emunandswitcher folder as you like: Edit only the back text! e.g.
Emunand 1 = System software 6.20
Emunand 2 = System software 5.10
Emunand 3 = System software 3.00

Or

Emunand 1 = Testemunand
Emunand 2 = Systememunand
Emunand 3 = Whatever

After an update of an emunand the config.ini has to be edited again manually.

7. Copy emunsw.nro to switch/emunsw/emunsw.nro

8. Copy emunandswitcher 0104449021444000.nsp to SD root

9. SD card back into Switch and boot SXOS

The Emunandswitcher "emunsw.bin" can be started via a Payload Loader like Dongle, TegraRCM etc.
But it is simpler:

10. To start from the Switch menu, install Emunandswitcher 0104449021444000.nsp.

To start from the homebrew menu run Emunandswitcher there.

11. The installation is done and configured you can start ...



Installation guide Atmosphere:

Before installation, an SD Emummc must be created by hekate and also work! It is best to save the eMMC folder with the archive bit set on the PC. Also secure the associated Nintendo folder.

The installation should be made on the PC, console off, SD in the PC (important because of the Nintendo folder, otherwise there are errors) So not with NXShell or something ...

1. Copy folder emunandswitcher in root SD and copy folder emummc in root SD

An Emunand must already be installed emummc/SD00 = Emunand 1
Copy the previously saved folder eMMC to emummc/SD00, copy the contents of the Nintendo folder to emummc/SD00/Nintendo

2. Copy desired Emunandbackup to emunandswitcher/folders atm/emutmp01 = Emunand 2
Copy Nintendo folder content in emunandswitcher/folders atm/emutmp01/Nintendo = Emunand 2 Nintendo

3. Copy desired Emunandbackup to emunandswitcher/folders atm/emutmp02 = Emunand 3
Copy Nintendo folder content in emunandswitcher/folders atm/emutmp02/Nintendo = Emunand 3 Nintendo

4. Copy titles folder content in emunandswitcher/folders atm/
Release 2.11 changes: Mini update

- Reload button in "Edit Config" to see the saved entries immediately

4. Copy contents folder content in emunandswitcher/folders atm/contents01 copy = Emunand 2 Titles
5. Copy contents folder content in emunandswitcher/folders atm/contents02 copy = Emunand 3 Titles

The folder structure will change if an emunand is being switched, please do not change it. The app is based on the folder which Emunand is installed, etc. If the original state is to be established, install Emunand 1. Then everything is in the state as only one Emunand would be installed.

6. edit config.ini in the emunandswitcher folder as you like: edit only the back text! e.g.
Emuemmc 1 = Systemsoftware 3.00 ATM
Emuemmc 2 = Systemsoftware test
Emuemmc 3 = Systemsoftware XXX ATM


After an update of an emunand the config.ini has to be edited again manually.

7. Copy emunsw.nro to switch/emunsw/emunsw.nro

8. Copy emunandswitcher 0104449021444000.nsp to SD root

9. SD card back into Switch and boot Atmosphere

The Emunandswitcher "emunsw.bin" can be started via a Payload Loader like Dongle, TegraRCM etc.
But it is simpler:

10. To start from the Switch menu, install Emunandswitcher 0104449021444000.nsp.

To start from the homebrew menu, run Emunandswitcher.

11. The installation is done and configured you can start ...

Note: If the Atmosphere CFW version is changed (New SD Files), the fusee-primary.bin payload in the emunandswitcher/payloads folder must also be replaced with the new one. Also the files in the titles folders must be replaced by the new ones. Otherwise Atmosphere will not start anymore.



Use:

Start the Emunandswitcher via the desired method: Start via NRO in the Homebrew menu, or start NSP in the Switch Menu, or send the payload. Select the desired CFW on the switch.

The app informs live if a theme is installed. If a theme is deleted, it will be recognized and displayed. To avoid the startup error when a system software update was made, the theme must be deleted. (Theme del under Tools)
The Themes and other LayeredFS files in the titles folder are moved when changing an Emunand, so are each bound to the installed Emunand.

Select desired tab ...

Under "Start CFW", the currently active emunand is being updated from config.ini.
"Emunand 1 - 3" displays the input in the config.ini.

To change an Emunand simply press on the desired icon. The app always informs what is done or if something should be wrong. Nothing is changed as long as the conditions are not right!

Attention: With SXOS only boot0.bin, boot1.bin and full.00.bin are checked because there can be different sizes of an emunand. Atmosphere checks if the folder eMMC exists.

After the change, the changed emunand is displayed under "Start CFW". Start with the CFW icon, the CFW will start with the changed Emunand.

Repeat these steps for every change you want.
To make the original state just install Emunand 1 and start CFW.


Tools:

Power Tools: Option for RCM Reboot, Power off or Reboot OFW

Brightness can be adjusted with the slider, the brightness is saved automatically and the value is loaded automatically when the app is started.


Configuration Tools:

Edit Config.ini, open the window, select the desired text line and edit as described above. The disk symbol is used to save, exit the window with x.
Info: Only the currently installed Emunand is updated in the menu immediately, the other texts are only displayed after restarting the app.

RTC time and date, open window, switch keyboard to numbers, change desired entry. The disk symbol is used to save, exit the window with x. Format of time and date: HH:MM, DD.MM.YYYY e.g. 15:06, 01.08.2019, always fill with 0 for single-digit numbers.

Info = Info


System Tools:

Delete Theme SX / ATM, deletes the theme of the currently installed Emunand

Update SXOS:

- Copy boot.dat e.g. with nxmtp to folder emunandswitcher/updateSX
- Start Emunandswitcher, under Tools click on Update SXOS
- Restart CFW via SXOS Icon or via Payload Tab if Argon is present
- finished!


Info:

The use is as always at your own risk! I'm not responsible if your SD card is broken, your switch explodes or the moon falls to earth! This can happen when using any homebrew and also original software ... The tests were very successful and all bugs should be fixed.

Created by Storm 2019 with Visual Studio, LittlevGL and DevKitPro, based on argonNX and hekate, Icons template and some code lines by @mrdude. Thanks to the programmers! Thanks also to Gabor for LittlevGL!


If you do not like it, do not use it and do not write anything here. Thanks! Sorry for my english! Regards Storm21

German Release, Deutsche Version: https://psxtools.de/index.php/Threa...Der-erste-Emunand-wechsler-Deutsch-Mehrere-E/

Download:
:download:Emunand Switcher Releases


Source Code:
:download: https://github.com/Storm21CH/Emunandswitcher

Release 1.0
Emunand Switcher

Introduction:

After an idea, I started to develop this payload app. The app is rather for developers and testers thought but who can use it, with pleasure... This can simultaneously operate a maximum of three Emunands on the SD card and be changed with a few clicks. The Emunands and the content installed on SD are all separate and can be updated with different system software versions.

At the moment this is just for SXOS, but as soon as the atmosphere SD Emunand is released on June 15th, I'm ready. ;) It works on all system software versions (payload) because it is an RCM app and will run before any CFW or Nintendo code follows.

Before installation, an Emunand must be created by SXOS and also work!

screenshot release start eng.jpg screenshot Emunand install.jpg


Installation Guide:


The installation should be made on the PC, console off, SD in the PC (important because of the Emutendo folder, otherwise there are errors) So not with NXShell or something ...

1. Copy folder emunandswitcher to root SD

An Emunand must already be installed sxos/emunand = Emunand 1

2. Copy desired Emunandbackup into emunandswitcher/folders/emutmp01 = Emunand 2
3. Copy desired emunandbackup into emunandswitcher/folders/emutmp02 = Emunand 3

4. Copy Emuntendo folder content in emunandswitcher/folders/emutendo01 = Emunand 2 Emutendo
5. Copy Emuntendo folder content in emunandswitcher/folders/emutendo02 = Emunand 3 Emutendo

The folder structure will change if an emunand is being switched, please do not change it. The app orientate on the folder which Emunand is installed, etc. If the original state is to be established, install Emunand 1. Then everything is in the state as only one Emunand would be installed.

6. Edit config.ini in the emunandswitcher folder as you like: Edit only the back text! e.g.
Emunand 1 = System software 6.20
Emunand 2 = System software 5.10
Emunand 3 = System software 3.00

Or

Emunand 1 = Testemunand
Emunand 2 = Systememunand
Emunand 3 = Whatever

After an update of an emunand the config.ini has to be edited again manually.

7. Copy emunsw.nro to switch/emunsw/emunsw.nro

8. Copy emunandswitcher 0104449021444000.nsp to SD root

9. SD card back into Switch and boot SXOS

The Emunandswitcher "emunsw.bin" can be started via a Payload Loader like Dongle, TegraRCM etc.
But it is simpler:

10. To start from the Switch menu, install Emunandswitcher 0104449021444000.nsp.

To start from the homebrew menu run Emunandswitcher there.

11. The installation is done and configured you can start ...


Use:

Start the Emunandswitcher via the desired method: Start via NRO in the Homebrew menu, or start NSP in the Switch Menu, or send the payload.

The app informs when starting if a theme is installed and will be removed if necessary. To avoid the starterror when starting another system software version.

Under "Start SXOS ..." the currently active emunand is being updated from config.ini.
Under "Emunand 1 - 3" the input is displayed in the config.ini.

To change an Emunand simply press on the desired icon. The app always informs what is done or if something should be wrong. Nothing is changed as long as the conditions are not right!

Attention: Only boot0.bin, boot1.bin and full.00.bin are checked because there are different sizes of an emunand.

After the change under "SXOS start ..." the old Emunand in white and underneath the change in green is displayed. Press "Start SXOS ...", SXOS will start with the changed emunand.

Repeat these steps for every change you want.
To make the original state just install Emunand 1 and start "SXOS ..."


Info:

The use is as always at your own risk! I'm not responsible if your SD card is broken, your switch explodes or the moon falls to earth! This can happen when using any homebrew and also original software ... The tests were very successful and all bugs should be fixed.

Created by Storm 2019 with Visual Studio and DevKitPro, based on argonNX and hekate, Icons template and some code lines by @mrdude. Thanks to the programmers! Thanks @Muxi for the detailed beta test!

If you do not like it, do not use it and do not write anything here. Thanks! Sorry for my english! Regards Storm21

German Release, Deutsche Version: https://psxtools.de/index.php/Threa...Der-erste-Emunand-wechsler-Deutsch-Mehrere-E/

Download and Source Code:
:download: Release SD files English

Release 1.1
Emunand Switcher 1.1

Introduction:

After an idea, I started to develop this payload app. The app is rather for developers and testers thought but who can use it, with pleasure... This can simultaneously operate a maximum of three Emunands on the SD card and be changed with a few clicks. The Emunands and the content installed on SD are all separate and can be updated with different system software versions.

At the moment this is for SXOS and Atmosphere SD Emunand/Emummc. It works on all system software versions (payload) because it is an RCM app and will run before any CFW or Nintendo code follows.

Release 1.1 changes:

- Atmosphere SD emummc integrated
- Possibility to select the desired CFW at startup
- New folder structure to better distinguish between SXOS and Atmosphere
- Battery Info integrated by mrdude
- LayeredFS and Theme compatible, Titles folder integrated
- Theme warning and possibility to delete theme integrated


Installation guide SXOS:

Before installation, an Emunand must be created by SXOS and also work!

The installation should be made on the PC, console off, SD in the PC (important because of the Emutendo folder, otherwise there are errors) So not with NXShell or something ...

1. Copy folder emunandswitcher to root SD

An Emunand must already be installed sxos/emunand = Emunand 1

2. Copy desired Emunandbackup into emunandswitcher/folders sx/emutmp01 = Emunand 2
3. Copy desired emunandbackup into emunandswitcher/folders sx/emutmp02 = Emunand 3

4. Copy Emuntendo folder content in emunandswitcher/folders sx/emutendo01 = Emunand 2 Emutendo
5. Copy Emuntendo folder content in emunandswitcher/folders sx/emutendo02 = Emunand 3 Emutendo

Optional for Themes and LayeredFS:

- Copy titles folder content in emunandswitcher/folders sx/titles01 = Emunand 2 Titles
- Copy titles folder content in emunandswitcher/folders sx/titles02 = Emunand 3 Titles

The folder structure will change if an emunand is being switched, please do not change it. The app orientate on the folder which Emunand is installed, etc. If the original state is to be established, install Emunand 1. Then everything is in the state as only one Emunand would be installed.

6. Edit config.ini in the emunandswitcher folder as you like: Edit only the back text! e.g.
Emunand 1 = System software 6.20
Emunand 2 = System software 5.10
Emunand 3 = System software 3.00

Or

Emunand 1 = Testemunand
Emunand 2 = Systememunand
Emunand 3 = Whatever

After an update of an emunand the config.ini has to be edited again manually.

7. Copy emunsw.nro to switch/emunsw/emunsw.nro

8. Copy emunandswitcher 0104449021444000.nsp to SD root

9. SD card back into Switch and boot SXOS

The Emunandswitcher "emunsw.bin" can be started via a Payload Loader like Dongle, TegraRCM etc.
But it is simpler:

10. To start from the Switch menu, install Emunandswitcher 0104449021444000.nsp.

To start from the homebrew menu run Emunandswitcher there.

11. The installation is done and configured you can start ...



Installation guide Atmosphere:

Before installation, an SD Emummc must be created by hekate and also work! It is best to save the eMMC folder with the archive bit set on the PC. Also secure the associated Nintendo folder.

The installation should be made on the PC, console off, SD in the PC (important because of the Nintendo folder, otherwise there are errors) So not with NXShell or something ...

1. Copy folder emunandswitcher in root SD and copy folder emummc in root SD

An Emunand must already be installed emummc/SD00 = Emunand 1
Copy the previously saved folder eMMC to emummc/SD00, copy the contents of the Nintendo folder to emummc/SD00/Nintendo

2. Copy desired Emunandbackup to emunandswitcher/folders atm/emutmp01 = Emunand 2
Copy Nintendo folder content in emunandswitcher/folders atm/emutmp01/Nintendo = Emunand 2 Nintendo

3. Copy desired Emunandbackup to emunandswitcher/folders atm/emutmp02 = Emunand 3
Copy Nintendo folder content in emunandswitcher/folders atm/emutmp02/Nintendo = Emunand 3 Nintendo

4. Copy titles folder content in emunandswitcher/folders atm/titles01 copy = Emunand 2 Titles
5. Copy titles folder content in emunandswitcher/folders atm/titles02 copy = Emunand 3 Titles

The folder structure will change if an emunand is being switched, please do not change it. The app is based on the folder which Emunand is installed, etc. If the original state is to be established, install Emunand 1. Then everything is in the state as only one Emunand would be installed.

6. edit config.ini in the emunandswitcher folder as you like: edit only the back text! e.g.
Emuemmc 1 = Systemsoftware 3.00 ATM
Emuemmc 2 = Systemsoftware test
Emuemmc 3 = Systemsoftware XXX ATM


After an update of an emunand the config.ini has to be edited again manually.

7. Copy emunsw.nro to switch/emunsw/emunsw.nro

8. Copy emunandswitcher 0104449021444000.nsp to SD root

9. SD card back into Switch and boot Atmosphere

The Emunandswitcher "emunsw.bin" can be started via a Payload Loader like Dongle, TegraRCM etc.
But it is simpler:

10. To start from the Switch menu, install Emunandswitcher 0104449021444000.nsp.

To start from the homebrew menu, run Emunandswitcher.

11. The installation is done and configured you can start ...

Note: If the Atmosphere CFW version is changed (New SD Files), the fusee-primary.bin payload in the emunandswitcher/payloads folder must also be replaced with the new one. Also the files in the titles folders must be replaced by the new ones. Otherwise Atmosphere will not start anymore.


Use:

Start the Emunandswitcher via the desired method: Start via NRO in the Homebrew menu, or start NSP in the Switch Menu, or send the payload. Select the desired CFW on the switch.

The app informs when starting if a theme is installed. To avoid the startup error when a system software update was made, the theme must be deleted. (Theme del)
The Themes and other LayeredFS files in the titles folder are moved when changing an Emunand, so are each bound to the installed Emunand.

Under "Start SXOS ..." respectively "Start Atmosphere..." the currently active emunand is being updated from config.ini. Under "Emunand 1 - 3" the input is displayed in the config.ini.

To change an Emunand simply press on the desired icon. The app always informs what is done or if something should be wrong. Nothing is changed as long as the conditions are not right!

Attention: With SXOS only boot0.bin, boot1.bin and full.00.bin are checked because there can be different sizes of an emunand. Atmosphere checks if the folder eMMC exists.

After the change under "Start SXOS ..." respectively "Start Atmosphere..." the old Emunand in white and underneath the change in green is displayed. Press "Start SXOS ..." respectively "Start Atmosphere...", the CFW will start with the changed emunand.

Repeat these steps for every change you want.
To make the original state just install Emunand 1 and start CFW.


Info:

The use is as always at your own risk! I'm not responsible if your SD card is broken, your switch explodes or the moon falls to earth! This can happen when using any homebrew and also original software ... The tests were very successful and all bugs should be fixed.

Created by Storm 2019 with Visual Studio and DevKitPro, based on argonNX and hekate, Icons template and some code lines by @mrdude. Thanks to the programmers! Thanks @Muxi for the detailed beta test!

Download:
:download:https://gbatemp.net/attachments/emunand-switcher-1-1-englisch-sd-files-rar.187767/

Release 2.0
Emunand Switcher 2.0 for SXOS and Atmosphere

Introduction:

After an idea, I started to develop this payload app. The app is rather for developers and testers thought but who can use it, with pleasure... This can simultaneously operate a maximum of three Emunands on the SD card and be changed with a few clicks. The Emunands and the content installed on SD are all separate and can be updated with different system software versions.

At the moment this is for SXOS and Atmosphere SD Emunand/Emummc. It works on all system software versions (payload) because it is an RCM app and will run before any CFW or Nintendo code follows.

View attachment 187771 View attachment 187772 View attachment 187773 View attachment 187769 View attachment 187770

Release 2.0 changes:

- Completely new GUI, with live update for theme info, installed emunand display, battery, date and time display.

- Time and date come from the RTC and can be wrong! With Ubuntu the RTC could be set, works then also in Hekate correctly. Fix GMT + 1h and with summer time switching.

- Emunand switcher for SXOS and Atmosphere with the usual functions, switchable via tabs.

- Ability to delete theme before booting for both CFWs under Tools.

- Update possibility for SXOS, copy boot.dat e.g. with nxmtp on the SD, then in the RCM update, reboot

- Payload Loader Argon compatible, displays the payloads from the argon folder, two rows of payloads per tab


Installation guide SXOS:

Before installation, an Emunand must be created by SXOS and also work!

The installation should be made on the PC, console off, SD in the PC (important because of the Emutendo folder, otherwise there are errors) So not with NXShell or something ...

1. Copy folder emunandswitcher to root SD

An Emunand must already be installed sxos/emunand = Emunand 1

2. Copy desired Emunandbackup into emunandswitcher/folders sx/emutmp01 = Emunand 2
3. Copy desired emunandbackup into emunandswitcher/folders sx/emutmp02 = Emunand 3

4. Copy Emuntendo folder content in emunandswitcher/folders sx/emutendo01 = Emunand 2 Emutendo
5. Copy Emuntendo folder content in emunandswitcher/folders sx/emutendo02 = Emunand 3 Emutendo

Optional for Themes and LayeredFS:

- Copy titles folder content in emunandswitcher/folders sx/titles01 = Emunand 2 Titles
- Copy titles folder content in emunandswitcher/folders sx/titles02 = Emunand 3 Titles

The folder structure will change if an emunand is being switched, please do not change it. The app orientate on the folder which Emunand is installed, etc. If the original state is to be established, install Emunand 1. Then everything is in the state as only one Emunand would be installed.

6. Edit config.ini in the emunandswitcher folder as you like: Edit only the back text! e.g.
Emunand 1 = System software 6.20
Emunand 2 = System software 5.10
Emunand 3 = System software 3.00

Or

Emunand 1 = Testemunand
Emunand 2 = Systememunand
Emunand 3 = Whatever

After an update of an emunand the config.ini has to be edited again manually.

7. Copy emunsw.nro to switch/emunsw/emunsw.nro

8. Copy emunandswitcher 0104449021444000.nsp to SD root

9. SD card back into Switch and boot SXOS

The Emunandswitcher "emunsw.bin" can be started via a Payload Loader like Dongle, TegraRCM etc.
But it is simpler:

10. To start from the Switch menu, install Emunandswitcher 0104449021444000.nsp.

To start from the homebrew menu run Emunandswitcher there.

11. The installation is done and configured you can start ...



Installation guide Atmosphere:

Before installation, an SD Emummc must be created by hekate and also work! It is best to save the eMMC folder with the archive bit set on the PC. Also secure the associated Nintendo folder.

The installation should be made on the PC, console off, SD in the PC (important because of the Nintendo folder, otherwise there are errors) So not with NXShell or something ...

1. Copy folder emunandswitcher in root SD and copy folder emummc in root SD

An Emunand must already be installed emummc/SD00 = Emunand 1
Copy the previously saved folder eMMC to emummc/SD00, copy the contents of the Nintendo folder to emummc/SD00/Nintendo

2. Copy desired Emunandbackup to emunandswitcher/folders atm/emutmp01 = Emunand 2
Copy Nintendo folder content in emunandswitcher/folders atm/emutmp01/Nintendo = Emunand 2 Nintendo

3. Copy desired Emunandbackup to emunandswitcher/folders atm/emutmp02 = Emunand 3
Copy Nintendo folder content in emunandswitcher/folders atm/emutmp02/Nintendo = Emunand 3 Nintendo

4. Copy titles folder content in emunandswitcher/folders atm/titles01 copy = Emunand 2 Titles
5. Copy titles folder content in emunandswitcher/folders atm/titles02 copy = Emunand 3 Titles

The folder structure will change if an emunand is being switched, please do not change it. The app is based on the folder which Emunand is installed, etc. If the original state is to be established, install Emunand 1. Then everything is in the state as only one Emunand would be installed.

6. edit config.ini in the emunandswitcher folder as you like: edit only the back text! e.g.
Emuemmc 1 = Systemsoftware 3.00 ATM
Emuemmc 2 = Systemsoftware test
Emuemmc 3 = Systemsoftware XXX ATM


After an update of an emunand the config.ini has to be edited again manually.

7. Copy emunsw.nro to switch/emunsw/emunsw.nro

8. Copy emunandswitcher 0104449021444000.nsp to SD root

9. SD card back into Switch and boot Atmosphere

The Emunandswitcher "emunsw.bin" can be started via a Payload Loader like Dongle, TegraRCM etc.
But it is simpler:

10. To start from the Switch menu, install Emunandswitcher 0104449021444000.nsp.

To start from the homebrew menu, run Emunandswitcher.

11. The installation is done and configured you can start ...

Note: If the Atmosphere CFW version is changed (New SD Files), the fusee-primary.bin payload in the emunandswitcher/payloads folder must also be replaced with the new one. Also the files in the titles folders must be replaced by the new ones. Otherwise Atmosphere will not start anymore.



Use:

Start the Emunandswitcher via the desired method: Start via NRO in the Homebrew menu, or start NSP in the Switch Menu, or send the payload. Select the desired CFW on the switch.

The app informs live if a theme is installed. If a theme is deleted, it will be recognized and displayed. To avoid the startup error when a system software update was made, the theme must be deleted. (Theme del under Tools)
The Themes and other LayeredFS files in the titles folder are moved when changing an Emunand, so are each bound to the installed Emunand.

Select desired tab ...

Under "Start CFW", the currently active emunand is being updated from config.ini.
"Emunand 1 - 3" displays the input in the config.ini.

To change an Emunand simply press on the desired icon. The app always informs what is done or if something should be wrong. Nothing is changed as long as the conditions are not right!

Attention: With SXOS only boot0.bin, boot1.bin and full.00.bin are checked because there can be different sizes of an emunand. Atmosphere checks if the folder eMMC exists.

After the change, the changed emunand is displayed under "Start CFW". Start with the CFW icon, the CFW will start with the changed Emunand.

Repeat these steps for every change you want.
To make the original state just install Emunand 1 and start CFW.

Under Tools, Power Tools option for RCM Reboot, Power off or Reboot OFW

Update SXOS:

- Copy boot.dat e.g. with nxmtp to folder emunandswitcher/updateSX
- Start Emunandswitcher, under Tools click on Update SXOS
- Restart CFW via SXOS Icon or via Payload Tab if Argon is present
- finished!


Info:

The use is as always at your own risk! I'm not responsible if your SD card is broken, your switch explodes or the moon falls to earth! This can happen when using any homebrew and also original software ... The tests were very successful and all bugs should be fixed.

Created by Storm 2019 with Visual Studio, LittlevGL and DevKitPro, based on argonNX and hekate, Icons template and some code lines by @mrdude. Thanks to the programmers! Thanks also to Gabor for LittlevGL!


If you do not like it, do not use it and do not write anything here. Thanks! Sorry for my english! Regards Storm21

German Release, Deutsche Version: https://psxtools.de/index.php/Threa...Der-erste-Emunand-wechsler-Deutsch-Mehrere-E/

Download:
:download: SD Files Release 2.0 Englisch
 
Last edited by Storm21,

lozfaw

Member
Newcomer
Joined
Jul 31, 2017
Messages
10
Trophies
0
Age
31
XP
75
Country
Canada
Do it will do the able to play online on Original frimware on a boot, et use the Emulnand to play Homebrew Offline?
 

ilvampirello2004

Member
Newcomer
Joined
May 17, 2009
Messages
7
Trophies
1
XP
224
Country
Italy
An interesting hiden features .. if you put three empty file boot0.bin boot1.bin e full.00.bin in a emunand folder .. you can use this tools to reboot in system nand.
 

Attachments

  • SysNandReboot.zip
    416 bytes · Views: 197
  • emunand3.bmp
    117.2 KB · Views: 172

lozfaw

Member
Newcomer
Joined
Jul 31, 2017
Messages
10
Trophies
0
Age
31
XP
75
Country
Canada
So with this multiboot, We have no chance to have a OFW for legit play and CFW for Homebrew.

If I play on OFW With Original game all legit and online like all Nohacked switch player do it will be OK to use this for boot a CFW EMULED???
 

loler55

Well-Known Member
Member
Joined
Jan 4, 2012
Messages
1,050
Trophies
1
XP
2,015
Country
Gambia, The
Emunand Switcher

Introduction:

After an idea, I started to develop this payload app. The app is rather for developers and testers thought but who can use it, with pleasure... This can simultaneously operate a maximum of three Emunands on the SD card and be changed with a few clicks. The Emunands and the content installed on SD are all separate and can be updated with different system software versions.

At the moment this is just for SXOS, but as soon as the atmosphere SD Emunand is released on June 15th, I'm ready. ;) It works on all system software versions (payload) because it is an RCM app and will run before any CFW or Nintendo code follows.

Before installation, an Emunand must be created by SXOS and also work!

View attachment 168587 View attachment 168589



Installation Guide:

The installation should be made on the PC, console off, SD in the PC (important because of the Emutendo folder, otherwise there are errors) So not with NXShell or something ...

1. Copy folder emunandswitcher to root SD

An Emunand must already be installed sxos/emunand = Emunand 1

2. Copy desired Emunandbackup into emunandswitcher/folders/emutmp01 = Emunand 2
3. Copy desired emunandbackup into emunandswitcher/folders/emutmp02 = Emunand 3

4. Copy Emuntendo folder content in emunandswitcher/folders/emutendo01 = Emunand 2 Emutendo
5. Copy Emuntendo folder content in emunandswitcher/folders/emutendo02 = Emunand 3 Emutendo

The folder structure will change if an emunand is being switched, please do not change it. The app orientate on the folder which Emunand is installed, etc. If the original state is to be established, install Emunand 1. Then everything is in the state as only one Emunand would be installed.

6. Edit config.ini in the emunandswitcher folder as you like: Edit only the back text! e.g.
Emunand 1 = System software 6.20
Emunand 2 = System software 5.10
Emunand 3 = System software 3.00

Or

Emunand 1 = Testemunand
Emunand 2 = Systememunand
Emunand 3 = Whatever

After an update of an emunand the config.ini has to be edited again manually.

7. Copy emunsw.nro to switch/emunsw/emunsw.nro

8. Copy emunandswitcher 0104449021444000.nsp to SD root

9. SD card back into Switch and boot SXOS

The Emunandswitcher "emunsw.bin" can be started via a Payload Loader like Dongle, TegraRCM etc.
But it is simpler:

10. To start from the Switch menu, install Emunandswitcher 0104449021444000.nsp.

To start from the homebrew menu run Emunandswitcher there.

11. The installation is done and configured you can start ...


Use:

Start the Emunandswitcher via the desired method: Start via NRO in the Homebrew menu, or start NSP in the Switch Menu, or send the payload.

The app informs when starting if a theme is installed and will be removed if necessary. To avoid the starterror when starting another system software version.

Under "Start SXOS ..." the currently active emunand is being updated from config.ini.
Under "Emunand 1 - 3" the input is displayed in the config.ini.

To change an Emunand simply press on the desired icon. The app always informs what is done or if something should be wrong. Nothing is changed as long as the conditions are not right!

Attention: Only boot0.bin, boot1.bin and full.00.bin are checked because there are different sizes of an emunand.

After the change under "SXOS start ..." the old Emunand in white and underneath the change in green is displayed. Press "Start SXOS ...", SXOS will start with the changed emunand.

Repeat these steps for every change you want.
To make the original state just install Emunand 1 and start "SXOS ..."


Info:

The use is as always at your own risk! I'm not responsible if your SD card is broken, your switch explodes or the moon falls to earth! This can happen when using any homebrew and also original software ... The tests were very successful and all bugs should be fixed.

Created by Storm 2019 with Visual Studio and DevKitPro, based on argonNX and hekate, Icons template and some code lines by @mrdude. Thanks to the programmers! Thanks @Muxi for the detailed beta test!

If you do not like it, do not use it and do not write anything here. Thanks! Sorry for my english! Regards Storm21

German Release, Deutsche Version: https://psxtools.de/index.php/Threa...Der-erste-Emunand-wechsler-Deutsch-Mehrere-E/

Download and Source Code:
:download: Release SD files English
:download: Sources
I Hope in the Future WE can have 2 athmosphere emunands with this
 

Storm21

Well-Known Member
OP
Member
Joined
Dec 6, 2018
Messages
152
Trophies
0
XP
2,390
Country
Switzerland
Hello everybody

Short preview of version 2.1 :)

New in Emunandswitcher 2.1:

- Reconstruction of the Tools tab because of additional functions

- CPU temperature display

- Current consumption in mA and battery voltage in V, display green when charging, red when discharging

- Possibility to adjust the brightness of the display using the slider, the set brightness is saved and automatically loaded when the app is restarted.

- Edit the Config.ini directly in the app, after a software update of an Emunand the text can be changed directly before booting.

- Set RTC time and date !!! The time of the real-time clock can be set so that the date is displayed correctly in the Emunandswitcher and hekate. Attention: The time in the home menu of the switch must then be adjust. Afterwards the same time and date will be shown in the RCM and switch menu!

Release soon ;) The English version needs a translation... German Version ready.

screen_1A8D0168.jpg screen_1AEA5F90.jpg screen_174B0AA1.jpg screen_186C43F8.jpg screen_02A37AD6.jpg screen_1B52025A.jpg
 

Storm21

Well-Known Member
OP
Member
Joined
Dec 6, 2018
Messages
152
Trophies
0
XP
2,390
Country
Switzerland
@linuxares
Edit: Can you please change the title? To:

Emunand Switcher 2.1 Multitool for SXOS and Atmosphere

First page adapted! Have fun!

Update to 2.1 :D Happy New Year!

New in Emunandswitcher 2.1:

- Reconstruction of the Tools tab because of additional functions

- CPU temperature display

- Current consumption in mA and battery voltage in V, display green when charging, red when discharging

- Possibility to adjust the brightness of the display using the slider, the set brightness is saved and automatically loaded when the app is restarted.

- Edit the Config.ini directly in the app, after a software update of an Emunand the text can be changed directly before booting.

- Set RTC time and date!!! The time of the real-time clock can be set so that the date is displayed correctly in the Emunandswitcher and hekate. Attention: The time in the home menu of the switch must then be adjust. Afterwards the same time and date will be shown in the RCM and switch menu!
 
Last edited by Storm21,

Storm21

Well-Known Member
OP
Member
Joined
Dec 6, 2018
Messages
152
Trophies
0
XP
2,390
Country
Switzerland
@raxadian You can use it to change the SD files Emunand / Emummc with a few clicks and a few other useful tools... Just test it, no errors are known at the moment, if you find any, just report it here ...

@Quantumcat or @linuxares or some other Mod
Can you please change the title? To:

Emunand Switcher 2.1 Multitool for SXOS and Atmosphere
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
    SylverReZ @ SylverReZ: Not awesome if it has AI shit bundled with it. :rofl2: +1